diff --git a/README.md b/README.md new file mode 100644 index 0000000..9505d9e --- /dev/null +++ b/README.md @@ -0,0 +1,12 @@ + +lbr +--- +Contains Eagle libraries + +dru +--- +Contains files with design rule checks + +cam +--- +Contains cam jobs to generate gerber files diff --git a/cam/DRILEGEND.CFG b/cam/DRILEGEND.CFG new file mode 100644 index 0000000..2aead80 --- /dev/null +++ b/cam/DRILEGEND.CFG @@ -0,0 +1,42 @@ +InputUserCfg = 1 +SymbolLayer = 144 +SymbolSize = 40 +SymbolWidth = 4 +TextSize = 70.0000 +TextRatio = 5 +IdxFnt = 0 +decMM = 2 +decMIL = 0 +SortHoles = 1 +TolPlated = 0.02 +TolNonPlated = 0.03 +PlatedStatusNot = NOT +PlatedStatusBoth = BOTH +PlatedStatusYes = YES +VerticalChart = 1 +HighCellFactor = 1.10 +WideCellFactor = 1.10 +CellOutline = 4 +TitleOutline = 4 +TableOutline = 8 +SymbTitle = Sym +ToolTitle = N° +MMTitle = MM +MilTitle = Mils +MicTitle = Mic +QtyTitle = Qty +TypeTitle = Plated +ToleTitle = Tol +SymbRank = 1 +ToolRank = 2 +MMRank = 4 +MilRank = 3 +MicRank = 0 +QtyRank = 5 +TypeRank = 6 +ToleRank = 0 +OutputDrillRack = 0 +DrillRackFile = DRILLRACK.DRL +Unit = 0 +OutputUserCfg = 1 +UserCfgFile = DRILEGEND.CFG diff --git a/cam/ITeadstudio_CAM6.cam b/cam/ITeadstudio_CAM6.cam new file mode 100644 index 0000000..6178359 --- /dev/null +++ b/cam/ITeadstudio_CAM6.cam @@ -0,0 +1,245 @@ +[CAM Processor Job] +Description[de]="Erzeugt Extended-Gerber-Format (RS274X)

\nDieser CAM-Job besteht aus fünf Arbeitsschritten und erzeugt Fertigungsdaten für eine zweilagige Platine.

\nDie fünf Gerberdateien enthalten Daten für:
\nBestückungsseite *.cmp
\nLötseite *.sol
\nBestückungsdruck oben *.plc
\nLötstoplack Bestückungsseite *.stc
\nLötstoplack Lötseite *.sts
" +Description[en]="Generates Extended Gerber Format

\nThis CAM job consists of five sections that generate data for a two layer board.

\nYou will get five gerber files that contain data for:
\ncomponent side *.cmp
\nsolder side *.sol
\nsilkscreen component side *.plc
\nsolder stop component side *.stc
\nsolder stop solder sid *.sts
" +Section=Sec_1 +Section=Sec_2 +Section=Sec_3 +Section=Sec_4 +Section=Sec_5 +Section=Sec_6 +Section=Sec_7 +Section=Sec_8 +Section=Sec_9 +Section=Sec_10 +Section=Sec_11 + +[Sec_1] +Name[de]="Bohrdaten" +Name[en]="drill data" +Name[zh]="drill data" +Prompt[en]="" +Prompt[zh]="" +Device="EXCELLON" +Wheel="" +Rack="" +Scale=1 +Output="%N.TXT" +Flags="0 0 0 1 0 0 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 44 45" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" + +[Sec_2] +Name[de]="Kantenfräsen" +Name[en]="edge milling" +Name[zh]="edge milling" +Prompt[en]="" +Prompt[zh]="" +Device="GERBER_RS274X" +Wheel="" +Rack="" +Scale=1 +Output="%N.GML" +Flags="0 0 0 1 0 1 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 20 46" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" + +[Sec_3] +Name[de]="Bohr & Platinenumrandung" +Name[en]="drill&boardoutline" +Name[zh]="drill&boardoutline" +Prompt[en]="" +Prompt[zh]="" +Device="GERBER_RS274X" +Wheel=".whl" +Rack="" +Scale=1 +Output="%N.do" +Flags="0 0 0 1 0 1 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 20 44 45 144" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" + +[Sec_4] +Name[de]="pad maske unten" +Name[en]="padmask bottom" +Name[zh]="padmask bottom" +Prompt[en]="" +Prompt[zh]="" +Device="GERBER_RS274X" +Wheel=".whl" +Rack="" +Scale=1 +Output="%N.GBP" +Flags="0 0 0 1 0 1 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 20 32" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" + +[Sec_5] +Name[de]="pad maske top" +Name[en]="padmask top" +Name[zh]="padmask top" +Prompt[en]="" +Prompt[zh]="" +Device="GERBER_RS274X" +Wheel=".whl" +Rack="" +Scale=1 +Output="%N.GTP" +Flags="0 0 0 1 0 1 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 20 31" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" + +[Sec_6] +Name[de]="Lötstopplack unten" +Name[en]="solder mask bottom" +Name[zh]="solder mask bottom" +Prompt[en]="" +Prompt[zh]="" +Device="GERBER_RS274X" +Wheel=".whl" +Rack="" +Scale=1 +Output="%N.GBS" +Flags="0 0 0 1 0 1 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 20 30" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" + +[Sec_7] +Name[de]="Lötstopplack top" +Name[en]="solder mask top" +Name[zh]="solder mask top" +Prompt[en]="" +Prompt[zh]="" +Device="GERBER_RS274X" +Wheel=".whl" +Rack="" +Scale=1 +Output="%N.GTS" +Flags="0 0 0 1 0 1 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 20 29" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" + +[Sec_8] +Name[de]="seide unten" +Name[en]="silk bottom" +Name[zh]="silk bottom" +Prompt[en]="" +Prompt[zh]="" +Device="GERBER_RS274X" +Wheel=".whl" +Rack="" +Scale=1 +Output="%N.GBO" +Flags="0 0 0 1 0 1 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 20 22 26" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" + +[Sec_9] +Name[de]="seide top" +Name[en]="silk top" +Name[zh]="silk top" +Prompt[en]="" +Prompt[zh]="" +Device="GERBER_RS274X" +Wheel=".whl" +Rack="" +Scale=1 +Output="%N.GTO" +Flags="0 0 0 1 0 1 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 20 21 25" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" + +[Sec_10] +Name[de]="unten Kupfer" +Name[en]="bottom copper" +Name[zh]="bottom copper" +Prompt[en]="" +Prompt[zh]="" +Device="GERBER_RS274X" +Wheel=".whl" +Rack="" +Scale=1 +Output="%N.GBL" +Flags="0 0 0 1 0 1 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 16 17 18 20" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" + +[Sec_11] +Name[de]="top Kupfer" +Name[en]="top copper" +Name[zh]="top copper" +Prompt[en]="" +Prompt[zh]="" +Device="GERBER_RS274X" +Wheel=".whl" +Rack="" +Scale=1 +Output="%N.GTL" +Flags="0 0 0 1 0 1 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 1 17 18 20" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" diff --git a/dru/ITEADstudio_DRC.dru b/dru/ITEADstudio_DRC.dru new file mode 100644 index 0000000..0230db0 --- /dev/null +++ b/dru/ITEADstudio_DRC.dru @@ -0,0 +1,74 @@ +description[de] = EAGLE Design Rules\n

