Arduino/Repetier/Communication.cpp

638 lines
25 KiB
C++
Raw Normal View History

/*
This file is part of Repetier-Firmware.
Repetier-Firmware is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Repetier-Firmware is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Repetier-Firmware. If not, see <http://www.gnu.org/licenses/>.
This firmware is a nearly complete rewrite of the sprinter firmware
by kliment (https://github.com/kliment/Sprinter)
which based on Tonokip RepRap firmware rewrite based off of Hydra-mmm firmware.
*/
#include "Repetier.h"
2016-01-15 20:42:10 +01:00
#if UI_DISPLAY_TYPE != NO_DISPLAY
uint8_t Com::selectedLanguage;
2016-07-02 18:11:43 +02:00
#endif
2016-01-15 20:42:10 +01:00
#ifndef MACHINE_TYPE
2016-07-02 18:11:43 +02:00
#if DRIVE_SYSTEM == DELTA
2016-01-15 20:42:10 +01:00
#define MACHINE_TYPE "Delta"
#elif DRIVE_SYSTEM == CARTESIAN
#define MACHINE_TYPE "Mendel"
#else
2016-01-15 20:42:10 +01:00
#define MACHINE_TYPE "Core_XY"
2016-07-02 18:11:43 +02:00
#endif
#endif
#ifndef FIRMWARE_URL
#define FIRMWARE_URL "https://github.com/repetier/Repetier-Firmware/"
2016-01-15 20:42:10 +01:00
#endif // FIRMWARE_URL
FSTRINGVALUE(Com::tFirmware,"FIRMWARE_NAME:Repetier_" REPETIER_VERSION " FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:1.0 MACHINE_TYPE:" MACHINE_TYPE " EXTRUDER_COUNT:" XSTR(NUM_EXTRUDER) " REPETIER_PROTOCOL:3")
FSTRINGVALUE(Com::tDebug,"Debug:")
FSTRINGVALUE(Com::tOk,"ok")
FSTRINGVALUE(Com::tNewline,"\r\n")
FSTRINGVALUE(Com::tNAN,"NAN")
FSTRINGVALUE(Com::tINF,"INF")
FSTRINGVALUE(Com::tError,"Error:")
FSTRINGVALUE(Com::tInfo,"Info:")
FSTRINGVALUE(Com::tWarning,"Warning:")
FSTRINGVALUE(Com::tResend,"Resend:")
FSTRINGVALUE(Com::tEcho,"Echo:")
FSTRINGVALUE(Com::tOkSpace,"ok ")
FSTRINGVALUE(Com::tWrongChecksum,"Wrong checksum")
FSTRINGVALUE(Com::tMissingChecksum,"Missing checksum")
FSTRINGVALUE(Com::tFormatError,"Format error")
FSTRINGVALUE(Com::tDonePrinting,"Done printing file")
FSTRINGVALUE(Com::tX," X")
FSTRINGVALUE(Com::tY," Y")
FSTRINGVALUE(Com::tZ," Z")
FSTRINGVALUE(Com::tE," E")
FSTRINGVALUE(Com::tF," F")
FSTRINGVALUE(Com::tS," S")
FSTRINGVALUE(Com::tP," P")
FSTRINGVALUE(Com::tI," I")
FSTRINGVALUE(Com::tJ," J")
FSTRINGVALUE(Com::tR," R")
FSTRINGVALUE(Com::tSDReadError,"SD read error")
FSTRINGVALUE(Com::tExpectedLine,"Error:expected line ")
FSTRINGVALUE(Com::tGot," got ")
FSTRINGVALUE(Com::tSkip,"skip ")
FSTRINGVALUE(Com::tBLK,"BLK ")
FSTRINGVALUE(Com::tStart,"start")
FSTRINGVALUE(Com::tPowerUp,"PowerUp")
FSTRINGVALUE(Com::tExternalReset,"External Reset")
FSTRINGVALUE(Com::tBrownOut,"Brown out Reset")
FSTRINGVALUE(Com::tWatchdog,"Watchdog Reset")
FSTRINGVALUE(Com::tSoftwareReset,"Software Reset")
FSTRINGVALUE(Com::tUnknownCommand,"Unknown command:")
FSTRINGVALUE(Com::tFreeRAM,"Free RAM:")
FSTRINGVALUE(Com::tXColon,"X:")
FSTRINGVALUE(Com::tSpaceXColon," X:")
FSTRINGVALUE(Com::tSpaceYColon," Y:")
FSTRINGVALUE(Com::tSpaceZColon," Z:")
FSTRINGVALUE(Com::tSpaceEColon," E:")
FSTRINGVALUE(Com::tTColon,"T:")
FSTRINGVALUE(Com::tSpaceBColon," B:")
FSTRINGVALUE(Com::tSpaceAtColon," @:")
