Arduino/Repetier/uilang.h
2016-07-02 18:11:43 +02:00

3893 lines
191 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
This file is part of Repetier-Firmware.
Repetier-Firmware is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Repetier-Firmware is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Repetier-Firmware. If not, see <http://www.gnu.org/licenses/>.
*/
#if !defined(UI_DISPLAY_CHARSET) || UI_DISPLAY_CHARSET > 3
#define UI_DISPLAY_CHARSET 1
#endif
//Symbolic character values for specific symbols.
//May be overridden for different controllers, charactersets, etc.
#define cUP "\001"
#define cDEG "\002"
#define cSEL "\003"
#define cUNSEL "\004"
#define cTEMP "\005"
#define cFOLD "\006"
#define bFOLD 6
#define cARROW "\176"
#if UI_DISPLAY_CHARSET == 0 // ASCII fallback
#define CHAR_RIGHT '-'
#define CHAR_SELECTOR '>'
#define CHAR_SELECTED '*'
#define STR_auml "ae"
#define STR_Auml "Ae"
#define STR_uuml "ue"
#define STR_Uuml "Ue"
#define STR_ouml "oe"
#define STR_Ouml "Oe"
#define STR_szlig "ss"
#endif
#if UI_DISPLAY_CHARSET == 1 // HD44870 charset with knji chars
#define CHAR_RIGHT 0x7e
#define CHAR_SELECTOR '>'
#define CHAR_SELECTED '*'
#define STR_auml "\xe1"
#define STR_Auml "Ae"
#define STR_uuml "\365"
#define STR_Uuml "Ue"
#define STR_ouml "\357"
#define STR_Ouml "Oe"
#define STR_szlig "\342"
#endif
#if UI_DISPLAY_CHARSET == 2 // Western charset
#define CHAR_RIGHT 0xbc
#define CHAR_SELECTOR 0xf6
#define CHAR_SELECTED '*'
#define STR_auml "\204"
#define STR_Auml "\216"
#define STR_uuml "\201"
#define STR_Uuml "\212"
#define STR_ouml "\204"
#define STR_Ouml "\211"
#define STR_szlig "160"
#endif
#if UI_DISPLAY_CHARSET==3 // U8glib
#define CHAR_RIGHT 187 //>>
#define CHAR_SELECTOR 255 //'>'
#define CHAR_SELECTED 254 //'*'
#define STR_auml "\344"
#define STR_Auml "\304"
#define STR_uuml "\374"
#define STR_Uuml "\334"
#define STR_ouml "\366"
#define STR_Ouml "\326"
#define STR_szlig "\337"
#endif
#define LANGUAGE_EN_ID 0
#define LANGUAGE_DE_ID 1
#define LANGUAGE_NL_ID 2
#define LANGUAGE_PT_ID 3
#define LANGAUGE_IT_ID 4
#define LANGUAGE_ES_ID 5
#define LANGUAGE_SE_ID 6
#define LANGUAGE_FR_ID 7
#define LANGUAGE_CZ_ID 8
#define LANGUAGE_PL_ID 9
#define LANGUAGE_TR_ID 10
#define LANGUAGE_FI_ID 11
#define NUM_LANGUAGES_KNOWN 12
#define NUM_TRANSLATED_WORDS 267
// For selectable translations we refer to each text by a id which gets
// defined here. The list starts at 0 and defines the position in the
// translation index.
#define UI_TEXT_ON_ID 0 // "On"
#define UI_TEXT_OFF_ID 1 // "Off"
#define UI_TEXT_NA_ID 2 // "N/A" // Output for not available
#define UI_TEXT_YES_ID 3 // "Yes"
#define UI_TEXT_NO_ID 4 // "No"
#define UI_TEXT_PRINT_POS_ID 5 // "Printing..."
#define UI_TEXT_PRINTING_ID 6 // "Printing"
#define UI_TEXT_IDLE_ID 7 // "Idle"
#define UI_TEXT_NOSDCARD_ID 8 // "No SD Card"
#define UI_TEXT_ERROR_ID 9 // "**** ERROR ****"
#define UI_TEXT_BACK_ID 10 // "Back " cUP
#define UI_TEXT_QUICK_SETTINGS_ID 11 // "Quick Settings"
#define UI_TEXT_ERRORMSG_ID 12 // "%oe"
#define UI_TEXT_CONFIGURATION_ID 13 // "Configuration"
#define UI_TEXT_POSITION_ID 14 // "Position"
#define UI_TEXT_EXTRUDER_ID 15 // "Extruder"
#define UI_TEXT_SD_CARD_ID 16 // "SD Card"
#define UI_TEXT_DEBUGGING_ID 17 // "Debugging"
#define UI_TEXT_HOME_DELTA_ID 18 // "Home Delta"
#define UI_TEXT_HOME_ALL_ID 19 // "Home All"
#define UI_TEXT_HOME_X_ID 20 // "Home X"
#define UI_TEXT_HOME_Y_ID 21 // "Home Y"
#define UI_TEXT_HOME_Z_ID 22 // "Home Z"
#define UI_TEXT_PREHEAT_PLA_ID 23 // "Preheat PLA"
#define UI_TEXT_PREHEAT_ABS_ID 24 // "Preheat ABS"
#define UI_TEXT_LIGHTS_ONOFF_ID 25 // "Lights :%lo"
#define UI_TEXT_COOLDOWN_ID 26 // "Cooldown"
#define UI_TEXT_SET_TO_ORIGIN_ID 27 // "Set to Origin"
#define UI_TEXT_DISABLE_STEPPER_ID 28 // "Disable stepper"
#define UI_TEXT_X_POSITION_ID 29 // "X Position"
#define UI_TEXT_X_POS_FAST_ID 30 // "X Pos. Fast"
#define UI_TEXT_Y_POSITION_ID 31 // "Y Position"
#define UI_TEXT_Y_POS_FAST_ID 32 // "Y Pos. Fast"
#define UI_TEXT_Z_POSITION_ID 33 // "Z Position"
#define UI_TEXT_Z_POS_FAST_ID 34 // "Z Pos. Fast"
#define UI_TEXT_E_POSITION_ID 35 // "Extr. position"
#define UI_TEXT_BED_TEMP_ID 36 // "Bed Temp: %Eb" cDEG "C"
#define UI_TEXT_EXTR0_TEMP_ID 37 // "Temp. 1 : %E0" cDEG "C"
#define UI_TEXT_EXTR1_TEMP_ID 38 // "Temp. 2 : %E1" cDEG "C"
#define UI_TEXT_EXTR2_TEMP_ID 39 // "Temp. 3 : %E2" cDEG "C"
#define UI_TEXT_EXTR0_OFF_ID 40 // "Turn Extr. 1 Off"
#define UI_TEXT_EXTR1_OFF_ID 41 // "Turn Extr. 2 Off"
#define UI_TEXT_EXTR2_OFF_ID 42 // "Turn Extr. 3 Off"
#define UI_TEXT_EXTR0_SELECT_ID 43 // "%X0 Select Extr. 1"
#define UI_TEXT_EXTR1_SELECT_ID 44 // "%X1 Select Extr. 2"
#define UI_TEXT_EXTR2_SELECT_ID 45 // "%X2 Select Extr. 3"
#define UI_TEXT_EXTR_ORIGIN_ID 46 // "Set Origin"
#define UI_TEXT_PRINT_X_ID 47 // "Print X:%ax"
#define UI_TEXT_PRINT_Y_ID 48 // "Print Y:%ay"
#define UI_TEXT_PRINT_Z_ID 49 // "Print Z:%az"
#define UI_TEXT_PRINT_Z_DELTA_ID 50 // "Print:%az"
#define UI_TEXT_MOVE_X_ID 51 // "Move X :%aX"
#define UI_TEXT_MOVE_Y_ID 52 // "Move Y :%aY"
#define UI_TEXT_MOVE_Z_ID 53 // "Move Z :%aZ"
#define UI_TEXT_MOVE_Z_DELTA_ID 54 // "Move:%aZ"
#define UI_TEXT_JERK_ID 55 // "Jerk :%aj"
#define UI_TEXT_ZJERK_ID 56 // "Z-Jerk :%aJ"
#define UI_TEXT_ACCELERATION_ID 57 // "Acceleration"
#define UI_TEXT_STORE_TO_EEPROM_ID 58 // "Store to EEPROM"
#define UI_TEXT_LOAD_EEPROM_ID 59 // "Load f. EEPROM"
#define UI_TEXT_DBG_ECHO_ID 60 // "Echo :%do"
#define UI_TEXT_DBG_INFO_ID 61 // "Info :%di"
#define UI_TEXT_DBG_ERROR_ID 62 // "Errors :%de"
#define UI_TEXT_DBG_DRYRUN_ID 63 // "Dry run:%dd"
#define UI_TEXT_OPS_OFF_ID 64 // "%O0 OPS Off"
#define UI_TEXT_OPS_CLASSIC_ID 65 // "%O1 OPS Classic"
#define UI_TEXT_OPS_FAST_ID 66 // "%O2 OPS Fast"
#define UI_TEXT_OPS_RETRACT_ID 67 // "Retract :%Or"
#define UI_TEXT_OPS_BACKSLASH_ID 68 // "Backsl. :%Ob"
#define UI_TEXT_OPS_MINDIST_ID 69 // "Min.dist :%Od"
#define UI_TEXT_OPS_MOVE_AFTER_ID 70 // "Move after:%Oa"
#define UI_TEXT_ANTI_OOZE_ID 71 // "Anti Ooze"
#define UI_TEXT_PRINT_FILE_ID 72 // "Print file"
#define UI_TEXT_PAUSE_PRINT_ID 73 // "Pause Print"
#define UI_TEXT_CONTINUE_PRINT_ID 74 // "Continue Print"
#define UI_TEXT_UNMOUNT_CARD_ID 75 // "Unmount Card"
#define UI_TEXT_MOUNT_CARD_ID 76 // "Mount Card"
#define UI_TEXT_DELETE_FILE_ID 77 // "Delete file"
#define UI_TEXT_FEEDRATE_ID 78 // "Feedrate"
#define UI_TEXT_FEED_MAX_X_ID 79 // "Max X:%fx"
#define UI_TEXT_FEED_MAX_Y_ID 80 // "Max Y:%fy"
#define UI_TEXT_FEED_MAX_Z_ID 81 // "Max Z:%fz"
#define UI_TEXT_FEED_MAX_Z_DELTA_ID 82 // "Max:%fz"
#define UI_TEXT_FEED_HOME_X_ID 83 // "Home X:%fX"
#define UI_TEXT_FEED_HOME_Y_ID 84 // "Home Y:%fY"
#define UI_TEXT_FEED_HOME_Z_ID 85 // "Home Z:%fZ"
#define UI_TEXT_FEED_HOME_Z_DELTA_ID 86 // "Home:%fZ"
#define UI_TEXT_ACTION_XPOSITION4A_ID 87 // "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION4B_ID 88 // "Min endstop:%sx"
#define UI_TEXT_ACTION_XPOSITION4C_ID 89 // "Max endstop:%sX"
#define UI_TEXT_ACTION_XPOSITION4D_ID 90 // ""
#define UI_TEXT_ACTION_YPOSITION4A_ID 91 // "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION4B_ID 92 // "Min endstop:%sy"