\nDie Standard-Design-Rules sind so gewählt, dass sie für \ndie meisten Anwendungen passen. Sollte ihre Platine \nbesondere Anforderungen haben, treffen Sie die erforderlichen\nEinstellungen hier und speichern die Design Rules unter \neinem neuen Namen ab. +description[en] = EAGLE Design Rules\n

\nThe default Design Rules have been set to cover\na wide range of applications. Your particular design\nmay have different requirements, so please make the\nnecessary adjustments and save your customized\ndesign rules under a new name. +description[zh] = Seeed Studio EAGLE Design Rules\n +layerSetup = (1*16) +mtCopper = 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm +mtIsolate = 1.5mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm +mdWireWire = 6mil +mdWirePad = 6mil +mdWireVia = 6mil +mdPadPad = 6mil +mdPadVia = 6mil +mdViaVia = 6mil +mdSmdPad = 0mil +mdSmdVia = 0mil +mdSmdSmd = 0mil +mdViaViaSameLayer = 8mil +mnLayersViaInSmd = 2 +mdCopperDimension = 10mil +mdDrill = 10mil +mdSmdStop = 0mil +msWidth = 6mil +msDrill = 12mil +msMicroVia = 12mil +msBlindViaRatio = 0.500000 +rvPadTop = 0.250000 +rvPadInner = 0.250000 +rvPadBottom = 0.250000 +rvViaOuter = 0.250000 +rvViaInner = 0.250000 +rvMicroViaOuter = 0.250000 +rvMicroViaInner = 0.250000 +rlMinPadTop = 10mil +rlMaxPadTop = 20mil +rlMinPadInner = 10mil +rlMaxPadInner = 20mil +rlMinPadBottom = 10mil +rlMaxPadBottom = 20mil +rlMinViaOuter = 6mil +rlMaxViaOuter = 20mil +rlMinViaInner = 6mil +rlMaxViaInner = 20mil +rlMinMicroViaOuter = 4mil +rlMaxMicroViaOuter = 20mil +rlMinMicroViaInner = 4mil +rlMaxMicroViaInner = 20mil +psTop = -1 +psBottom = -1 +psFirst = 0 +psElongationLong = 100 +psElongationOffset = 100 +mvStopFrame = 1.000000 +mvCreamFrame = 0.000000 +mlMinStopFrame = 2mil +mlMaxStopFrame = 2mil +mlMinCreamFrame = 0mil +mlMaxCreamFrame = 0mil +mlViaStopLimit = 100mil +srRoundness = 0.000000 +srMinRoundness = 0mil +srMaxRoundness = 0mil +slThermalGap = 0.500000 +slMinThermalGap = 20mil +slMaxThermalGap = 100mil +slAnnulusIsolate = 20mil +slThermalIsolate = 10mil +slAnnulusRestring = 0 +slThermalRestring = 1 +slThermalsForVias = 0 +checkGrid = 0 +checkAngle = 0 +checkFont = 1 +checkRestrict = 0 +useDiameter = 13 +maxErrors = 50 diff --git a/SparkFun-LED.lbr b/lbr/SparkFun-LED.lbr similarity index 100% rename from SparkFun-LED.lbr rename to lbr/SparkFun-LED.lbr diff --git a/SparkFun-PowerIC.lbr b/lbr/SparkFun-PowerIC.lbr similarity index 100% rename from SparkFun-PowerIC.lbr rename to lbr/SparkFun-PowerIC.lbr diff --git a/headers(.1in).lbr b/lbr/headers(.1in).lbr similarity index 100% rename from headers(.1in).lbr rename to lbr/headers(.1in).lbr diff --git a/reichelt.lbr b/lbr/reichelt.lbr similarity index 100% rename from reichelt.lbr rename to lbr/reichelt.lbr