FSTRINGVALUE(Com::tSpaceT," T")
FSTRINGVALUE(Com::tSpaceAt," @")
FSTRINGVALUE(Com::tSpaceBAtColon," B@:")
FSTRINGVALUE(Com::tSpaceRaw," RAW")
FSTRINGVALUE(Com::tColon,":")
FSTRINGVALUE(Com::tSlash,"/")
FSTRINGVALUE(Com::tSpaceSlash," /")
2016-07-02 18:11:43 +02:00
FSTRINGVALUE(Com::tFatal,"fatal:")
#if JSON_OUTPUT
FSTRINGVALUE(Com::tJSONDir,"{\"dir\":\"")
FSTRINGVALUE(Com::tJSONFiles,"\",\"files\":[")
FSTRINGVALUE(Com::tJSONArrayEnd,"]}")
FSTRINGVALUE(Com::tJSONErrorStart,"{\"err\":\"")
FSTRINGVALUE(Com::tJSONErrorEnd,"\"}")
FSTRINGVALUE(Com::tJSONFileInfoStart, "{\"err\":0,\"size\":");
FSTRINGVALUE(Com::tJSONFileInfoHeight, ",\"height\":");
FSTRINGVALUE(Com::tJSONFileInfoLayerHeight, ",\"layerHeight\":");
FSTRINGVALUE(Com::tJSONFileInfoFilament, ",\"filament\":[");
FSTRINGVALUE(Com::tJSONFileInfoGeneratedBy, "],\"generatedBy\":\"");
FSTRINGVALUE(Com::tJSONFileInfoName, ",\"fileName\":\"");
#endif // JSON_OUTPUT
FSTRINGVALUE(Com::tSpeedMultiply,"SpeedMultiply:")
FSTRINGVALUE(Com::tFlowMultiply,"FlowMultiply:")
FSTRINGVALUE(Com::tFanspeed,"Fanspeed:")
2016-01-15 20:42:10 +01:00
FSTRINGVALUE(Com::tFan2speed,"Fanspeed2:")
FSTRINGVALUE(Com::tPrintedFilament,"Printed filament:")
FSTRINGVALUE(Com::tPrintingTime,"Printing time:")
FSTRINGVALUE(Com::tSpacem,"m ")
FSTRINGVALUE(Com::tSpaceDaysSpace," days ")
FSTRINGVALUE(Com::tSpaceHoursSpace," hours ")
FSTRINGVALUE(Com::tSpaceMin," min")
FSTRINGVALUE(Com::tInvalidArc,"Invalid arc")
FSTRINGVALUE(Com::tComma,",")
FSTRINGVALUE(Com::tSpace," ")
FSTRINGVALUE(Com::tYColon,"Y:")
FSTRINGVALUE(Com::tZColon,"Z:")
FSTRINGVALUE(Com::tE0Colon,"E0:")
FSTRINGVALUE(Com::tE1Colon,"E1:")
FSTRINGVALUE(Com::tMS1MS2Pins,"MS1,MS2 Pins")
FSTRINGVALUE(Com::tSetOutputSpace,"Set output: ")
FSTRINGVALUE(Com::tGetInputSpace,"Get Input: ")
FSTRINGVALUE(Com::tSpaceToSpace," to ")
FSTRINGVALUE(Com::tSpaceIsSpace," is ")
FSTRINGVALUE(Com::tHSpace,"H ")
FSTRINGVALUE(Com::tLSpace,"L ")
FSTRINGVALUE(Com::tXMinColon,"x_min:")
FSTRINGVALUE(Com::tXMaxColon,"x_max:")
FSTRINGVALUE(Com::tYMinColon,"y_min:")
FSTRINGVALUE(Com::tYMaxColon,"y_max:")
FSTRINGVALUE(Com::tZMinColon,"z_min:")
FSTRINGVALUE(Com::tZMaxColon,"z_max:")
FSTRINGVALUE(Com::tZ2MinMaxColon,"z2_minmax:")
FSTRINGVALUE(Com::tJerkColon,"Jerk:")
FSTRINGVALUE(Com::tZJerkColon," ZJerk:")
FSTRINGVALUE(Com::tLinearStepsColon," linear steps:")
FSTRINGVALUE(Com::tQuadraticStepsColon," quadratic steps:")
FSTRINGVALUE(Com::tCommaSpeedEqual,", speed=")
FSTRINGVALUE(Com::tEEPROMUpdated,"EEPROM updated")
FSTRINGVALUE(Com::tLinearLColon,"linear L:")
FSTRINGVALUE(Com::tQuadraticKColon," quadratic K:")
FSTRINGVALUE(Com::tFilamentSlipping,"Filament slipping")
FSTRINGVALUE(Com::tPauseCommunication,"// action:pause")
FSTRINGVALUE(Com::tContinueCommunication,"// action:resume")
#if DRIVE_SYSTEM == DELTA
FSTRINGVALUE(Com::tMeasurementReset,"Measurement reset.")
FSTRINGVALUE(Com::tMeasureDeltaSteps,"Measure/delta (Steps) =")
FSTRINGVALUE(Com::tMeasureDelta,"Measure/delta =")
FSTRINGVALUE(Com::tMeasureOriginReset,"Measured origin set. Measurement reset.")