#define UI_TEXT_ACTION_YPOSITION4C_ID 93 // "Max endstop:%sY"
#define UI_TEXT_ACTION_YPOSITION4D_ID 94 // ""
#define UI_TEXT_ACTION_ZPOSITION4A_ID 95 // "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION4B_ID 96 // "Min endstop:%sz"
#define UI_TEXT_ACTION_ZPOSITION4C_ID 97 // "Max endstop:%sZ"
#define UI_TEXT_ACTION_ZPOSITION4D_ID 98 // ""
#define UI_TEXT_ACTION_XPOSITION_FAST4A_ID 99 // "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST4B_ID 100 // "Min endstop:%sx"
#define UI_TEXT_ACTION_XPOSITION_FAST4C_ID 101 // "Max endstop:%sX"
#define UI_TEXT_ACTION_XPOSITION_FAST4D_ID 102 // ""
#define UI_TEXT_ACTION_YPOSITION_FAST4A_ID 103 // "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST4B_ID 104 // "Min endstop:%sy"
#define UI_TEXT_ACTION_YPOSITION_FAST4C_ID 105 // "Max endstop:%sY"
#define UI_TEXT_ACTION_YPOSITION_FAST4D_ID 106 // ""
#define UI_TEXT_ACTION_ZPOSITION_FAST4A_ID 107 // "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST4B_ID 108 // "Min endstop:%sz"
#define UI_TEXT_ACTION_ZPOSITION_FAST4C_ID 109 // "Max endstop:%sZ"
#define UI_TEXT_ACTION_ZPOSITION_FAST4D_ID 110 // ""
#define UI_TEXT_ACTION_EPOSITION_FAST2A_ID 111 // "E:%x3 mm"
#define UI_TEXT_ACTION_EPOSITION_FAST2B_ID 112 // "1 click = 1 mm"
#define UI_TEXT_ACTION_XPOSITION2A_ID 113 // "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION2B_ID 114 // "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION2A_ID 115 // "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION2B_ID 116 // "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION2A_ID 117 // "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION2B_ID 118 // "Min:%sz Max:%sZ"
#define UI_TEXT_ACTION_XPOSITION_FAST2A_ID 119 // "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST2B_ID 120 // "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION_FAST2A_ID 121 // "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST2B_ID 122 // "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION_FAST2A_ID 123 // "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST2B_ID 124 // "Min:%sz Max:%sZ"
#define UI_TEXT_FANSPEED_ID 125 // "Fan speed"
#define UI_TEXT_ACTION_FANSPEED_ID 126 // "Fan speed:%Fs%%%"
#define UI_TEXT_FAN_OFF_ID 127 // "Turn Fan Off"
#define UI_TEXT_FAN_25_ID 128 // "Set Fan 25%%%"
#define UI_TEXT_FAN_50_ID 129 // "Set Fan 50%%%"
#define UI_TEXT_FAN_75_ID 130 // "Set Fan 75%%%"
#define UI_TEXT_FAN_FULL_ID 131 // "Set Fan Full"
#define UI_TEXT_STEPPER_INACTIVE_ID 132 // "Stepper Inactive"
#define UI_TEXT_STEPPER_INACTIVE2A_ID 133 // "Dis. After: %is"
#define UI_TEXT_STEPPER_INACTIVE2B_ID 134 // "[min] 0=Off"
#define UI_TEXT_POWER_INACTIVE_ID 135 // "Max. Inactive"
#define UI_TEXT_POWER_INACTIVE2A_ID 136 // "Dis. After: %ip"
#define UI_TEXT_POWER_INACTIVE2B_ID 137 // "[min] 0=Off"
#define UI_TEXT_GENERAL_ID 138 // "General"
#define UI_TEXT_BAUDRATE_ID 139 // "Baudrate:%oc"
#define UI_TEXT_EXTR_STEPS_ID 140 // "Steps/MM:%Se"
#define UI_TEXT_EXTR_START_FEED_ID 141 // "Start FR:%Xf"
#define UI_TEXT_EXTR_MAX_FEED_ID 142 // "Max FR:%XF"
#define UI_TEXT_EXTR_ACCEL_ID 143 // "Accel:%XA"
#define UI_TEXT_EXTR_WATCH_ID 144 // "Stab.Time:%Xw"
#define UI_TEXT_EXTR_ADVANCE_L_ID 145 // "Advance lin:%Xl"
#define UI_TEXT_EXTR_ADVANCE_K_ID 146 // "Advance quad:%Xa"
#define UI_TEXT_EXTR_MANAGER_ID 147 // "Control:%Xh"
#define UI_TEXT_EXTR_PGAIN_ID 148 // "PID P:%Xp"
#define UI_TEXT_EXTR_DEADTIME_ID 149 // "Deadtime:%Xp"
#define UI_TEXT_EXTR_DMAX_DT_ID 150 // "Control PWM:%XM"
#define UI_TEXT_EXTR_IGAIN_ID 151 // "PID I:%Xi"
#define UI_TEXT_EXTR_DGAIN_ID 152 // "PID D:%Xd"
#define UI_TEXT_EXTR_DMIN_ID 153 // "Drive Min:%Xm"
#define UI_TEXT_EXTR_DMAX_ID 154 // "Drive Max:%XM"
#define UI_TEXT_EXTR_PMAX_ID 155 // "PID Max:%XD"
#define UI_TEXT_EXTR_XOFF_ID 156 // "X-Offset:%Xx"
#define UI_TEXT_EXTR_YOFF_ID 157 // "Y-Offset:%Xy"
#define UI_TEXT_STRING_HM_BANGBANG_ID 158 // "BangBang"
#define UI_TEXT_STRING_HM_PID_ID 159 // "PID"
#define UI_TEXT_STRING_ACTION_ID 160 // "Action:%la"
#define UI_TEXT_HEATING_EXTRUDER_ID 161// "Heating Extruder"
#define UI_TEXT_HEATING_BED_ID 162 // "Heating Bed"
#define UI_TEXT_KILLED_ID 163 // "Killed"
#define UI_TEXT_STEPPER_DISABLED_ID 164 // "Stepper Disabled"
#define UI_TEXT_EEPROM_STOREDA_ID 165 // "Configuration"
#define UI_TEXT_EEPROM_STOREDB_ID 166 // "stored in EEPROM"
#define UI_TEXT_EEPROM_LOADEDA_ID 167 // "Configuration"
#define UI_TEXT_EEPROM_LOADEDB_ID 168 // "loaded f. EEPROM"
#define UI_TEXT_UPLOADING_ID 169 // "Uploading..."
#define UI_TEXT_PAGE_BUFFER_ID 170 // "Buffer:%oB"
#define UI_TEXT_PAGE_EXTRUDER_ID 171 // " E:%ec/%Ec" cDEG "C" cARROW "%oC"
#define UI_TEXT_PAGE_EXTRUDER1_ID 172 // "E1:%e0/%E0" cDEG "C" cARROW "%o0"
#define UI_TEXT_PAGE_EXTRUDER2_ID 173 // "E2:%e1/%E1" cDEG "C" cARROW "%o1"
#define UI_TEXT_PAGE_EXTRUDER3_ID 174 // "E3:%e2/%E2" cDEG "C" cARROW "%o2"
#define UI_TEXT_PAGE_BED_ID 175 // " B:%eb/%Eb" cDEG "C" cARROW "%ob"
#define UI_TEXT_SPEED_MULTIPLY_ID 176 // "Speed Mul.:%om%%%"
#define UI_TEXT_FLOW_MULTIPLY_ID 177 // "Flow Mul. :%of%%%"
#define UI_TEXT_SHOW_MEASUREMENT_ID 178 // "Show meas."
#define UI_TEXT_RESET_MEASUREMENT_ID 179 // "Reset meas."
#define UI_TEXT_SET_MEASURED_ORIGIN_ID 180 // "Set Z=0"
#define UI_TEXT_ZCALIB_ID 181 // "Z Calib."
#define UI_TEXT_SET_P1_ID 182 // "Set P1"
#define UI_TEXT_SET_P2_ID 183 // "Set P2"
#define UI_TEXT_SET_P3_ID 184 // "Set P3"
#define UI_TEXT_CALCULATE_LEVELING_ID 185 // "Calculate Leveling"
#define UI_TEXT_LEVEL_ID 186 // "Level delta"
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP_ID 187 // "Wait Temp. %XT" cDEG "C"
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS_ID 188 // "Wait Units: %XU mm"
#define UI_TEXT_SD_REMOVED_ID 189 // "SD Card removed"
#define UI_TEXT_SD_INSERTED_ID 190 // "SD Card inserted"
#define UI_TEXT_PRINTER_READY_ID 191 // "Printer ready."
// Printtime output gets aggregated like <Days_5gisgits>UI_TEXT_PRINTTIME_DAYS<Hours>UI_TEXT_PRINTTIME_HOURS<Minutes>UI_TEXT_PRINTTIME_MINUTES
// ___88 days 12:45
#define UI_TEXT_PRINTTIME_DAYS_ID 192 // " days "
#define UI_TEXT_PRINTTIME_HOURS_ID 193 // ":"
#define UI_TEXT_PRINTTIME_MINUTES_ID 194 // ""
#define UI_TEXT_PRINT_TIME_ID 195 // "Printing time"
#define UI_TEXT_PRINT_FILAMENT_ID 196 // "Filament printed"
#define UI_TEXT_PRINTED_ID 197 // "printed"
#define UI_TEXT_POWER_ID 198 // "ATX power on/off"
#define UI_TEXT_STRING_HM_DEADTIME_ID 199 // "Dead Time"
#define UI_TEXT_STRING_HM_SLOWBANG_ID 200 // "SlowBang"
#define UI_TEXT_STOP_PRINT_ID 201 // "Stop Print"
#define UI_TEXT_Z_BABYSTEPPING_ID 202 // "Z Babystep.:%oYmm"
#define UI_TEXT_CHANGE_FILAMENT_ID 203 // "Change filament"
#define UI_TEXT_WIZ_CH_FILAMENT1_ID 204 // "Change filament"
#define UI_TEXT_WIZ_CH_FILAMENT2_ID 205 // "Rotate to move"
#define UI_TEXT_WIZ_CH_FILAMENT3_ID 206 // "filament up/down"
#define UI_TEXT_CLICK_DONE_ID 207 // "Click when done"
#define UI_TEXT_AUTOLEVEL_ONOFF_ID 208 // "Autolevel: %ll"
#define UI_TEXT_SERVOPOS_ID 209 // "Servo pos.: %oS"
#define UI_TEXT_IGNORE_M106_ID 210 // "Ignore M106 cmd %Fi"
#define UI_TEXT_WIZ_REHEAT1_ID 211 // "Click to reheat"
#define UI_TEXT_WIZ_REHEAT2_ID 212 // "extruders."
