Added ota hostname

ESP8266-MQTT-BenQ/ESP8266-MQTT-BenQ.h.template

@@ -2,6 +2,9 @@
 const char* ssid = "http://kiel.freifunk.net/";
 const char* password = "";
 
+// OTA Hostname
+const char* ota_hostname = "BenQ";
+
 // MQTT Broker
 const char* mqtt_server = "broker.mqtt-dashboard.com";
 

ESP8266-MQTT-BenQ/ESP8266-MQTT-BenQ.ino

@@ -94,7 +94,7 @@ void setup_wifi() {
     Serial.print("My IP address: ");
     Serial.println(WiFi.localIP());
   }
-  ArduinoOTA.setHostname("esp8266-BenQ");
+  ArduinoOTA.setHostname(ota_hostname);
   ArduinoOTA.begin();  
 }
 

ESP8266-MQTT-MagicBox/.gitignore

@@ -0,0 +1 @@
+ESP8266-MQTT-MagicBox.h

ESP8266-MQTT-MagicBox/ESP8266-MQTT-MagicBox.h.template

@@ -0,0 +1,16 @@
+// WiFi configuration
+const char* ssid = "http://kiel.freifunk.net/";
+const char* password = "";
+
+// OTA Hostname
+const char* ota_hostname = "MagicBox";
+
+// MQTT Broker
+const char* mqtt_server = "broker.mqtt-dashboard.com";
+
+// Device identification
+const char* mqtt_device = "magicBox";
+
+// MQTT topics
+const char* mqtt_topic_port = "magicBox/port";
+const char* mqtt_topic_portState = "magicBox/portState";