FSTRINGVALUE(Com::tMeasurementAbortedOrigin,"Origin measurement cannot be set. Use only Z-Cartesian (straight up and down) movements and try again.")
FSTRINGVALUE(Com::tLevelingCalc,"Leveling calc:")
FSTRINGVALUE(Com::tTower1,"Tower 1:")
FSTRINGVALUE(Com::tTower2,"Tower 2:")
FSTRINGVALUE(Com::tTower3,"Tower 3:")
FSTRINGVALUE(Com::tDeltaAlphaA,"Alpha A(210):")
FSTRINGVALUE(Com::tDeltaAlphaB,"Alpha B(330):")
FSTRINGVALUE(Com::tDeltaAlphaC,"Alpha C(90):")
FSTRINGVALUE(Com::tDeltaRadiusCorrectionA,"Delta Radius A(0):")
FSTRINGVALUE(Com::tDeltaRadiusCorrectionB,"Delta Radius B(0):")
FSTRINGVALUE(Com::tDeltaRadiusCorrectionC,"Delta Radius C(0):")
#endif // DRIVE_SYSTEM
2016-07-02 18:11:43 +02:00
#if NONLINEAR_SYSTEM
#if DRIVE_SYSTEM == TUGA
FSTRINGVALUE(Com::tInvalidDeltaCoordinate,"Invalid coordinate - move ignored")
FSTRINGVALUE(Com::tDBGDeltaNoMoveinDSegment,"No move in delta segment with > 1 segment. This should never happen and may cause a problem!")
2016-07-02 18:11:43 +02:00
#elif DRIVE_SYSTEM == DELTA
FSTRINGVALUE(Com::tInvalidDeltaCoordinate,"Invalid delta coordinate - move ignored")
FSTRINGVALUE(Com::tDBGDeltaNoMoveinDSegment,"No move in delta segment with > 1 segment. This should never happen and may cause a problem!")
#else
FSTRINGVALUE(Com::tInvalidDeltaCoordinate,"Invalid coordinate - move ignored")
FSTRINGVALUE(Com::tDBGDeltaNoMoveinDSegment,"No move in segment with > 1 segment. This should never happen and may cause a problem!")
#endif
#endif
#if DRIVE_SYSTEM==TUGA
FSTRINGVALUE(Com::tEPRDiagonalRodLength,"Long arm length [mm]")
#endif // DRIVE_SYSTEM
#ifdef DEBUG_GENERIC
FSTRINGVALUE(Com::tGenTemp,"GenTemp:")
#endif // DEBUG_GENERICFSTRINGVALUE(Com::,"")
FSTRINGVALUE(Com::tTargetExtr,"TargetExtr")
FSTRINGVALUE(Com::tTargetBedColon,"TargetBed:")
FSTRINGVALUE(Com::tPIDAutotuneStart,"PID Autotune start")
FSTRINGVALUE(Com::tAPIDBias," bias: ")
FSTRINGVALUE(Com::tAPIDD," d: ")
FSTRINGVALUE(Com::tAPIDMin," min: ")
FSTRINGVALUE(Com::tAPIDMax," max: ")
FSTRINGVALUE(Com::tAPIDKu," Ku: ")
FSTRINGVALUE(Com::tAPIDTu," Tu: ")
FSTRINGVALUE(Com::tAPIDClassic," Classic PID")
FSTRINGVALUE(Com::tAPIDKp," Kp: ")
FSTRINGVALUE(Com::tAPIDKi," Ki: ")
FSTRINGVALUE(Com::tAPIDKd," Kd: ")
2016-07-02 18:11:43 +02:00
FSTRINGVALUE(Com::tAPIDFailedHigh,"PID Autotune failed! Temperature too high")
FSTRINGVALUE(Com::tAPIDFailedTimeout,"PID Autotune failed! timeout")
FSTRINGVALUE(Com::tAPIDFinished,"PID Autotune finished ! Place the Kp, Ki and Kd constants in the Configuration.h or EEPROM")
FSTRINGVALUE(Com::tMTEMPColon,"MTEMP:")
FSTRINGVALUE(Com::tHeatedBed,"heated bed")
FSTRINGVALUE(Com::tExtruderSpace,"extruder ")
FSTRINGVALUE(Com::tTempSensorDefect,": temp sensor defect")
FSTRINGVALUE(Com::tTempSensorWorking,": working")
FSTRINGVALUE(Com::tDryModeUntilRestart,"Printer set into dry run mode until restart!")