#define UI_TEXT_WIZ_WAITTEMP1_ID 213 // "Wait for target"
#define UI_TEXT_WIZ_WAITTEMP2_ID 214 // "temperatures ..."
#define UI_TEXT_EXTRUDER_JAM_ID 215 // "Extruder Jam"
#define UI_TEXT_STANDBY_ID 216 // "Standby"
#define UI_TEXT_BED_COATING_ID 217 // "Bed Coating"
#define UI_TEXT_BED_COATING_SET1_ID 218 // "Bed coating set to",""
#define UI_TEXT_BED_COATING_SET2_ID 219 // "Bed coating set to",""
#define UI_TEXT_NOCOATING_ID 220 // "No Coating"
#define UI_TEXT_BUILDTAK_ID 221 // "BuildTak"
#define UI_TEXT_KAPTON_ID 222 // "Kapton"
#define UI_TEXT_BLUETAPE_ID 223 // "Blue Paper Tape"
#define UI_TEXT_PETTAPE_ID 224 // "Green PET Tape"
#define UI_TEXT_GLUESTICK_ID 225 // "Glue Stick"
#define UI_TEXT_CUSTOM_ID 226 // "Custom"
#define UI_TEXT_COATING_CUSTOM_ID 227 // "Custom : %oCmm"
#define UI_TEXT_LANGUAGE_ID 228 // "Language"
#define UI_TEXT_MAINPAGE6_1_ID 229 //"\xa %e0/%E0\xb0 X:%x0"
#define UI_TEXT_MAINPAGE6_2_ID 230 //"\xa %e1/%E1\xb0 Y:%x1"
#define UI_TEXT_MAINPAGE6_3_ID 231 //"\xe %eb/%Eb\xb0 Z:%x2",
#define UI_TEXT_MAINPAGE6_4_ID 232 //"Mul: %om%%% \xfd E: %x4m"
#define UI_TEXT_MAINPAGE6_5_ID 233 //"Buf: %oB"
#define UI_TEXT_MAINPAGE6_6_ID 234 //"%os"
#define UI_TEXT_MAINPAGE_TEMP_BED_ID 235 //cTEMP "%ec/%Ec" cDEG "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_BED_ID 236 //"B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_Z_BUF_ID 237 //"Z:%x2 Buf : %oB"
#define UI_TEXT_MAINPAGE_MUL_EUSAGE_ID 238 //"Mul: %om E:%x4"
#define UI_TEXT_MAINPAGE_XY_ID 239 //"X:%x0 Y:%x1"
#define UI_TEXT_PRINT_TIME_VALUE_ID 240 //"%Ut"
#define UI_TEXT_PRINT_FILAMENT_VALUE_ID 241 //"%Uf m"
#define UI_TEXT_METER_PRINTED_ID 242 //"%Uf m " UI_TEXT_PRINTED
#define UI_TEXT_STATUS_ID 243 //"%os"
#define UI_TEXT_EMPTY_ID 244 //""
#define UI_TEXT_TEMP_SET_ID 245 //cTEMP "%ec/%Ec" cDEG
#define UI_TEXT_CURRENT_TEMP_ID 246 //cTEMP "%ec" cDEG
#define UI_TEXT_COATING_THICKNESS_ID 247 //" %oCmm"
#define UI_TEXT_EXTR3_TEMP_ID 248 // "Temp. 4 : %E3" cDEG "C"
#define UI_TEXT_EXTR4_TEMP_ID 249 // "Temp. 5 : %E4" cDEG "C"
#define UI_TEXT_EXTR5_TEMP_ID 250 // "Temp. 6 : %E5" cDEG "C"
#define UI_TEXT_EXTR3_OFF_ID 251
#define UI_TEXT_EXTR4_OFF_ID 252
#define UI_TEXT_EXTR5_OFF_ID 253
#define UI_TEXT_EXTR3_SELECT_ID 254
#define UI_TEXT_EXTR4_SELECT_ID 255
#define UI_TEXT_EXTR5_SELECT_ID 256
#define UI_TEXT_DITTO_0_ID 257
#define UI_TEXT_DITTO_1_ID 258
#define UI_TEXT_DITTO_2_ID 259
#define UI_TEXT_DITTO_3_ID 260
#define UI_TEXT_ZPROBE_HEIGHT_ID 261
#define UI_TEXT_OFFSETS_ID 262
#define UI_TEXT_X_OFFSET_ID 263
#define UI_TEXT_Y_OFFSET_ID 264
#define UI_TEXT_Z_OFFSET_ID 265
#define UI_TEXT_DBG_ENDSTOP_ID 266 // "EndStop:%dp"
// Universal definitions
#define UI_TEXT_SEL cSEL
#define UI_TEXT_NOSEL cUNSEL
// At first all terms in english are defined. After that the selected language
// can overwrite the definition. That way new strings are at least in english
// available.
#define UI_TEXT_ON_EN "On"
#define UI_TEXT_OFF_EN "Off"
#define UI_TEXT_NA_EN "N/A" // Output for not available
#define UI_TEXT_YES_EN "Yes"
#define UI_TEXT_NO_EN "No"
#define UI_TEXT_PRINT_POS_EN "Printing..."
#define UI_TEXT_PRINTING_EN "Printing"
#define UI_TEXT_IDLE_EN "Idle"
#define UI_TEXT_NOSDCARD_EN "No SD card"
#define UI_TEXT_ERROR_EN "**** ERROR ****"
#define UI_TEXT_BACK_EN "Back " cUP
#define UI_TEXT_QUICK_SETTINGS_EN "Quick settings"
#define UI_TEXT_ERRORMSG_EN "%oe"
#define UI_TEXT_CONFIGURATION_EN "Configuration"
#define UI_TEXT_POSITION_EN "Position"
#define UI_TEXT_EXTRUDER_EN "Extruder"
#define UI_TEXT_SD_CARD_EN "SD card"
#define UI_TEXT_DEBUGGING_EN "Debugging"
#define UI_TEXT_HOME_DELTA_EN "Home delta"
#define UI_TEXT_HOME_ALL_EN "Home all"
#define UI_TEXT_HOME_X_EN "Home X"
#define UI_TEXT_HOME_Y_EN "Home Y"
#define UI_TEXT_HOME_Z_EN "Home Z"
#define UI_TEXT_PREHEAT_PLA_EN "Preheat PLA"
#define UI_TEXT_PREHEAT_ABS_EN "Preheat ABS"
#define UI_TEXT_LIGHTS_ONOFF_EN "Lights:%lo"
#define UI_TEXT_COOLDOWN_EN "Cooldown"
#define UI_TEXT_SET_TO_ORIGIN_EN "Set to origin"
#define UI_TEXT_DISABLE_STEPPER_EN "Disable stepper"
#define UI_TEXT_X_POSITION_EN "X position"
#define UI_TEXT_X_POS_FAST_EN "X pos. fast"
#define UI_TEXT_Y_POSITION_EN "Y position"
#define UI_TEXT_Y_POS_FAST_EN "Y pos. fast"
#define UI_TEXT_Z_POSITION_EN "Z position"
#define UI_TEXT_Z_POS_FAST_EN "Z pos. fast"
#define UI_TEXT_E_POSITION_EN "Extr. position"
#define UI_TEXT_BED_TEMP_EN "Bed temp:%eb/%Eb" cDEG "C"
#define UI_TEXT_EXTR0_TEMP_EN "Temp. 1 :%e0/%E0" cDEG "C"
#define UI_TEXT_EXTR1_TEMP_EN "Temp. 2 :%e1/%E1" cDEG "C"
#define UI_TEXT_EXTR2_TEMP_EN "Temp. 3 :%e2/%E2" cDEG "C"
#define UI_TEXT_EXTR0_OFF_EN "Turn extr. 1 off"
#define UI_TEXT_EXTR1_OFF_EN "Turn extr. 2 off"
#define UI_TEXT_EXTR2_OFF_EN "Turn extr. 3 off"
#define UI_TEXT_EXTR0_SELECT_EN "%X0 Select extr. 1"
#define UI_TEXT_EXTR1_SELECT_EN "%X1 Select extr. 2"
#define UI_TEXT_EXTR2_SELECT_EN "%X2 Select extr. 3"
#define UI_TEXT_EXTR_ORIGIN_EN "Set Origin"
#define UI_TEXT_PRINT_X_EN "Print X:%ax"
#define UI_TEXT_PRINT_Y_EN "Print Y:%ay"
#define UI_TEXT_PRINT_Z_EN "Print Z:%az"
#define UI_TEXT_PRINT_Z_DELTA_EN "Print:%az"
#define UI_TEXT_MOVE_X_EN "Move X :%aX"
#define UI_TEXT_MOVE_Y_EN "Move Y :%aY"
#define UI_TEXT_MOVE_Z_EN "Move Z :%aZ"
#define UI_TEXT_MOVE_Z_DELTA_EN "Move:%aZ"
#define UI_TEXT_JERK_EN "Jerk :%aj"
#define UI_TEXT_ZJERK_EN "Z-Jerk :%aJ"
#define UI_TEXT_ACCELERATION_EN "Acceleration"
#define UI_TEXT_STORE_TO_EEPROM_EN "Store to EEPROM"
#define UI_TEXT_LOAD_EEPROM_EN "Load f. EEPROM"
#define UI_TEXT_DBG_ECHO_EN "Echo :%do"
#define UI_TEXT_DBG_INFO_EN "Info :%di"
#define UI_TEXT_DBG_ERROR_EN "Errors :%de"
#define UI_TEXT_DBG_DRYRUN_EN "Dry run:%dd"
#define UI_TEXT_DBG_ENDSTOP_EN "EndStop:%dp"
#define UI_TEXT_OPS_OFF_EN "%O0 OPS off"
#define UI_TEXT_OPS_CLASSIC_EN "%O1 OPS classic"
#define UI_TEXT_OPS_FAST_EN "%O2 OPS fast"
#define UI_TEXT_OPS_RETRACT_EN "Retract :%Or"
#define UI_TEXT_OPS_BACKSLASH_EN "Backsl. :%Ob"
#define UI_TEXT_OPS_MINDIST_EN "Min.dist :%Od"
#define UI_TEXT_OPS_MOVE_AFTER_EN "Move after:%Oa"
#define UI_TEXT_ANTI_OOZE_EN "Anti ooze"
#define UI_TEXT_PRINT_FILE_EN "Print file"
#define UI_TEXT_PAUSE_PRINT_EN "Pause print"
#define UI_TEXT_CONTINUE_PRINT_EN "Continue print"
#define UI_TEXT_UNMOUNT_CARD_EN "Unmount card"
#define UI_TEXT_MOUNT_CARD_EN "Mount card"
#define UI_TEXT_DELETE_FILE_EN "Delete file"
#define UI_TEXT_FEEDRATE_EN "Feedrate"
#define UI_TEXT_FEED_MAX_X_EN "Max X:%fx"
#define UI_TEXT_FEED_MAX_Y_EN "Max Y:%fy"
#define UI_TEXT_FEED_MAX_Z_EN "Max Z:%fz"
#define UI_TEXT_FEED_MAX_Z_DELTA_EN "Max:%fz"
#define UI_TEXT_FEED_HOME_X_EN "Home X:%fX"
#define UI_TEXT_FEED_HOME_Y_EN "Home Y:%fY"
#define UI_TEXT_FEED_HOME_Z_EN "Home Z:%fZ"