ESP8266-MQTT-MagicBox/ESP8266-MQTT-MagicBox.ino

@@ -0,0 +1,252 @@
+/**********************************************************************
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2015 Nis Wechselberg
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ **********************************************************************/
+
+/**********************************************************************
+ * ESP8266-MQTT-MagicBox
+ *
+ * Links the ESP8266 based control board to an mqtt broker.
+ * The program uses multiple topics for incoming and outgoing messages.
+ * Incoming topics:
+ * - <mqtt_device>/port
+ * Outgoing topics:
+ * - <mqtt_device>/portState
+ **********************************************************************/
+
+#include <ESP8266WiFi.h>
+#include <ESP8266mDNS.h>
+#include <WiFiUdp.h>
+#include <ArduinoOTA.h>
+#include <PubSubClient.h>
+#include "ESP8266-MQTT-MagicBox.h"
+
+#define DEBUGTOSERIAL 1
+
+// Timestamp for last publish
+unsigned long lastMsg = 0;
+long publishInterval = 5000;
+// Message buffer
+char msg[50];
+
+// Last known power state
+uint8_t portState = 0;
+uint32_t codes[] = {0xFFAA55, 0xFFA857, 0xFFBA45, 0xFF38C7};
+
+// Pin config
+const uint8_t irSendPin = 12;
+const uint8_t probe1 = 13;
+const uint8_t probe2 = 14;
+const uint8_t probe3 = 16;
+const uint8_t probe4 = 5;
+
+// Global mqtt client object
+WiFiClient espClient;
+PubSubClient client(espClient);
+
+/*
+ * Initial setup for arduino
+ */
+void setup() {
+  
+  // Configure pins
+  pinMode(irSendPin, OUTPUT);
+  digitalWrite(irSendPin, HIGH);
+  
+  // Configure serial port
+  Serial.begin(115200);
+  delay(10);
+
+  // Prepare WiFi connection
+  setup_wifi();
+
+  // Connect to mqtt broker
+  client.setServer(mqtt_server, 1883);
+  client.setCallback(incoming_mqtt);
+}
+
+/*
+ * Prepares the wireless connection
+ */
+void setup_wifi() {
+  // Connect to the WiFi as a client
+  WiFi.mode(WIFI_STA);
+
+  // Do the connection
+  if (DEBUGTOSERIAL) {
+    Serial.println();
+    Serial.print("Connecting to ");
+    Serial.println(ssid);
+  }
+  WiFi.begin(ssid, password);
+  while (WiFi.status() != WL_CONNECTED) {
+    delay(500);
+    if (DEBUGTOSERIAL) {
+      Serial.print(".");
+    }
+  }
+  if (DEBUGTOSERIAL) {
+    Serial.println("");
+    Serial.println("WiFi connected");
+
+    // Print IP address to serial
+    Serial.print("My IP address: ");
+    Serial.println(WiFi.localIP());
+  }
+  ArduinoOTA.setHostname(ota_hostname);
+  ArduinoOTA.begin();
+}
+
+/*
+ * Callback method for incoming mqtt messages
+ */
+void incoming_mqtt(char* topic, byte* payload, unsigned int length) {
+  if (DEBUGTOSERIAL) {
+    Serial.print("Message arrived [");
+    Serial.print(topic);
+    Serial.print("] ");
+    for (unsigned int i = 0; i < length; i++) {
+      Serial.print((char)payload[i]);
+    }
+    Serial.println();
+  }
+
+  if (strcmp(topic, mqtt_topic_port) == 0) {
+    if (length == 1) {
+      if (DEBUGTOSERIAL) {
+        Serial.println("Setting new port active");
+      }
+      uint8_t desiredPortState = 0;
+      char request = (char) payload[0];
+      if (request == '1' || request == '2' || request == '3' || request == '4') {
+        desiredPortState = request - '0';
+      }
+
+      if (desiredPortState != 0 && desiredPortState != portState) {
+        changePort(desiredPortState);
+      }
+    }  
+  }
+}
+
+void changePort(uint8_t newPort) {
+  if (newPort > 0 && newPort < 5) {
+    replicateNEC(irSendPin, codes[newPort - 1], 32);        
+  }
+}
+
+void replicateNEC(int pin, uint32_t data, int dataLength) {
+
+  if (DEBUGTOSERIAL) {
+    Serial.print("Sending code ");
+    Serial.println(data, HEX);
+  }
+  // Prepare mask
+  uint32_t mask = 1L << (dataLength -1);
+  // Write initial 9ms+4.5ms pulse
+  digitalWrite(pin, LOW);
+  delayMicroseconds(9000);
+  digitalWrite(pin, HIGH);
+  delayMicroseconds(4500);
+
+  // Write pulses from data
+  while (mask > 0) {
+    digitalWrite(pin, LOW);
+    delayMicroseconds(562);
+    digitalWrite(pin, HIGH);
+    delayMicroseconds(562);
+    if (data & mask) {
+      delayMicroseconds(1124);
+    }
+    mask = mask >> 1;
+  }
+
+  // Write trailing pulse
+  digitalWrite(pin, LOW);
+  delayMicroseconds(562);
+  digitalWrite(pin, HIGH);
+}
+
+/*
+ * Blocking reconnect to the mqtt broker
+ */
+void reconnect() {
+  // Loop until we're reconnected
+  while (!client.connected()) {
+    if (DEBUGTOSERIAL) {
+      Serial.print("Attempting MQTT connection...");
+    }
+    // Attempt to connect
+    if (client.connect(mqtt_device)) {
+      if (DEBUGTOSERIAL) {
+        Serial.println("connected");
+      }
+      // subscribe to incoming topics
+      client.subscribe(mqtt_topic_port);
+    } else {
+      if (DEBUGTOSERIAL) {
+        Serial.print("failed, rc=");
+        Serial.print(client.state());
+        Serial.println(" try again in 5 seconds");
+      }
+      // Wait 5 seconds before retrying
+      delay(5000);
+    }
+  }
+}
+
+void updatePortState() {
+  // Read value from digital pin (Levels are inverted)
+  if (digitalRead(probe1)) portState = 1;
+  if (digitalRead(probe2)) portState = 2;
+  if (digitalRead(probe3)) portState = 3;
+  if (digitalRead(probe4)) portState = 4;
+  
+  if (DEBUGTOSERIAL) {
+    Serial.print("Output port ");
+    Serial.print(portState);
+    Serial.println(" selected");
+  }
+  
+  snprintf(msg, 49, "%d", portState);
+  client.publish(mqtt_topic_portState, msg);
+}
+
+void loop() {
+  // Check OTA update
+  ArduinoOTA.handle();
+  
+  // Ensure MQTT connection
+  if (!client.connected()) {
+    reconnect();
+  }
+
+  // Check the inbox
+  client.loop();
+
+  // Maybe push the current status
+  long now = millis();
+  if (now - lastMsg > publishInterval) {
+    lastMsg = now;
+    updatePortState();
+  }
+}

ESP8266-MQTT-RGBControl/ESP8266-MQTT-RGBControl.h.template

@@ -2,14 +2,21 @@
 const char* ssid = "http://kiel.freifunk.net/";
 const char* password = "";
 
+// OTA Hostname
+const char* ota_hostname = "RGBControl";
+
 // MQTT Broker
 const char* mqtt_server = "broker.mqtt-dashboard.com";
 
 // Device identification
-const char* mqtt_device = "esp8266client"
+const char* mqtt_device = "esp8266RGBControl"
 
 // MQTT topics
-const char* mqtt_topic_power = "esp8266client/power";
+const char* mqtt_topic_power = "RGBControl/power";
-const char* mqtt_topic_color = "esp8266client/color";
+const char* mqtt_topic_powerState = "RGBControl/powerState";
-const char* mqtt_topic_breathe = "esp8266client/breathe";
+const char* mqtt_topic_color = "RGBControl/color";
-const char* mqtt_topic_cycle = "esp8266client/cycle";
+const char* mqtt_topic_colorState = "RGBControl/colorState";
+const char* mqtt_topic_breathe = "RGBControl/breathe";
+const char* mqtt_topic_breatheState = "RGBControl/breatheState";
+const char* mqtt_topic_cycle = "RGBControl/cycle";
+const char* mqtt_topic_cycleState = "RGBControl/cycleState";