#ifdef DEBUG_QUEUE_MOVE
FSTRINGVALUE(Com::tDBGId,"ID:")
FSTRINGVALUE(Com::tDBGVStartEnd,"vStart/End:")
FSTRINGVALUE(Com::tDBAccelSteps,"accel/decel steps:")
FSTRINGVALUE(Com::tDBGStartEndSpeed,"st./end speed:")
FSTRINGVALUE(Com::tDBGFlags,"Flags:")
FSTRINGVALUE(Com::tDBGJoinFlags,"joinFlags:")
FSTRINGVALUE(Com::tDBGDelta,"Delta")
FSTRINGVALUE(Com::tDBGDir,"Dir:")
FSTRINGVALUE(Com::tDBGFullSpeed,"fullSpeed:")
FSTRINGVALUE(Com::tDBGVMax,"vMax:")
FSTRINGVALUE(Com::tDBGAcceleration,"Acceleration:")
FSTRINGVALUE(Com::tDBGAccelerationPrim,"Acceleration Prim:")
FSTRINGVALUE(Com::tDBGRemainingSteps,"Remaining steps:")
FSTRINGVALUE(Com::tDBGAdvanceFull,"advanceFull:")
FSTRINGVALUE(Com::tDBGAdvanceRate,"advanceRate:")
FSTRINGVALUE(Com::tDBGLimitInterval,"LimitInterval:")
FSTRINGVALUE(Com::tDBGMoveDistance,"Move distance on the XYZ space:")
FSTRINGVALUE(Com::tDBGCommandedFeedrate,"Commanded feedrate:")
FSTRINGVALUE(Com::tDBGConstFullSpeedMoveTime,"Constant full speed move time:")
#endif // DEBUG_QUEUE_MOVEFSTRINGVALUE(Com::,"")
#ifdef DEBUG_DELTA_OVERFLOW
FSTRINGVALUE(Com::tDBGDeltaOverflow,"Delta overflow:")
#endif // DEBUG_DELTA_OVERFLOW
#ifdef DEBUG_SPLIT
FSTRINGVALUE(Com::tDBGDeltaSeconds,"Seconds:")
FSTRINGVALUE(Com::tDBGDeltaZDelta,"Z delta:")
FSTRINGVALUE(Com::tDBGDeltaSegments,"Segments:")
FSTRINGVALUE(Com::tDBGDeltaNumLines,"Num lines:")
FSTRINGVALUE(Com::tDBGDeltaSegmentsPerLine,"segments_per_line:")
FSTRINGVALUE(Com::tDBGDeltaMaxDS,"Max DS:")
FSTRINGVALUE(Com::tDBGDeltaStepsPerSegment,"Steps Per Segment:")
FSTRINGVALUE(Com::tDBGDeltaVirtualAxisSteps,"Virtual axis steps:")
#endif
#ifdef DEBUG_STEPCOUNT
FSTRINGVALUE(Com::tDBGMissedSteps,"Missed steps:")
#endif // DEBUG_STEPCOUNT
#if FEATURE_Z_PROBE
FSTRINGVALUE(Com::tZProbe,"Z-probe:")
FSTRINGVALUE(Com::tZProbeAverage,"Z-probe average height:")
FSTRINGVALUE(Com::tZProbeZReset,"Reset Z height")
FSTRINGVALUE(Com::tZProbeState,"Z-probe state:")
FSTRINGVALUE(Com::tZProbeStartScript,Z_PROBE_START_SCRIPT)
FSTRINGVALUE(Com::tZProbeEndScript,Z_PROBE_FINISHED_SCRIPT)
FSTRINGVALUE(Com::tHitZProbe,"Hit z-probe")
#endif
FSTRINGVALUE(Com::tAutolevelReset,"Autolevel matrix reset")
FSTRINGVALUE(Com::tAutolevelEnabled,"Autoleveling enabled")
FSTRINGVALUE(Com::tAutolevelDisabled,"Autoleveling disabled")
FSTRINGVALUE(Com::tTransformationMatrix,"Transformation matrix:")
FSTRINGVALUE(Com::tZProbeFailed,"Z-probe failed")
FSTRINGVALUE(Com::tZProbeMax,"Z-probe max:")
FSTRINGVALUE(Com::tZProbePrinterHeight,"Printer height:")
//FSTRINGVALUE(Com::,"")
#ifdef WAITING_IDENTIFIER
FSTRINGVALUE(Com::tWait,WAITING_IDENTIFIER)
#endif // WAITING_IDENTIFIER
#if EEPROM_MODE == 0
FSTRINGVALUE(Com::tNoEEPROMSupport,"No EEPROM support compiled.\r\n")
#else
2016-01-15 20:42:10 +01:00
FSTRINGVALUE(Com::tZProbeOffsetZ, "Coating thickness [mm]")
#if FEATURE_Z_PROBE
FSTRINGVALUE(Com::tZProbeHeight,"Z-probe height [mm]")
FSTRINGVALUE(Com::tZProbeBedDitance,"Max. z-probe - bed dist. [mm]")