#define UI_TEXT_FEED_HOME_Z_DELTA_EN "Home:%fZ"
#define UI_TEXT_ACTION_XPOSITION4A_EN "X:%x0 mm %dx%dX"
#define UI_TEXT_ACTION_XPOSITION4B_EN "Min endstop:%sx"
#define UI_TEXT_ACTION_XPOSITION4C_EN "Max endstop:%sX"
#define UI_TEXT_ACTION_XPOSITION4D_EN ""
#define UI_TEXT_ACTION_YPOSITION4A_EN "Y:%x1 mm %dy%dY"
#define UI_TEXT_ACTION_YPOSITION4B_EN "Min endstop:%sy"
#define UI_TEXT_ACTION_YPOSITION4C_EN "Max endstop:%sY"
#define UI_TEXT_ACTION_YPOSITION4D_EN ""
#define UI_TEXT_ACTION_ZPOSITION4A_EN "Z:%x2 mm %dz%dZ"
#define UI_TEXT_ACTION_ZPOSITION4B_EN "Min endstop:%sz"
#define UI_TEXT_ACTION_ZPOSITION4C_EN "Max endstop:%sZ"
#define UI_TEXT_ACTION_ZPOSITION4D_EN ""
#define UI_TEXT_ACTION_XPOSITION_FAST4A_EN "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST4B_EN "Min endstop:%sx"
#define UI_TEXT_ACTION_XPOSITION_FAST4C_EN "Max endstop:%sX"
#define UI_TEXT_ACTION_XPOSITION_FAST4D_EN ""
#define UI_TEXT_ACTION_YPOSITION_FAST4A_EN "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST4B_EN "Min endstop:%sy"
#define UI_TEXT_ACTION_YPOSITION_FAST4C_EN "Max endstop:%sY"
#define UI_TEXT_ACTION_YPOSITION_FAST4D_EN ""
#define UI_TEXT_ACTION_ZPOSITION_FAST4A_EN "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST4B_EN "Min endstop:%sz"
#define UI_TEXT_ACTION_ZPOSITION_FAST4C_EN "Max endstop:%sZ"
#define UI_TEXT_ACTION_ZPOSITION_FAST4D_EN ""
#define UI_TEXT_ACTION_EPOSITION_FAST2A_EN "E:%x3 mm"
#define UI_TEXT_ACTION_EPOSITION_FAST2B_EN "1 click = 1 mm"
#define UI_TEXT_ACTION_XPOSITION2A_EN "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION2B_EN "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION2A_EN "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION2B_EN "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION2A_EN "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION2B_EN "Min:%sz Max:%sZ"
#define UI_TEXT_ACTION_XPOSITION_FAST2A_EN "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST2B_EN "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION_FAST2A_EN "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST2B_EN "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION_FAST2A_EN "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST2B_EN "Min:%sz Max:%sZ"
#define UI_TEXT_FANSPEED_EN "Fan speed"
#define UI_TEXT_ACTION_FANSPEED_EN "Fan speed:%Fs%%%"
#define UI_TEXT_FAN_OFF_EN "Turn fan Off"
#define UI_TEXT_FAN_25_EN "Set fan 25%%%"
#define UI_TEXT_FAN_50_EN "Set fan 50%%%"
#define UI_TEXT_FAN_75_EN "Set fan 75%%%"
#define UI_TEXT_FAN_FULL_EN "Set fan full"
#define UI_TEXT_STEPPER_INACTIVE_EN "Stepper inactive"
#define UI_TEXT_STEPPER_INACTIVE2A_EN "Dis. after: %is"
#define UI_TEXT_STEPPER_INACTIVE2B_EN "[min] 0=Off"
#define UI_TEXT_POWER_INACTIVE_EN "Max. inactive"
#define UI_TEXT_POWER_INACTIVE2A_EN "Dis. after: %ip"
#define UI_TEXT_POWER_INACTIVE2B_EN "[min] 0=Off"
#define UI_TEXT_GENERAL_EN "General"
#define UI_TEXT_BAUDRATE_EN "Baudrate:%oc"
#define UI_TEXT_EXTR_STEPS_EN "Steps/MM:%Se"
#define UI_TEXT_EXTR_START_FEED_EN "Start FR:%Xf"
#define UI_TEXT_EXTR_MAX_FEED_EN "Max FR:%XF"
#define UI_TEXT_EXTR_ACCEL_EN "Accel:%XA"
#define UI_TEXT_EXTR_WATCH_EN "Stab.Time:%Xw"
#define UI_TEXT_EXTR_ADVANCE_L_EN "Advance lin:%Xl"
#define UI_TEXT_EXTR_ADVANCE_K_EN "Advance quad:%Xa"
#define UI_TEXT_EXTR_MANAGER_EN "Control:%Xh"
#define UI_TEXT_EXTR_PGAIN_EN "PID P:%Xp"
#define UI_TEXT_EXTR_DEADTIME_EN "Deadtime:%Xp"
#define UI_TEXT_EXTR_DMAX_DT_EN "Control PWM:%XM"
#define UI_TEXT_EXTR_IGAIN_EN "PID I:%Xi"
#define UI_TEXT_EXTR_DGAIN_EN "PID D:%Xd"
#define UI_TEXT_EXTR_DMIN_EN "Drive Min:%Xm"
#define UI_TEXT_EXTR_DMAX_EN "Drive Max:%XM"
#define UI_TEXT_EXTR_PMAX_EN "PID Max:%XD"
#define UI_TEXT_EXTR_XOFF_EN "X-Offset:%Xx"
#define UI_TEXT_EXTR_YOFF_EN "Y-Offset:%Xy"
#define UI_TEXT_STRING_HM_BANGBANG_EN "BangBang"
#define UI_TEXT_STRING_HM_PID_EN "PID"
#define UI_TEXT_STRING_ACTION_EN "Action:%la"
#define UI_TEXT_HEATING_EXTRUDER_EN "Heating extruder"
#define UI_TEXT_HEATING_BED_EN "Heating bed"
#define UI_TEXT_KILLED_EN "Killed"
#define UI_TEXT_STEPPER_DISABLED_EN "Stepper disabled"
#define UI_TEXT_EEPROM_STOREDA_EN "Configuration"
#define UI_TEXT_EEPROM_STOREDB_EN "stored in EEPROM"
#define UI_TEXT_EEPROM_LOADEDA_EN "Configuration"
#define UI_TEXT_EEPROM_LOADEDB_EN "loaded f. EEPROM"
#define UI_TEXT_UPLOADING_EN "Uploading..."
#define UI_TEXT_PAGE_BUFFER_EN "Buffer:%oB"
#define UI_TEXT_PAGE_EXTRUDER_EN " E:%ec/%Ec" cDEG "C" cARROW "%oC"
#define UI_TEXT_PAGE_EXTRUDER1_EN "E1:%e0/%E0" cDEG "C" cARROW "%o0"
#define UI_TEXT_PAGE_EXTRUDER2_EN "E2:%e1/%E1" cDEG "C" cARROW "%o1"
#define UI_TEXT_PAGE_EXTRUDER3_EN "E3:%e2/%E2" cDEG "C" cARROW "%o2"
#define UI_TEXT_PAGE_BED_EN " B:%eb/%Eb" cDEG "C" cARROW "%ob"
#define UI_TEXT_SPEED_MULTIPLY_EN "Speed mul.:%om%%%"
#define UI_TEXT_FLOW_MULTIPLY_EN "Flow mul. :%of%%%"
#define UI_TEXT_SHOW_MEASUREMENT_EN "Show meas."
#define UI_TEXT_RESET_MEASUREMENT_EN "Reset meas."
#define UI_TEXT_SET_MEASURED_ORIGIN_EN "Set Z=0"
#define UI_TEXT_ZCALIB_EN "Z calib."
#define UI_TEXT_SET_P1_EN "Set P1"
#define UI_TEXT_SET_P2_EN "Set P2"
#define UI_TEXT_SET_P3_EN "Set P3"
#define UI_TEXT_CALCULATE_LEVELING_EN "Calculate leveling"
#define UI_TEXT_LEVEL_EN "Level delta"
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP_EN "Wait temp. %XT" cDEG "C"
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS_EN "Wait retr.:%XU mm"
#define UI_TEXT_SD_REMOVED_EN "SD card removed"
#define UI_TEXT_SD_INSERTED_EN "SD card inserted"
#define UI_TEXT_PRINTER_READY_EN "Printer ready."
// Printtime output gets aggregated like <Days_5gisgits>UI_TEXT_PRINTTIME_DAYS<Hours>UI_TEXT_PRINTTIME_HOURS<Minutes>UI_TEXT_PRINTTIME_MINUTES
// ___88 days 12:45
#define UI_TEXT_PRINTTIME_DAYS_EN " days "
#define UI_TEXT_PRINTTIME_HOURS_EN ":"
#define UI_TEXT_PRINTTIME_MINUTES_EN ""
#define UI_TEXT_PRINT_TIME_EN "Printing time"
#define UI_TEXT_PRINT_FILAMENT_EN "Filament printed"
#define UI_TEXT_PRINTED_EN "printed"
#define UI_TEXT_POWER_EN "ATX power on/off"
#define UI_TEXT_STRING_HM_DEADTIME_EN "Dead time"
#define UI_TEXT_STRING_HM_SLOWBANG_EN "SlowBang"
#define UI_TEXT_STOP_PRINT_EN "Stop Print"
#define UI_TEXT_Z_BABYSTEPPING_EN "Z babystep.:%oYmm"
#define UI_TEXT_CHANGE_FILAMENT_EN "Change filament"
#define UI_TEXT_WIZ_CH_FILAMENT1_EN "Change filament"
#define UI_TEXT_WIZ_CH_FILAMENT2_EN "Rotate to move"
#define UI_TEXT_WIZ_CH_FILAMENT3_EN "filament up/down"
#define UI_TEXT_CLICK_DONE_EN "Click when done"
#define UI_TEXT_AUTOLEVEL_ONOFF_EN "Autolevel: %ll"
#define UI_TEXT_SERVOPOS_EN "Servo pos.: %oS"
#define UI_TEXT_IGNORE_M106_EN "Ignore M106 cmd %Fi"
#define UI_TEXT_WIZ_REHEAT1_EN "Click to reheat"
#define UI_TEXT_WIZ_REHEAT2_EN "extruders."