ESP8266-MQTT-RGBControl/ESP8266-MQTT-RGBControl.ino

@@ -78,6 +78,13 @@ unsigned char decColor = 0;
 
 // Timestamp for last color update
 unsigned long lastColorUpdate = 0;
+
+// Timestamp for last publish
+unsigned long lastMsg = 0;
+unsigned long publishInterval = 5000;
+// Message buffer
+char msg[50];
+
 /*
  * Initial setup for arduino
  */
@@ -117,7 +124,7 @@ void setup_wifi() {
   Serial.print("My IP address: ");
   Serial.println(WiFi.localIP());
 
-  ArduinoOTA.setHostname("esp8266-Lighting2");
+  ArduinoOTA.setHostname(ota_hostname);
   ArduinoOTA.begin();
 }
 
@@ -293,6 +300,20 @@ void setColor() {
   }
 }
 
+void publishState() {
+  snprintf(msg, 49, "%d", powerFactor);
+  client.publish(mqtt_topic_powerState, msg);
+
+  snprintf(msg, 49, "#%02X%02X%02X", rgbColor[0], rgbColor[1], rgbColor[2]);
+  client.publish(mqtt_topic_colorState, msg);
+  
+  snprintf(msg, 49, "%d", doBreathe);
+  client.publish(mqtt_topic_breatheState, msg);
+  
+  snprintf(msg, 49, "%d", doColorCycle);
+  client.publish(mqtt_topic_cycleState, msg);
+}
+
 void loop() {
   // Check OTA update
   ArduinoOTA.handle();
@@ -302,11 +323,16 @@ void loop() {
   }
   client.loop();
 
+  unsigned long now = millis();
   if (isPowerSet & isColorSet & isCycleSet & isBreatheSet) {
-    unsigned long now = millis();
     if (now - lastColorUpdate > 30) {
       lastColorUpdate = now;
       updateLight();
     }
   }
+
+  if (now - lastMsg > publishInterval) {
+    lastMsg = now;
+    publishState();
+  }
 }

ESP8266-MQTT-Teufel-DS5/ESP8266-MQTT-Teufel-DS5.h.template

@@ -2,12 +2,17 @@
 const char* ssid = "http://kiel.freifunk.net/";
 const char* password = "";
 
+// OTA Hostname
+const char* ota_hostname = "TeufelDS5";
+
 // MQTT Broker
 const char* mqtt_server = "broker.mqtt-dashboard.com";
 
 // Device identification
-const char* mqtt_device = "esp8266benq"
+const char* mqtt_device = "esp8266TeufelDS5"
 
 // MQTT topics
-const char* mqtt_topic_power = "benq/power";
+const char* mqtt_topic_command = "teufelds5/command";
-const char* mqtt_topic_lamptime = "benq/lamptime";
+const char* mqtt_topic_volume = "teufelds5/volume";
+const char* mqtt_topic_powerState = "teufelds5/powerState";
+const char* mqtt_topic_volumeState = "teufelds5/volumeState";

ESP8266-MQTT-Teufel-DS5/ESP8266-MQTT-Teufel-DS5.ino

@@ -138,7 +138,7 @@ void setup_wifi() {
     Serial.print("My IP address: ");
     Serial.println(WiFi.localIP());
   }
-  ArduinoOTA.setHostname("esp8266-TeufelDS5");
+  ArduinoOTA.setHostname(ota_hostname);
   ArduinoOTA.begin();
 }
 

ESP8266-MQTT-Teufel-Subwoofer/ESP8266-MQTT-Teufel-Subwoofer.h.template

@@ -2,12 +2,15 @@
 const char* ssid = "http://kiel.freifunk.net/";
 const char* password = "";
 
+// OTA Hostname
+const char* ota_hostname = "TeufelSub";
+
 // MQTT Broker
 const char* mqtt_server = "broker.mqtt-dashboard.com";
 
 // Device identification
-const char* mqtt_device = "livingroom/teufelSub";
+const char* mqtt_device = "teufelSub";
 
 // MQTT topics
-const char* mqtt_topic_power = "livingroom/teufelSub/power";
+const char* mqtt_topic_power = "teufelSub/power";
-const char* mqtt_topic_powerState = "livingroom/teufelSub/powerState";
+const char* mqtt_topic_powerState = "teufelSub/powerState";

ESP8266-MQTT-Teufel-Subwoofer/ESP8266-MQTT-Teufel-Subwoofer.ino

@@ -108,7 +108,7 @@ void setup_wifi() {
     Serial.print("My IP address: ");
     Serial.println(WiFi.localIP());
   }
-  ArduinoOTA.setHostname("esp8266-TeufelSub");
+  ArduinoOTA.setHostname(ota_hostname);
   ArduinoOTA.begin();
 }