FSTRINGVALUE(Com::tZProbeOffsetX,"Z-probe offset x [mm]")
FSTRINGVALUE(Com::tZProbeOffsetY,"Z-probe offset y [mm]")
FSTRINGVALUE(Com::tZProbeSpeed,"Z-probe speed [mm/s]")
FSTRINGVALUE(Com::tZProbeSpeedXY,"Z-probe x-y-speed [mm/s]")
2016-01-15 20:42:10 +01:00
FSTRINGVALUE(Com::tZProbeX1,"Z-probe X1 [mm]")
FSTRINGVALUE(Com::tZProbeY1,"Z-probe Y1 [mm]")
FSTRINGVALUE(Com::tZProbeX2,"Z-probe X2 [mm]")
FSTRINGVALUE(Com::tZProbeY2,"Z-probe Y2 [mm]")
FSTRINGVALUE(Com::tZProbeX3,"Z-probe X3 [mm]")
FSTRINGVALUE(Com::tZProbeY3,"Z-probe Y3 [mm]")
FSTRINGVALUE(Com::zZProbeBendingCorA,"Z-probe bending correction A [mm]")
FSTRINGVALUE(Com::zZProbeBendingCorB,"Z-probe bending correction B [mm]")
FSTRINGVALUE(Com::zZProbeBendingCorC,"Z-probe bending correction C [mm]")
#endif
#if FEATURE_AXISCOMP
FSTRINGVALUE(Com::tAxisCompTanXY,"tanXY Axis Compensation")
FSTRINGVALUE(Com::tAxisCompTanYZ,"tanYZ Axis Compensation")
FSTRINGVALUE(Com::tAxisCompTanXZ,"tanXZ Axis Compensation")
#endif
#if FEATURE_AUTOLEVEL
FSTRINGVALUE(Com::tAutolevelActive,"Autolevel active (1/0)")
#endif
FSTRINGVALUE(Com::tConfigStoredEEPROM,"Configuration stored to EEPROM.")
FSTRINGVALUE(Com::tConfigLoadedEEPROM,"Configuration loaded from EEPROM.")
FSTRINGVALUE(Com::tEPRConfigResetDefaults,"Configuration reset to defaults.")
FSTRINGVALUE(Com::tEPRProtocolChanged,"Protocol version changed, upgrading")
FSTRINGVALUE(Com::tEPR0,"EPR:0 ")
FSTRINGVALUE(Com::tEPR1,"EPR:1 ")
FSTRINGVALUE(Com::tEPR2,"EPR:2 ")
FSTRINGVALUE(Com::tEPR3,"EPR:3 ")
FSTRINGVALUE(Com::tEPRBaudrate,"Baudrate")
2016-01-15 20:42:10 +01:00
FSTRINGVALUE(Com::tLanguage,"Language")
FSTRINGVALUE(Com::tEPRFilamentPrinted,"Filament printed [m]")
FSTRINGVALUE(Com::tEPRPrinterActive,"Printer active [s]")
FSTRINGVALUE(Com::tEPRMaxInactiveTime,"Max. inactive time [ms,0=off]")
FSTRINGVALUE(Com::tEPRStopAfterInactivty,"Stop stepper after inactivity [ms,0=off]")
FSTRINGVALUE(Com::tEPRXHomePos,"X min pos [mm]")
FSTRINGVALUE(Com::tEPRYHomePos,"Y min pos [mm]")
FSTRINGVALUE(Com::tEPRZHomePos,"Z min pos [mm]")
FSTRINGVALUE(Com::tEPRXMaxLength,"X max length [mm]")
FSTRINGVALUE(Com::tEPRYMaxLength,"Y max length [mm]")
FSTRINGVALUE(Com::tEPRZMaxLength,"Z max length [mm]")
FSTRINGVALUE(Com::tEPRXBacklash,"X backlash [mm]")
FSTRINGVALUE(Com::tEPRYBacklash,"Y backlash [mm]")
FSTRINGVALUE(Com::tEPRZBacklash,"Z backlash [mm]")
FSTRINGVALUE(Com::tEPRMaxJerk,"Max. jerk [mm/s]")
2016-01-15 20:42:10 +01:00
FSTRINGVALUE(Com::tEPRAccelerationFactorAtTop,"Acceleration factor at top [%,100=like bottom]")
2016-07-02 18:11:43 +02:00
#if NONLINEAR_SYSTEM
FSTRINGVALUE(Com::tEPRSegmentsPerSecondPrint,"Segments/s for printing")
FSTRINGVALUE(Com::tEPRSegmentsPerSecondTravel,"Segments/s for travel")
#endif
#if DRIVE_SYSTEM==DELTA
FSTRINGVALUE(Com::tEPRZAcceleration,"Acceleration [mm/s^2]")
FSTRINGVALUE(Com::tEPRZTravelAcceleration,"Travel acceleration [mm/s^2]")
FSTRINGVALUE(Com::tEPRZStepsPerMM,"Steps per mm")
FSTRINGVALUE(Com::tEPRZMaxFeedrate,"Max. feedrate [mm/s]")