#define UI_TEXT_WIZ_WAITTEMP1_EN "Wait for target"
#define UI_TEXT_WIZ_WAITTEMP2_EN "temperatures ..."
#define UI_TEXT_EXTRUDER_JAM_EN "Extruder jam"
#define UI_TEXT_STANDBY_EN "Standby"
#define UI_TEXT_BED_COATING_EN "Bed coating"
#define UI_TEXT_BED_COATING_SET1_EN "Bed coating set to"
#define UI_TEXT_BED_COATING_SET2_EN ""
#define UI_TEXT_NOCOATING_EN "No coating"
#define UI_TEXT_BUILDTAK_EN "BuildTak"
#define UI_TEXT_KAPTON_EN "Kapton"
#define UI_TEXT_BLUETAPE_EN "Blue paper tape"
#define UI_TEXT_PETTAPE_EN "Green PET tape"
#define UI_TEXT_GLUESTICK_EN "Glue stick"
#define UI_TEXT_CUSTOM_EN "Custom"
#define UI_TEXT_COATING_CUSTOM_EN "Custom:%BCmm"
#define UI_TEXT_LANGUAGE_EN "Language"
#if NUM_EXTRUDER > 2 || MIXING_EXTRUDER != 0
#define UI_TEXT_MAINPAGE6_1_EN "\xa %ec/%Ec\xb0 X:%x0"
#else
#define UI_TEXT_MAINPAGE6_1_EN "\xa %e0/%E0\xb0 X:%x0"
#endif // NUM_EXTRUDER
#if NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_2_EN "\xa %e1/%E1\xb0 Y:%x1"
#elif HAVE_HEATED_BED
#define UI_TEXT_MAINPAGE6_2_EN "\xe %eb/%Eb\xb0 Y:%x1"
#else
#define UI_TEXT_MAINPAGE6_2_EN " Y:%x1"
#endif
#if HAVE_HEATED_BED && NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_3_EN "\xe %eb/%Eb\xb0 Z:%x2"
#elif FEATURE_DITTO_PRINTING
#define UI_TEXT_MAINPAGE6_3_EN "Copies: %ed Z:%x2"
#else
#define UI_TEXT_MAINPAGE6_3_EN "Flow:\xfd %of%%% Z:%x2"
#endif
#define UI_TEXT_MAINPAGE6_4_EN "Mul: %om%%% \xfd E: %x4m"
#define UI_TEXT_MAINPAGE6_5_EN "Buf: %oB"
#define UI_TEXT_MAINPAGE6_6_EN "%os"
#define UI_TEXT_MAINPAGE_TEMP_BED_EN cTEMP "%ec/%Ec" cDEG "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_BED_EN "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_Z_BUF_EN "Z:%x2 Buf : %oB"
#define UI_TEXT_MAINPAGE_MUL_EUSAGE_EN "Mul: %om E:%x4"
#define UI_TEXT_MAINPAGE_XY_EN "X:%x0 Y:%x1"
#define UI_TEXT_PRINT_TIME_VALUE_EN "%Ut"
#define UI_TEXT_PRINT_FILAMENT_VALUE_EN "%Uf m"
#define UI_TEXT_METER_PRINTED_EN "%Uf m " UI_TEXT_PRINTED_EN
#define UI_TEXT_STATUS_EN "%os"
#define UI_TEXT_EMPTY_EN ""
#define UI_TEXT_TEMP_SET_EN cTEMP "%ec/%Ec" cDEG
#define UI_TEXT_CURRENT_TEMP_EN cTEMP "%ec" cDEG
#define UI_TEXT_COATING_THICKNESS_EN " %BCmm"
#define UI_TEXT_EXTR3_TEMP_EN "Temp. 4 :%e3/%E3" cDEG "C"
#define UI_TEXT_EXTR4_TEMP_EN "Temp. 5 :%e4/%E4" cDEG "C"
#define UI_TEXT_EXTR5_TEMP_EN "Temp. 6 :%e5/%E5" cDEG "C"
#define UI_TEXT_EXTR3_OFF_EN "Turn extr. 4 off"
#define UI_TEXT_EXTR4_OFF_EN "Turn extr. 5 off"
#define UI_TEXT_EXTR5_OFF_EN "Turn extr. 6 off"
#define UI_TEXT_EXTR3_SELECT_EN "%X3 Select extr. 4"
#define UI_TEXT_EXTR4_SELECT_EN "%X4 Select extr. 5"
#define UI_TEXT_EXTR5_SELECT_EN "%X5 Select extr. 6"
#define UI_TEXT_DITTO_0_EN "%D0 No copies"
#define UI_TEXT_DITTO_1_EN "%D1 1 copy"
#define UI_TEXT_DITTO_2_EN "%D2 2 copies"
#define UI_TEXT_DITTO_3_EN "%D3 3 copies"
#define UI_TEXT_ZPROBE_HEIGHT_EN "Z-probe height:%zh"
#define UI_TEXT_OFFSETS_EN "Set print offsets"
#define UI_TEXT_X_OFFSET_EN "Set X offset:%T0mm"
#define UI_TEXT_Y_OFFSET_EN "Set Y offset:%T1mm"
#define UI_TEXT_Z_OFFSET_EN "Set Z offset:%T2mm"
// *************** German translation ****************
#define UI_TEXT_ON_DE "An"
#define UI_TEXT_OFF_DE "Aus"
#define UI_TEXT_NA_DE "nv"
#define UI_TEXT_YES_DE "Ja"
#define UI_TEXT_NO_DE "Nein"
#define UI_TEXT_PRINT_POS_DE "Drucke..."
#define UI_TEXT_PRINTING_DE "Drucken"
#define UI_TEXT_IDLE_DE "Leerlauf"
#define UI_TEXT_NOSDCARD_DE "Keine SD Karte"
#define UI_TEXT_ERROR_DE "**** FEHLER ****"
#define UI_TEXT_BACK_DE "Zur" STR_uuml "ck " cUP
#define UI_TEXT_QUICK_SETTINGS_DE "Schnelleinst."
#define UI_TEXT_ERRORMSG_DE "%oe"
#define UI_TEXT_CONFIGURATION_DE "Konfiguration"
#define UI_TEXT_POSITION_DE "Position"
#define UI_TEXT_EXTRUDER_DE "Extruder"
#define UI_TEXT_SD_CARD_DE "SD Karte"
#define UI_TEXT_DEBUGGING_DE "Debugging"
#define UI_TEXT_HOME_DELTA_DE "Home Delta"
#define UI_TEXT_HOME_ALL_DE "Home Alle"
#define UI_TEXT_HOME_X_DE "Home X"
#define UI_TEXT_HOME_Y_DE "Home Y"
#define UI_TEXT_HOME_Z_DE "Home Z"
#define UI_TEXT_PREHEAT_PLA_DE "Vorheizen PLA"
#define UI_TEXT_PREHEAT_ABS_DE "Vorheizen ABS"
#define UI_TEXT_LIGHTS_ONOFF_DE "Lampen: %lo"
#define UI_TEXT_COOLDOWN_DE "Abk" STR_uuml "hlen"
#define UI_TEXT_SET_TO_ORIGIN_DE "Setze Nullpunkt"
#define UI_TEXT_DISABLE_STEPPER_DE "Motoren Aussch."
#define UI_TEXT_X_POSITION_DE "X Position"
#define UI_TEXT_X_POS_FAST_DE "X Pos. Schnell"
#define UI_TEXT_Y_POSITION_DE "Y Position"
#define UI_TEXT_Y_POS_FAST_DE "Y Pos. Schnell"
#define UI_TEXT_Z_POSITION_DE "Z Position"
#define UI_TEXT_Z_POS_FAST_DE "Z Pos. Schnell"
#define UI_TEXT_E_POSITION_DE "Extr. Position"
#define UI_TEXT_BED_TEMP_DE "Bed Temp:%eb/%Eb" cDEG "C"
#define UI_TEXT_EXTR0_TEMP_DE "Temp. 1 :%e0/%E0" cDEG "C"
#define UI_TEXT_EXTR1_TEMP_DE "Temp. 2 :%e1/%E1" cDEG "C"
#define UI_TEXT_EXTR2_TEMP_DE "Temp. 3 :%e2/%E2" cDEG "C"
#define UI_TEXT_EXTR0_OFF_DE "Extruder 1 Aus"
#define UI_TEXT_EXTR1_OFF_DE "Extruder 2 Aus"
#define UI_TEXT_EXTR2_OFF_DE "Extruder 3 Aus"
#define UI_TEXT_EXTR0_SELECT_DE "%X0 W" STR_auml "hle Extr. 1"
#define UI_TEXT_EXTR1_SELECT_DE "%X1 W" STR_auml "hle Extr. 2"
#define UI_TEXT_EXTR2_SELECT_DE "%X2 W" STR_auml "hle Extr. 3"
#define UI_TEXT_EXTR_ORIGIN_DE "Setze Nullpunkt"
#define UI_TEXT_PRINT_X_DE "Drucken X:%ax"
#define UI_TEXT_PRINT_Y_DE "Drucken Y:%ay"
#define UI_TEXT_PRINT_Z_DE "Drucken Z:%az"
#define UI_TEXT_PRINT_Z_DELTA_DE "Drucken:%az"
#define UI_TEXT_MOVE_X_DE "Bewegen X:%aX"
#define UI_TEXT_MOVE_Y_DE "Bewegen Y:%aY"
#define UI_TEXT_MOVE_Z_DE "Bewegen Z:%aZ"
#define UI_TEXT_MOVE_Z_DELTA_DE "Bewegen:%aZ"
#define UI_TEXT_JERK_DE "Ruck :%aj"
#define UI_TEXT_ZJERK_DE "Z-Ruck :%aJ"
#define UI_TEXT_ACCELERATION_DE "Beschleunigung"
#define UI_TEXT_STORE_TO_EEPROM_DE "Sichere EEPROM"
#define UI_TEXT_LOAD_EEPROM_DE "Lade vom EEPROM"
#define UI_TEXT_DBG_ECHO_DE "Echo :%do"
#define UI_TEXT_DBG_INFO_DE "Info :%di"
#define UI_TEXT_DBG_ERROR_DE "Fehler :%de"
#define UI_TEXT_DBG_DRYRUN_DE "Trockenlauf:%dd"
#define UI_TEXT_DBG_ENDSTOP_DE "EndStop :%dp"
#define UI_TEXT_OPS_OFF_DE "%O0 OPS Aus"
#define UI_TEXT_OPS_CLASSIC_DE "%O1 OPS Klassisch"
#define UI_TEXT_OPS_FAST_DE "%O2 OPS Schnell"
#define UI_TEXT_OPS_RETRACT_DE "Einfahren :%Or"
#define UI_TEXT_OPS_BACKSLASH_DE "Backsl. :%Ob"
#define UI_TEXT_OPS_MINDIST_DE "Min.Abst. :%Od"
#define UI_TEXT_OPS_MOVE_AFTER_DE "Start nach:%Oa"
#define UI_TEXT_ANTI_OOZE_DE "Anti Ooze"
#define UI_TEXT_PRINT_FILE_DE "Drucke Datei"
#define UI_TEXT_PAUSE_PRINT_DE "Druck Pausieren"
#define UI_TEXT_CONTINUE_PRINT_DE "Druck Forts."
