Working version of mqtt based rgb strip control

ESP8266-RGB-MQTT/ESP8266-RGB-MQTT.ino

@@ -45,12 +45,36 @@ WiFiClient espClient;
 PubSubClient client(espClient);
 
 // RGB strip pin configuration
-const short redPin = 14;
+const unsigned char pin[3] = {14,16,12};
-const short greenPin = 16;
-const short bluePin = 12;
 
+// Color values for the pwm outputs
+unsigned char rgbColor[3];
 
+// Scaling factors for color calibration
+const float calibration[3] = {1.0, 1.0, 0.7};
 
+// Flagss to determine if all necessary information
+// has been gathered from mqtt broker
+unsigned char isColorSet = 0;
+unsigned char isCycleSet = 0;
+unsigned char isBreatheSet = 0;
+unsigned char isPowerSet = 0;
+
+// Scaling factors for different color adjustments
+unsigned char powerFactor = 0;
+unsigned char doColorCycle = 0;
+unsigned char doBreathe = 0;
+float breathScale = 0.999;
+float breathAdjustment = -0.001;
+
+// Global scaling for pwm, due to pwm scale 0..1023
+const float globalScale = 3.0;
+
+// Pointer to the current decreasing color
+unsigned char decColor = 0;
+
+// Timestamp for last color update
+unsigned long lastColorUpdate = 0;
 /*
  * Initial setup for arduino
  */
@@ -104,18 +128,93 @@ void incoming_mqtt(char* topic, byte* payload, unsigned int length) {
   Serial.println();
 
   if (strcmp(topic, mqtt_topic_power) == 0) {
-
+    isPowerSet = 1;
+    if (length == 1) {
+      Serial.println("Setting power factor");
+      if ((char)payload[0] == '1') {
+        powerFactor = 1;
+      } else {
+        powerFactor = 0;
+      }
+    }
   }
   if (strcmp(topic, mqtt_topic_color) == 0) {
+    isColorSet = 1;
+    if (length == 7 && (char)payload[0] == '#') {
+      Serial.println("Setting color");
+      // Parse hex input to color values
+      unsigned char i = 0;
+      unsigned char colorValue;
+      while (i < 6) {
+        // Reset parsing container at start of color
+        if (i % 2 == 0) {
+          colorValue = 0;
+        }
+        // Grab current char
+        char data = (char) payload[i+1];
+        char value = 0;
+        if (data >= '0' && data <= '9') {
+          value = data - '0';
+        }
+        if (data >= 'A' && data <= 'F') {
+          value = data - 'A';
+          value += 10;
+        }
+        if (data >= 'a' && data <= 'f') {
+          value = data;
+          value += 10;
+        }
 
+        if (i % 2 ==  0) {
+          // First hex digit, shift value to the left
+          value = value << 4;
+        }
+        // Add parsed value to accumulator
+        colorValue += value;
+
+        if (i % 2 == 1) {
+          // Write colorValue to rgbValue
+          rgbColor[i/2] = colorValue;
+        }
+        i += 1;
+      }
+    }
   }
   if (strcmp(topic, mqtt_topic_cycle) == 0) {
-
+    isCycleSet = 1;
+    if (length ==  1) {
+      Serial.println("Setting color cycling");
+      if ((char)payload[0] == '1') {
+        if (!doColorCycle) {
+          doColorCycle = 1;
+          // Reset decreasing color
+          decColor = 0;
+        }
+      } else {
+        if (doColorCycle) {
+          doColorCycle = 0;
+        }
+      }
+    }
   }
   if (strcmp(topic, mqtt_topic_breathe) == 0) {
-
+    isBreatheSet = 1;
+    if (length == 1) {
+      Serial.println("Setting color breathing");
+      if ((char)payload[0] == '1') {
+        if (!doBreathe) {
+          doBreathe = 1;
+          breathScale = 0.999;
+          breathAdjustment = -0.001;
+        }
+      } else {
+        if (doBreathe) {
+          doBreathe = 0;
+          breathScale = 1.0;
+        }
+      }
+    }
   }
-
 }
 
 /*
@@ -145,8 +244,47 @@ void reconnect() {
   }
 }
 
-void updateColor() {
+void updateLight() {
+  if (doColorCycle) {
+    updateColorCycling();
+  }
+  if (doBreathe) {
+    updateBreathing();
+  }
+  setColor();
+}
 
+void updateColorCycling() {
+  if (rgbColor[0] == 0 && rgbColor[1] == 0 && rgbColor[2] == 0) {
+    rgbColor[0] = 255;
+    decColor = 0;
+  }
+
+  unsigned char incColor = (decColor + 1) % 3;
+  if (rgbColor[decColor] > 0) {
+    rgbColor[decColor] -= 1;
+  }
+  if (rgbColor[incColor] < 255) {
+    rgbColor[incColor] += 1;
+  }
+
+  if (rgbColor[incColor] == 255 && rgbColor[decColor] == 0) {
+    decColor = incColor;
+  }
+}
+
+void updateBreathing() {
+  breathScale += breathAdjustment;
+
+  if (breathScale <= 0.001 || breathScale >= 0.999) {
+    breathAdjustment = 0 - breathAdjustment;
+  }
+}
+
+void setColor() {
+  for (int i = 0; i < 3; ++i) {
+    analogWrite(pin[i], rgbColor[i] * powerFactor * globalScale * breathScale * calibration[i]);
+  }
 }
 
 void loop() {
@@ -155,5 +293,11 @@ void loop() {
   }
   client.loop();
 
-  updateColor();
+  if (isPowerSet & isColorSet & isCycleSet & isBreatheSet) {
+    unsigned long now = millis();
+    if (now - lastColorUpdate > 30) {
+      lastColorUpdate = now;
+      updateLight();
+    }
+  }
 }