FSTRINGVALUE(Com::tEPRZHomingFeedrate,"Homing feedrate [mm/s]")
FSTRINGVALUE(Com::tEPRDiagonalRodLength,"Diagonal rod length [mm]")
FSTRINGVALUE(Com::tEPRHorizontalRadius,"Horizontal rod radius at 0,0 [mm]")
FSTRINGVALUE(Com::tEPRTowerXOffset,"Tower X endstop offset [steps]")
FSTRINGVALUE(Com::tEPRTowerYOffset,"Tower Y endstop offset [steps]")
FSTRINGVALUE(Com::tEPRTowerZOffset,"Tower Z endstop offset [steps]")
FSTRINGVALUE(Com::tEPRDeltaMaxRadius,"Max printable radius [mm]")
FSTRINGVALUE(Com::tDeltaDiagonalCorrectionA,"Corr. diagonal A [mm]")
FSTRINGVALUE(Com::tDeltaDiagonalCorrectionB,"Corr. diagonal B [mm]")
FSTRINGVALUE(Com::tDeltaDiagonalCorrectionC,"Corr. diagonal C [mm]")
#else
FSTRINGVALUE(Com::tEPRMaxZJerk,"Max. Z-jerk [mm/s]")
FSTRINGVALUE(Com::tEPRXStepsPerMM,"X-axis steps per mm")
FSTRINGVALUE(Com::tEPRYStepsPerMM,"Y-axis steps per mm")
FSTRINGVALUE(Com::tEPRZStepsPerMM,"Z-axis steps per mm")
FSTRINGVALUE(Com::tEPRXMaxFeedrate,"X-axis max. feedrate [mm/s]")
FSTRINGVALUE(Com::tEPRYMaxFeedrate,"Y-axis max. feedrate [mm/s]")
FSTRINGVALUE(Com::tEPRZMaxFeedrate,"Z-axis max. feedrate [mm/s]")
FSTRINGVALUE(Com::tEPRXHomingFeedrate,"X-axis homing feedrate [mm/s]")
FSTRINGVALUE(Com::tEPRYHomingFeedrate,"Y-axis homing feedrate [mm/s]")
FSTRINGVALUE(Com::tEPRZHomingFeedrate,"Z-axis homing feedrate [mm/s]")
FSTRINGVALUE(Com::tEPRXAcceleration,"X-axis acceleration [mm/s^2]")
FSTRINGVALUE(Com::tEPRYAcceleration,"Y-axis acceleration [mm/s^2]")
FSTRINGVALUE(Com::tEPRZAcceleration,"Z-axis acceleration [mm/s^2]")
FSTRINGVALUE(Com::tEPRXTravelAcceleration,"X-axis travel acceleration [mm/s^2]")
FSTRINGVALUE(Com::tEPRYTravelAcceleration,"Y-axis travel acceleration [mm/s^2]")
FSTRINGVALUE(Com::tEPRZTravelAcceleration,"Z-axis travel acceleration [mm/s^2]")
#endif
FSTRINGVALUE(Com::tEPROPSMode,"OPS operation mode [0=Off,1=Classic,2=Fast]")
FSTRINGVALUE(Com::tEPROPSMoveAfter,"OPS move after x% retract [%]")
FSTRINGVALUE(Com::tEPROPSMinDistance,"OPS min. distance for fil. retraction [mm]")
FSTRINGVALUE(Com::tEPROPSRetractionLength,"OPS retraction length [mm]")
FSTRINGVALUE(Com::tEPROPSRetractionBacklash,"OPS retraction backlash [mm]")
FSTRINGVALUE(Com::tEPRBedHeatManager,"Bed Heat Manager [0-3]")
FSTRINGVALUE(Com::tEPRBedPIDDriveMax,"Bed PID drive max")
FSTRINGVALUE(Com::tEPRBedPIDDriveMin,"Bed PID drive min")
FSTRINGVALUE(Com::tEPRBedPGain,"Bed PID P-gain")
FSTRINGVALUE(Com::tEPRBedIGain,"Bed PID I-gain")
FSTRINGVALUE(Com::tEPRBedDGain,"Bed PID D-gain")
FSTRINGVALUE(Com::tEPRBedPISMaxValue,"Bed PID max value [0-255]")
FSTRINGVALUE(Com::tEPRStepsPerMM,"steps per mm")
FSTRINGVALUE(Com::tEPRMaxFeedrate,"max. feedrate [mm/s]")
FSTRINGVALUE(Com::tEPRStartFeedrate,"start feedrate [mm/s]")
FSTRINGVALUE(Com::tEPRAcceleration,"acceleration [mm/s^2]")
FSTRINGVALUE(Com::tEPRHeatManager,"heat manager [0-3]")
FSTRINGVALUE(Com::tEPRDriveMax,"PID drive max")
FSTRINGVALUE(Com::tEPRDriveMin,"PID drive min")
FSTRINGVALUE(Com::tEPRPGain,"PID P-gain/dead-time")