#define UI_TEXT_UNMOUNT_CARD_DE "Unmount Karte"
#define UI_TEXT_MOUNT_CARD_DE "Mount Karte"
#define UI_TEXT_DELETE_FILE_DE "Datei l" STR_ouml "schen"
#define UI_TEXT_FEEDRATE_DE "Feedrate"
#define UI_TEXT_FEED_MAX_X_DE "Max X:%fx"
#define UI_TEXT_FEED_MAX_Y_DE "Max Y:%fy"
#define UI_TEXT_FEED_MAX_Z_DE "Max Z:%fz"
#define UI_TEXT_FEED_MAX_Z_DELTA_DE "Max:%fz"
#define UI_TEXT_FEED_HOME_X_DE "Home X:%fX"
#define UI_TEXT_FEED_HOME_Y_DE "Home Y:%fY"
#define UI_TEXT_FEED_HOME_Z_DE "Home Z:%fZ"
#define UI_TEXT_FEED_HOME_Z_DELTA_DE "Home:%fZ"
#define UI_TEXT_ACTION_XPOSITION4A_DE "X:%x0 mm %dx%dX"
#define UI_TEXT_ACTION_XPOSITION4B_DE "Min Endstopp:%sx"
#define UI_TEXT_ACTION_XPOSITION4C_DE "Max Endstopp:%sX"
#define UI_TEXT_ACTION_XPOSITION4D_DE ""
#define UI_TEXT_ACTION_YPOSITION4A_DE "Y:%x1 mm %dy%dY"
#define UI_TEXT_ACTION_YPOSITION4B_DE "Min Endstopp:%sy"
#define UI_TEXT_ACTION_YPOSITION4C_DE "Max Endstopp:%sY"
#define UI_TEXT_ACTION_YPOSITION4D_DE ""
#define UI_TEXT_ACTION_ZPOSITION4A_DE "Z:%x2 mm %dz%dZ"
#define UI_TEXT_ACTION_ZPOSITION4B_DE "Min Endstopp:%sz"
#define UI_TEXT_ACTION_ZPOSITION4C_DE "Max Endstopp:%sZ"
#define UI_TEXT_ACTION_ZPOSITION4D_DE ""
#define UI_TEXT_ACTION_XPOSITION_FAST4A_DE "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST4B_DE "Min Endstopp:%sx"
#define UI_TEXT_ACTION_XPOSITION_FAST4C_DE "Max Endstopp:%sX"
#define UI_TEXT_ACTION_XPOSITION_FAST4D_DE ""
#define UI_TEXT_ACTION_YPOSITION_FAST4A_DE "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST4B_DE "Min Endstopp:%sy"
#define UI_TEXT_ACTION_YPOSITION_FAST4C_DE "Max Endstopp:%sY"
#define UI_TEXT_ACTION_YPOSITION_FAST4D_DE ""
#define UI_TEXT_ACTION_ZPOSITION_FAST4A_DE "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST4B_DE "Min Endstopp:%sz"
#define UI_TEXT_ACTION_ZPOSITION_FAST4C_DE "Max Endstopp:%sZ"
#define UI_TEXT_ACTION_ZPOSITION_FAST4D_DE ""
#define UI_TEXT_ACTION_EPOSITION_FAST2A_DE "E:%x3 mm"
#define UI_TEXT_ACTION_EPOSITION_FAST2B_DE "1 klick = 1 mm"
#define UI_TEXT_ACTION_XPOSITION2A_DE "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION2B_DE "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION2A_DE "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION2B_DE "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION2A_DE "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION2B_DE "Min:%sz Max:%sZ"
#define UI_TEXT_ACTION_XPOSITION_FAST2A_DE "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST2B_DE "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION_FAST2A_DE "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST2B_DE "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION_FAST2A_DE "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST2B_DE "Min:%sz Max:%sZ"
#define UI_TEXT_FANSPEED_DE "L" STR_uuml "fter"
#define UI_TEXT_ACTION_FANSPEED_DE "L" STR_uuml "fter:%Fs%%%"
#define UI_TEXT_FAN_OFF_DE "L" STR_uuml "fter Aus"
#define UI_TEXT_FAN_25_DE "L" STR_uuml "fter auf 25%%%"
#define UI_TEXT_FAN_50_DE "L" STR_uuml "fter auf 50%%%"
#define UI_TEXT_FAN_75_DE "L" STR_uuml "fter auf 75%%%"
#define UI_TEXT_FAN_FULL_DE "L" STR_uuml "fter Voll"
#define UI_TEXT_STEPPER_INACTIVE_DE "Motor Inaktiv"
#define UI_TEXT_STEPPER_INACTIVE2A_DE "Aus nach: %is"
#define UI_TEXT_STEPPER_INACTIVE2B_DE "[min] 0=Aus"
#define UI_TEXT_POWER_INACTIVE_DE "Max. Inaktiv"
#define UI_TEXT_POWER_INACTIVE2A_DE "Aus nach: %ip"
#define UI_TEXT_POWER_INACTIVE2B_DE "[min] 0=Aus"
#define UI_TEXT_GENERAL_DE "Allgemein"
#define UI_TEXT_BAUDRATE_DE "Baudrate:%oc"
#define UI_TEXT_EXTR_STEPS_DE "Schr/MM:%Se"
#define UI_TEXT_EXTR_START_FEED_DE "Start FR:%Xf"
#define UI_TEXT_EXTR_MAX_FEED_DE "Max FR:%XF"
#define UI_TEXT_EXTR_ACCEL_DE "Beschl.:%XA"
#define UI_TEXT_EXTR_WATCH_DE "Stab.Zeit:%Xw"
#define UI_TEXT_EXTR_ADVANCE_L_DE "Advance lin:%Xl"
#define UI_TEXT_EXTR_ADVANCE_K_DE "Advance quad:%Xa"
#define UI_TEXT_EXTR_MANAGER_DE "Regler:%Xh"
#define UI_TEXT_EXTR_PGAIN_DE "PID P:%Xp"
#define UI_TEXT_EXTR_DEADTIME_DE "Totzeit:%Xp"
#define UI_TEXT_EXTR_DMAX_DT_DE "Controll-PWM:%XM"
#define UI_TEXT_EXTR_IGAIN_DE "PID I:%Xi"
#define UI_TEXT_EXTR_DGAIN_DE "PID D:%Xd"
#define UI_TEXT_EXTR_DMIN_DE "Drive Min:%Xm"
#define UI_TEXT_EXTR_DMAX_DE "Drive Max:%XM"
#define UI_TEXT_EXTR_PMAX_DE "PID Max:%XD"
#define UI_TEXT_EXTR_XOFF_DE "X-Offset:%Xx"
#define UI_TEXT_EXTR_YOFF_DE "Y-Offset:%Xy"
#define UI_TEXT_STRING_HM_BANGBANG_DE "BangBang"
#define UI_TEXT_STRING_HM_PID_DE "PID"
#define UI_TEXT_STRING_ACTION_DE "Aktion:%la"
#define UI_TEXT_HEATING_EXTRUDER_DE "Heize Extruder"
#define UI_TEXT_HEATING_BED_DE "Heize Druckbett"
#define UI_TEXT_KILLED_DE "Angehalten"
#define UI_TEXT_STEPPER_DISABLED_DE "Motoren Aus"
#define UI_TEXT_EEPROM_STOREDA_DE "Konfiguration"
#define UI_TEXT_EEPROM_STOREDB_DE "gespeichert."
#define UI_TEXT_EEPROM_LOADEDA_DE "Konfiguration"
#define UI_TEXT_EEPROM_LOADEDB_DE "geladen."
#define UI_TEXT_UPLOADING_DE "Hochladen..."
#define UI_TEXT_PAGE_BUFFER_DE "Puffer:%oB"
#define UI_TEXT_PAGE_EXTRUDER_DE " E:%ec/%Ec" cDEG "C" cARROW "%oC"
#define UI_TEXT_PAGE_EXTRUDER1_DE "E1:%e0/%E0" cDEG "C" cARROW "%o0"
#define UI_TEXT_PAGE_EXTRUDER2_DE "E2:%e1/%E1" cDEG "C" cARROW "%o1"
#define UI_TEXT_PAGE_EXTRUDER3_DE "E3:%e2/%E2" cDEG "C" cARROW "%o2"
#define UI_TEXT_PAGE_BED_DE " B:%eb/%Eb" cDEG "C" cARROW "%ob"
#define UI_TEXT_SPEED_MULTIPLY_DE "Geschw.Mul:%om%%%"
#define UI_TEXT_FLOW_MULTIPLY_DE "Flow Mul.:%of%%%"
#define UI_TEXT_SHOW_MEASUREMENT_DE "Zeige Messung"
#define UI_TEXT_RESET_MEASUREMENT_DE "Reset Messung"
#define UI_TEXT_SET_MEASURED_ORIGIN_DE "Setze Z=0"
#define UI_TEXT_ZCALIB_DE "Z Kalib."
#define UI_TEXT_SET_P1_DE "Setze P1"
#define UI_TEXT_SET_P2_DE "Setze P2"
#define UI_TEXT_SET_P3_DE "Setze P3"
#define UI_TEXT_CALCULATE_LEVELING_DE "Berechne Leveling"
#define UI_TEXT_LEVEL_DE "Level delta"
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP_DE "Wartetemp.%XT" cDEG "C"
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS_DE "R" STR_uuml "ckz. um:%XU mm"
#define UI_TEXT_SD_REMOVED_DE "SD Karte entfernt"
#define UI_TEXT_SD_INSERTED_DE "SD Karte eingelegt"
#define UI_TEXT_PRINTER_READY_DE "Drucker bereit."