FSTRINGVALUE(Com::tEPRDead,"Heater dead-time")
FSTRINGVALUE(Com::tEPRUnused,"na for dead time ctrl")
FSTRINGVALUE(Com::tEPRIGain,"PID I-gain")
FSTRINGVALUE(Com::tEPRDGain,"PID D-gain")
FSTRINGVALUE(Com::tEPRPIDMaxValue,"PID max value [0-255]")
FSTRINGVALUE(Com::tEPRXOffset,"X-offset [steps]")
FSTRINGVALUE(Com::tEPRYOffset,"Y-offset [steps]")
FSTRINGVALUE(Com::tEPRZOffset,"Z-offset [steps]")
FSTRINGVALUE(Com::tEPRStabilizeTime,"temp. stabilize time [s]")
FSTRINGVALUE(Com::tEPRRetractionWhenHeating,"temp. for retraction when heating [C]")
FSTRINGVALUE(Com::tEPRDistanceRetractHeating,"distance to retract when heating [mm]")
FSTRINGVALUE(Com::tEPRExtruderCoolerSpeed,"extruder cooler speed [0-255]")
FSTRINGVALUE(Com::tEPRAdvanceK,"advance K [0=off]")
FSTRINGVALUE(Com::tEPRAdvanceL,"advance L [0=off]")
#endif
#if SDSUPPORT
2016-01-15 20:42:10 +01:00
//FSTRINGVALUE(Com::tSDRemoved,UI_TEXT_SD_REMOVED)
//FSTRINGVALUE(Com::tSDInserted,UI_TEXT_SD_INSERTED)
FSTRINGVALUE(Com::tSDInitFail,"SD init fail")
FSTRINGVALUE(Com::tErrorWritingToFile,"error writing to file")
FSTRINGVALUE(Com::tBeginFileList,"Begin file list")
FSTRINGVALUE(Com::tEndFileList,"End file list")
FSTRINGVALUE(Com::tFileOpened,"File opened:")
FSTRINGVALUE(Com::tSpaceSizeColon," Size:")
FSTRINGVALUE(Com::tFileSelected,"File selected")
FSTRINGVALUE(Com::tFileOpenFailed,"file.open failed")
FSTRINGVALUE(Com::tSDPrintingByte,"SD printing byte ")
FSTRINGVALUE(Com::tNotSDPrinting,"Not SD printing")
FSTRINGVALUE(Com::tOpenFailedFile,"open failed, File: ")
FSTRINGVALUE(Com::tWritingToFile,"Writing to file: ")
FSTRINGVALUE(Com::tDoneSavingFile,"Done saving file.")
FSTRINGVALUE(Com::tFileDeleted,"File deleted")
FSTRINGVALUE(Com::tDeletionFailed,"Deletion failed")
FSTRINGVALUE(Com::tDirectoryCreated,"Directory created")
FSTRINGVALUE(Com::tCreationFailed,"Creation failed")
FSTRINGVALUE(Com::tSDErrorCode,"SD errorCode:")
#endif // SDSUPPORT
FSTRINGVALUE(Com::tHeaterDecoupled,"Heater decoupled")
FSTRINGVALUE(Com::tHeaterDecoupledWarning,"One heater seems decoupled from thermistor - disabling all for safety!")
#if DISTORTION_CORRECTION
FSTRINGVALUE(Com::tZCorrectionEnabled,"Z correction enabled")
FSTRINGVALUE(Com::tZCorrectionDisabled,"Z correction disabled")
#endif
#if FEATURE_RETRACTION
FSTRINGVALUE(Com::tEPRAutoretractEnabled,"Enable retraction conversion [0/1]")
FSTRINGVALUE(Com::tEPRRetractionLength,"Retraction length [mm]")
FSTRINGVALUE(Com::tEPRRetractionLongLength,"Retraction length extruder switch [mm]")
FSTRINGVALUE(Com::tEPRRetractionSpeed,"Retraction speed [mm/s]")
FSTRINGVALUE(Com::tEPRRetractionZLift,"Retraction z-lift [mm]")
FSTRINGVALUE(Com::tEPRRetractionUndoExtraLength,"Extra extrusion on undo retract [mm]")
FSTRINGVALUE(Com::tEPRRetractionUndoExtraLongLength,"Extra extrusion on undo switch retract [mm]")
FSTRINGVALUE(Com::tEPRRetractionUndoSpeed,"Retraction undo speed")
#endif
FSTRINGVALUE(Com::tConfig,"Config:")
FSTRINGVALUE(Com::tExtrDot,"Extr.")