// Printtime output gets aggregated like <Days_5gisgits>UI_TEXT_PRINTTIME_DAYS<Hours>UI_TEXT_PRINTTIME_HOURS<Minutes>UI_TEXT_PRINTTIME_MINUTES
// ___88 days 12:45
#define UI_TEXT_PRINTTIME_DAYS_DE " Tage "
#define UI_TEXT_PRINTTIME_HOURS_DE ":"
#define UI_TEXT_PRINTTIME_MINUTES_DE ""
#define UI_TEXT_PRINT_TIME_DE "Ges. Druckzeit"
#define UI_TEXT_PRINT_FILAMENT_DE "Filament gedruckt"
#define UI_TEXT_PRINTED_DE "gedruckt"
#define UI_TEXT_POWER_DE "ATX Netzteil an/aus"
#define UI_TEXT_STRING_HM_DEADTIME_DE "Totzeit"
#define UI_TEXT_STRING_HM_SLOWBANG_DE "Langs.BB"
#define UI_TEXT_STOP_PRINT_DE "Druck abbrechen"
#define UI_TEXT_Z_BABYSTEPPING_DE "Z Babyschr.:%oYmm"
#define UI_TEXT_CHANGE_FILAMENT_DE "Filamentwechsel"
#define UI_TEXT_WIZ_CH_FILAMENT1_DE "Filamentwechsel:"
#define UI_TEXT_WIZ_CH_FILAMENT2_DE "Zum man. f" STR_ouml "rdern"
#define UI_TEXT_WIZ_CH_FILAMENT3_DE "Men" STR_uuml "knopf drehen"
#define UI_TEXT_CLICK_DONE_DE "Weiter mit Klick"
#define UI_TEXT_AUTOLEVEL_ONOFF_DE "Autolevel: %ll"
#define UI_TEXT_SERVOPOS_DE "Servo Pos.: %oS"
#define UI_TEXT_IGNORE_M106_DE "Ignoriere M106 %Fi"
#define UI_TEXT_WIZ_REHEAT1_DE "Klicke zum Aufw" STR_auml "rmen"
#define UI_TEXT_WIZ_REHEAT2_DE "der Extruder."
#define UI_TEXT_WIZ_WAITTEMP1_DE "Warte auf"
#define UI_TEXT_WIZ_WAITTEMP2_DE "Zieltemperatur..."
#define UI_TEXT_EXTRUDER_JAM_DE "Extruderstau"
#define UI_TEXT_STANDBY_DE "Standby"
#define UI_TEXT_BED_COATING_DE "Bettbeschichtung"
#define UI_TEXT_BED_COATING_SET1_DE "Bettbeschichtung:"
#define UI_TEXT_BED_COATING_SET2_DE ""
#define UI_TEXT_NOCOATING_DE "Unbeschichtet"
#define UI_TEXT_BUILDTAK_DE "BuildTak"
#define UI_TEXT_KAPTON_DE "Kapton"
#define UI_TEXT_BLUETAPE_DE "Blaues Kreppband"
#define UI_TEXT_PETTAPE_DE "Gr" STR_uuml "nes PET Band"
#define UI_TEXT_GLUESTICK_DE "Klebestift"
#define UI_TEXT_CUSTOM_DE "Individuell"
#define UI_TEXT_COATING_CUSTOM_DE "Indiv.:%BCmm"
#define UI_TEXT_LANGUAGE_DE "Sprache"
#if NUM_EXTRUDER > 2 || MIXING_EXTRUDER != 0
#define UI_TEXT_MAINPAGE6_1_DE "\xa %ec/%Ec\xb0 X:%x0"
#else
#define UI_TEXT_MAINPAGE6_1_DE "\xa %e0/%E0\xb0 X:%x0"
#endif // NUM_EXTRUDER
#if NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_2_DE "\xa %e1/%E1\xb0 Y:%x1"
#elif HAVE_HEATED_BED
#define UI_TEXT_MAINPAGE6_2_DE "\xe %eb/%Eb\xb0 Y:%x1"
#else
#define UI_TEXT_MAINPAGE6_2_DE " Y:%x1"
#endif
#if HAVE_HEATED_BED && NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_3_DE "\xe %eb/%Eb\xb0 Z:%x2"
#elif FEATURE_DITTO_PRINTING
#define UI_TEXT_MAINPAGE6_3_DE "Kopien: %ed Z:%x2"
#else
#define UI_TEXT_MAINPAGE6_3_DE "Fluss:\xfd %of%%% Z:%x2"
#endif
#define UI_TEXT_MAINPAGE6_4_DE "Mul: %om%%% \xfd E: %x4m"
#define UI_TEXT_MAINPAGE6_5_DE "Puf: %oB"
#define UI_TEXT_MAINPAGE6_6_DE "%os"
#define UI_TEXT_MAINPAGE_TEMP_BED_DE cTEMP "%ec/%Ec" cDEG "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_BED_DE "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_Z_BUF_DE "Z:%x2 Buf : %oB"
#define UI_TEXT_MAINPAGE_MUL_EUSAGE_DE "Mul: %om E:%x4"
#define UI_TEXT_MAINPAGE_XY_DE "X:%x0 Y:%x1"
#define UI_TEXT_PRINT_TIME_VALUE_DE "%Ut"
#define UI_TEXT_PRINT_FILAMENT_VALUE_DE "%Uf m"
#define UI_TEXT_METER_PRINTED_DE "%Uf m " UI_TEXT_PRINTED_DE
#define UI_TEXT_STATUS_DE "%os"
#define UI_TEXT_EMPTY_DE ""
#define UI_TEXT_TEMP_SET_DE cTEMP "%ec/%Ec" cDEG
#define UI_TEXT_CURRENT_TEMP_DE cTEMP "%ec" cDEG
#define UI_TEXT_COATING_THICKNESS_DE " %BCmm"
#define UI_TEXT_EXTR3_TEMP_DE "Temp. 4 :%e3/%E3" cDEG "C"
#define UI_TEXT_EXTR4_TEMP_DE "Temp. 5 :%e4/%E4" cDEG "C"
#define UI_TEXT_EXTR5_TEMP_DE "Temp. 6 :%e5/%E5" cDEG "C"
#define UI_TEXT_EXTR3_OFF_DE "Extruder 4 Aus"
#define UI_TEXT_EXTR4_OFF_DE "Extruder 5 Aus"
#define UI_TEXT_EXTR5_OFF_DE "Extruder 6 Aus"
#define UI_TEXT_EXTR3_SELECT_DE "%X3 W" STR_auml "hle Extr. 4"
#define UI_TEXT_EXTR4_SELECT_DE "%X4 W" STR_auml "hle Extr. 5"
#define UI_TEXT_EXTR5_SELECT_DE "%X5 W" STR_auml "hle Extr. 6"
#define UI_TEXT_DITTO_0_DE "%D0 Keine Kopien"
#define UI_TEXT_DITTO_1_DE "%D1 1 Kopie"
#define UI_TEXT_DITTO_2_DE "%D2 2 Kopien"
#define UI_TEXT_DITTO_3_DE "%D3 3 Kopien"
#define UI_TEXT_ZPROBE_HEIGHT_DE "Z-Probenh" STR_ouml "he:%zh"
#define UI_TEXT_OFFSETS_DE "Set print offsets"
#define UI_TEXT_X_OFFSET_DE "X-Offset:%T0mm"
#define UI_TEXT_Y_OFFSET_DE "Y-Offset:%T1mm"
#define UI_TEXT_Z_OFFSET_DE "Z-Offset:%T2mm"
// Dutch translation
#define UI_TEXT_ON_NL "Aan"
#define UI_TEXT_OFF_NL "Uit"
#define UI_TEXT_NA_NL "N/A" // Output for not available
#define UI_TEXT_YES_NL "Ja"
#define UI_TEXT_NO_NL "Nee"
#define UI_TEXT_PRINT_POS_NL "Printen..."
#define UI_TEXT_PRINTING_NL "Printen"
#define UI_TEXT_IDLE_NL "Rust"
#define UI_TEXT_NOSDCARD_NL "Geen SD Kaart"
#define UI_TEXT_ERROR_NL "**** FOUT ****"
#define UI_TEXT_BACK_NL "Terug " cUP
#define UI_TEXT_QUICK_SETTINGS_NL "Snel Instelling"
#define UI_TEXT_ERRORMSG_NL "%oe"
#define UI_TEXT_CONFIGURATION_NL "Configuratie"
#define UI_TEXT_POSITION_NL "Positie"
#define UI_TEXT_EXTRUDER_NL "Extruder"
#define UI_TEXT_SD_CARD_NL "SD Kaart"
#define UI_TEXT_DEBUGGING_NL "Debugging"
#define UI_TEXT_HOME_DELTA_NL "Home Delta"
#define UI_TEXT_HOME_ALL_NL "Home Alles"
#define UI_TEXT_HOME_X_NL "Home X"
#define UI_TEXT_HOME_Y_NL "Home Y"
#define UI_TEXT_HOME_Z_NL "Home Z"
#define UI_TEXT_PREHEAT_PLA_NL "Voorverwarmen PLA"
#define UI_TEXT_PREHEAT_ABS_NL "Voorverwarmen ABS"
#define UI_TEXT_LIGHTS_ONOFF_NL "Lichten:%lo"
#define UI_TEXT_COOLDOWN_NL "Koelen"
#define UI_TEXT_SET_TO_ORIGIN_NL "Zet oorsprong"
#define UI_TEXT_DISABLE_STEPPER_NL "Zet motor uit"
#define UI_TEXT_X_POSITION_NL "X Positie"
#define UI_TEXT_X_POS_FAST_NL "X Pos. Snel"
#define UI_TEXT_Y_POSITION_NL "Y Positie"
#define UI_TEXT_Y_POS_FAST_NL "Y Pos. Snel"
#define UI_TEXT_Z_POSITION_NL "Z Positie"
#define UI_TEXT_Z_POS_FAST_NL "Z Pos. Snel"
#define UI_TEXT_E_POSITION_NL "Extr. positie"
#define UI_TEXT_BED_TEMP_NL "Bed Temp:%eb/%Eb" cDEG "C"
#define UI_TEXT_EXTR0_TEMP_NL "Temp. 1 :%e0/%E0" cDEG "C"
#define UI_TEXT_EXTR1_TEMP_NL "Temp. 2 :%e1/%E1" cDEG "C"
#define UI_TEXT_EXTR2_TEMP_NL "Temp. 3 :%e2/%E2" cDEG "C"
#define UI_TEXT_EXTR0_OFF_NL "Extruder 1 Uit"
#define UI_TEXT_EXTR1_OFF_NL "Extruder 2 Uit"
#define UI_TEXT_EXTR2_OFF_NL "Extruder 3 Uit"
#define UI_TEXT_EXTR0_SELECT_NL "%X0 Select Extr. 1"
#define UI_TEXT_EXTR1_SELECT_NL "%X1 Select Extr. 2"
#define UI_TEXT_EXTR2_SELECT_NL "%X2 Select Extr. 3"
#define UI_TEXT_EXTR_ORIGIN_NL "Zet oorsprong"
#define UI_TEXT_PRINT_X_NL "Print X:%ax"
#define UI_TEXT_PRINT_Y_NL "Print Y:%ay"
#define UI_TEXT_PRINT_Z_NL "Print Z:%az"
#define UI_TEXT_PRINT_Z_DELTA_NL "Print:%az"
#define UI_TEXT_MOVE_X_NL "Beweeg X:%aX"
#define UI_TEXT_MOVE_Y_NL "Beweeg Y:%aY"
#define UI_TEXT_MOVE_Z_NL "Beweeg Z:%aZ"
#define UI_TEXT_MOVE_Z_DELTA_NL "Beweeg:%aZ"
#define UI_TEXT_JERK_NL "Ruk:%aj"
#define UI_TEXT_ZJERK_NL "Z-Ruk:%aJ"
#define UI_TEXT_ACCELERATION_NL "Acceleratie"
#define UI_TEXT_STORE_TO_EEPROM_NL "Opslaan n. EEPROM"