#if STEPPER_CURRENT_CONTROL == CURRENT_CONTROL_MCP4728
FSTRINGVALUE(Com::tMCPEpromSettings, "MCP4728 DAC EEPROM Settings:")
FSTRINGVALUE(Com::tMCPCurrentSettings,"MCP4728 DAC Current Settings:")
#endif
2016-07-02 18:11:43 +02:00
FSTRINGVALUE(Com::tPrinterModeFFF,"PrinterMode:FFF")
FSTRINGVALUE(Com::tPrinterModeLaser,"PrinterMode:Laser")
FSTRINGVALUE(Com::tPrinterModeCNC,"PrinterMode:CNC")
2016-01-15 20:42:10 +01:00
#ifdef STARTUP_GCODE
FSTRINGVALUE(Com::tStartupGCode,STARTUP_GCODE)
#endif
void Com::config(FSTRINGPARAM(text)) {
printF(tConfig);
printFLN(text);
}
void Com::config(FSTRINGPARAM(text),int value) {
printF(tConfig);
printFLN(text,value);
}
void Com::config(FSTRINGPARAM(text),const char *msg) {
printF(tConfig);
printF(text);
print(msg);
println();
}
void Com::config(FSTRINGPARAM(text),int32_t value){
printF(tConfig);
printFLN(text,value);
}
void Com::config(FSTRINGPARAM(text),uint32_t value){
printF(tConfig);
printFLN(text,value);
}
void Com::config(FSTRINGPARAM(text),float value,uint8_t digits){
printF(tConfig);
printFLN(text,value,digits);
}
void Com::printWarningF(FSTRINGPARAM(text)) {
printF(tWarning);
printF(text);
}
void Com::printWarningFLN(FSTRINGPARAM(text)) {
printF(tWarning);
printFLN(text);
}
void Com::printInfoF(FSTRINGPARAM(text)) {
printF(tInfo);
printF(text);
}
void Com::printInfoFLN(FSTRINGPARAM(text)) {
printF(tInfo);
printFLN(text);
}
void Com::printErrorF(FSTRINGPARAM(text)) {
printF(tError);
printF(text);
}
void Com::printErrorFLN(FSTRINGPARAM(text)) {
printF(tError);
printFLN(text);
}
void Com::printFLN(FSTRINGPARAM(text)) {
printF(text);
println();
}
void Com::printFLN(FSTRINGPARAM(text),const char *msg) {
printF(text);
print(msg);
println();
}
void Com::printF(FSTRINGPARAM(ptr)) {
char c;
while ((c = HAL::readFlashByte(ptr++)) != 0)
HAL::serialWriteByte(c);
}
void Com::printF(FSTRINGPARAM(text),const char *msg) {
printF(text);
print(msg);
}
void Com::printF(FSTRINGPARAM(text),int value) {
printF(text);
print(value);
}
void Com::printF(FSTRINGPARAM(text),int32_t value) {
printF(text);
print(value);
}
void Com::printF(FSTRINGPARAM(text),uint32_t value) {
printF(text);
printNumber(value);
}
void Com::printFLN(FSTRINGPARAM(text),int value) {
printF(text);
print(value);
println();
}
void Com::printFLN(FSTRINGPARAM(text),int32_t value) {
printF(text);
print(value);
println();
}
void Com::printFLN(FSTRINGPARAM(text),uint32_t value) {
printF(text);
printNumber(value);
println();
}
void Com::printFLN(FSTRINGPARAM(text),float value,uint8_t digits) {
printF(text);
printFloat(value,digits);
println();
}
void Com::printF(FSTRINGPARAM(text),float value,uint8_t digits) {
printF(text);
printFloat(value,digits);
}
void Com::print(const char *text) {
while(*text) {
HAL::serialWriteByte(*text++);
}
}
void Com::print(long value) {
if(value<0) {
HAL::serialWriteByte('-');
value = -value;
}
printNumber(value);
}
void Com::printNumber(uint32_t n) {
char buf[11]; // Assumes 8-bit chars plus zero byte.
char *str = &buf[10];
*str = '\0';
do {
unsigned long m = n;
n /= 10;
*--str = '0'+(m - 10 * n);
} while(n);
print(str);
}
void Com::printArrayFLN(FSTRINGPARAM(text),float *arr,uint8_t n,uint8_t digits) {
printF(text);
for(uint8_t i=0; i<n; i++)
printF(Com::tSpace,arr[i],digits);
println();
}
void Com::printArrayFLN(FSTRINGPARAM(text),int32_t *arr,uint8_t n) {
printF(text);
for(uint8_t i=0; i<n; i++)
printF(Com::tSpace,arr[i]);
println();
}
void Com::printFloat(float number, uint8_t digits)
{
if (isnan(number)) {
printF(tNAN);
return;
}
if (isinf(number)) {
printF(tINF);
return;
}
// Handle negative numbers
if (number < 0.0)
{
print('-');
number = -number;
}
// Round correctly so that print(1.999, 2) prints as "2.00"
float rounding = 0.5;
for (uint8_t i=0; i<digits; ++i)
rounding /= 10.0;
number += rounding;
// Extract the integer part of the number and print it
unsigned long int_part = (unsigned long)number;
float remainder = number - (float)int_part;
printNumber(int_part);
// Print the decimal point, but only if there are digits beyond
if (digits > 0)
print('.');
// Extract digits from the remainder one at a time
while (digits-- > 0)
{
remainder *= 10.0;
int toPrint = int(remainder);
print(toPrint);
remainder -= toPrint;
}
}