#define UI_TEXT_LOAD_EEPROM_NL "Ladd f. EEPROM"
#define UI_TEXT_DBG_ECHO_NL "Echo :%do"
#define UI_TEXT_DBG_INFO_NL "Info :%di"
#define UI_TEXT_DBG_ERROR_NL "Fouten :%de"
#define UI_TEXT_DBG_DRYRUN_NL "Droogloop:%dd"
#define UI_TEXT_DBG_ENDSTOP_NL "EndStop :%dp"
#define UI_TEXT_OPS_OFF_NL "%O0 OPS Uit"
#define UI_TEXT_OPS_CLASSIC_NL "%O1 OPS Klassiek"
#define UI_TEXT_OPS_FAST_NL "%O2 OPS Snel"
#define UI_TEXT_OPS_RETRACT_NL "Terugtrekken:%Or"
#define UI_TEXT_OPS_BACKSLASH_NL "Backsl. :%Ob"
#define UI_TEXT_OPS_MINDIST_NL "Min. afstand:%Od"
#define UI_TEXT_OPS_MOVE_AFTER_NL "Beweeg na:%Oa"
#define UI_TEXT_ANTI_OOZE_NL "Anti lekken"
#define UI_TEXT_PRINT_FILE_NL "Print bestand"
#define UI_TEXT_PAUSE_PRINT_NL "Pauzeer Print"
#define UI_TEXT_CONTINUE_PRINT_NL "Zet print voort"
#define UI_TEXT_UNMOUNT_CARD_NL "Ontkoppel Kaart"
#define UI_TEXT_MOUNT_CARD_NL "Koppel Kaart"
#define UI_TEXT_DELETE_FILE_NL "Verw. bestand"
#define UI_TEXT_FEEDRATE_NL "Beweeg snelheid"
#define UI_TEXT_FEED_MAX_X_NL "Max X:%fx"
#define UI_TEXT_FEED_MAX_Y_NL "Max Y:%fy"
#define UI_TEXT_FEED_MAX_Z_NL "Max Z:%fz"
#define UI_TEXT_FEED_MAX_Z_DELTA_NL "Max:%fz"
#define UI_TEXT_FEED_HOME_X_NL "Home X:%fX"
#define UI_TEXT_FEED_HOME_Y_NL "Home Y:%fY"
#define UI_TEXT_FEED_HOME_Z_NL "Home Z:%fZ"
#define UI_TEXT_FEED_HOME_Z_DELTA_NL "Home:%fZ"
#define UI_TEXT_ACTION_XPOSITION4A_NL "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION4B_NL "Min eindst.:%sx"
#define UI_TEXT_ACTION_XPOSITION4C_NL "Max eindst.:%sX"
#define UI_TEXT_ACTION_XPOSITION4D_NL ""
#define UI_TEXT_ACTION_YPOSITION4A_NL "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION4B_NL "Min eindst.:%sy"
#define UI_TEXT_ACTION_YPOSITION4C_NL "Max eindst.:%sY"
#define UI_TEXT_ACTION_YPOSITION4D_NL ""
#define UI_TEXT_ACTION_ZPOSITION4A_NL "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION4B_NL "Min eindst.:%sz"
#define UI_TEXT_ACTION_ZPOSITION4C_NL "Max eindst.:%sZ"
#define UI_TEXT_ACTION_ZPOSITION4D_NL ""
#define UI_TEXT_ACTION_XPOSITION_FAST4A_NL "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST4B_NL "Min eindst.:%sx"
#define UI_TEXT_ACTION_XPOSITION_FAST4C_NL "Max eindst.:%sX"
#define UI_TEXT_ACTION_XPOSITION_FAST4D_NL ""
#define UI_TEXT_ACTION_YPOSITION_FAST4A_NL "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST4B_NL "Min eindst.:%sy"
#define UI_TEXT_ACTION_YPOSITION_FAST4C_NL "Max eindst.:%sY"
#define UI_TEXT_ACTION_YPOSITION_FAST4D_NL ""
#define UI_TEXT_ACTION_ZPOSITION_FAST4A_NL "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST4B_NL "Min eindst.:%sz"
#define UI_TEXT_ACTION_ZPOSITION_FAST4C_NL "Max eindst.:%sZ"
#define UI_TEXT_ACTION_ZPOSITION_FAST4D_NL ""
#define UI_TEXT_ACTION_EPOSITION_FAST2A_NL "E:%x3 mm"
#define UI_TEXT_ACTION_EPOSITION_FAST2B_NL "1 klik = 1 mm"
#define UI_TEXT_ACTION_XPOSITION2A_NL "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION2B_NL "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION2A_NL "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION2B_NL "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION2A_NL "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION2B_NL "Min:%sz Max:%sZ"
#define UI_TEXT_ACTION_XPOSITION_FAST2A_NL "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST2B_NL "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION_FAST2A_NL "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST2B_NL "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION_FAST2A_NL "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST2B_NL "Min:%sz Max:%sZ"
#define UI_TEXT_FANSPEED_NL "Fan snelheid"
#define UI_TEXT_FAN_OFF_NL "Zet Fan uit"
#define UI_TEXT_ACTION_FANSPEED_NL "Fan snelheid:%Fs%%%"
#define UI_TEXT_FAN_25_NL "Zet Fan 25%%%"
#define UI_TEXT_FAN_50_NL "Zet Fan 50%%%"
#define UI_TEXT_FAN_75_NL "Zet Fan 75%%%"
#define UI_TEXT_FAN_FULL_NL "Zet Fan Vol aan"
#define UI_TEXT_STEPPER_INACTIVE_NL "Motor Inactief"
#define UI_TEXT_STEPPER_INACTIVE2A_NL "Uit na: %is"
#define UI_TEXT_STEPPER_INACTIVE2B_NL "[min] 0=Off"
#define UI_TEXT_POWER_INACTIVE_NL "Max. Inactief"
#define UI_TEXT_POWER_INACTIVE2A_NL "Zet uit na: %ip"
#define UI_TEXT_POWER_INACTIVE2B_NL "[min] 0=Off"
#define UI_TEXT_GENERAL_NL "Algemeen"
#define UI_TEXT_BAUDRATE_NL "Baudrate:%oc"
#define UI_TEXT_EXTR_STEPS_NL "Stappen/MM:%Se"
#define UI_TEXT_EXTR_START_FEED_NL "Start FR.:%Xf"
#define UI_TEXT_EXTR_MAX_FEED_NL "Max FR.:%XF"
#define UI_TEXT_EXTR_ACCEL_NL "Accel:%XA"
#define UI_TEXT_EXTR_WATCH_NL "Stab.Tijd:%Xw"
#define UI_TEXT_EXTR_ADVANCE_L_NL "Advance lin:%Xl"
#define UI_TEXT_EXTR_ADVANCE_K_NL "Advance quad:%Xa"
#define UI_TEXT_EXTR_MANAGER_NL "Control:%Xh"
#define UI_TEXT_EXTR_PGAIN_NL "PID P:%Xp"
#define UI_TEXT_EXTR_DEADTIME_NL "Dode tijd:%Xp"
#define UI_TEXT_EXTR_DMAX_DT_NL "Controle PWM:%XM"
#define UI_TEXT_EXTR_IGAIN_NL "PID I:%Xi"
#define UI_TEXT_EXTR_DGAIN_NL "PID D:%Xd"
#define UI_TEXT_EXTR_DMIN_NL "Drive Min:%Xm"
#define UI_TEXT_EXTR_DMAX_NL "Drive Max:%XM"
#define UI_TEXT_EXTR_PMAX_NL "PID Max:%XD"
#define UI_TEXT_EXTR_XOFF_NL "X-Offset:%Xx"
#define UI_TEXT_EXTR_YOFF_NL "Y-Offset:%Xy"
#define UI_TEXT_STRING_HM_BANGBANG_NL "BangBang"
#define UI_TEXT_STRING_HM_PID_NL "PID"
#define UI_TEXT_STRING_ACTION_NL "Action:%la"
#define UI_TEXT_HEATING_EXTRUDER_NL "Opwarmen Extru."
#define UI_TEXT_HEATING_BED_NL "Opwarmen Bed"
#define UI_TEXT_KILLED_NL "Uitgeschakeld"
#define UI_TEXT_STEPPER_DISABLED_NL "Motor uitgezet"
#define UI_TEXT_EEPROM_STOREDA_NL "Configuratie"
#define UI_TEXT_EEPROM_STOREDB_NL "saved. in EEPROM"
#define UI_TEXT_EEPROM_LOADEDA_NL "Configuratie"
#define UI_TEXT_EEPROM_LOADEDB_NL "loaded f. EEPROM"
#define UI_TEXT_UPLOADING_NL "Uploaden..."
#define UI_TEXT_PAGE_BUFFER_NL "Buffer:%oB"
#define UI_TEXT_PAGE_EXTRUDER_NL " E:%ec/%Ec" cDEG "C" cARROW "%oC"
#define UI_TEXT_PAGE_EXTRUDER1_NL "E1:%e0/%E0" cDEG "C" cARROW "%o0"
#define UI_TEXT_PAGE_EXTRUDER2_NL "E2:%e1/%E1" cDEG "C" cARROW "%o1"
#define UI_TEXT_PAGE_EXTRUDER3_NL "E3:%e2/%E2" cDEG "C" cARROW "%o2"
#define UI_TEXT_PAGE_BED_NL " B:%eb/%Eb" cDEG "C" cARROW "%ob"
#define UI_TEXT_SPEED_MULTIPLY_NL "Snelh. Mul.:%om%%%"
#define UI_TEXT_FLOW_MULTIPLY_NL "Flow Mul.:%of%%%"
#define UI_TEXT_SHOW_MEASUREMENT_NL "Show meting"
#define UI_TEXT_RESET_MEASUREMENT_NL "Reset meting"
#define UI_TEXT_SET_MEASURED_ORIGIN_NL "Set Z=0"
#define UI_TEXT_ZCALIB_NL "Z Calib."
#define UI_TEXT_SET_P1_NL "Set P1"
#define UI_TEXT_SET_P2_NL "Set P2"
#define UI_TEXT_SET_P3_NL "Set P3"
#define UI_TEXT_CALCULATE_LEVELING_NL "Bereken Leveling"
#define UI_TEXT_LEVEL_NL "Level delta"
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP_NL "Wacht Temp. %XT" cDEG "C"
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS_NL "Wacht Retr.:%XU mm"
#define UI_TEXT_SD_REMOVED_NL "SD-kaart verwijderd"
#define UI_TEXT_SD_INSERTED_NL "SD-kaart geplaatst"
#define UI_TEXT_PRINTER_READY_NL "Printer klaar."
// Printtime output gets aggregated like <Days_5gisgits>UI_TEXT_PRINTTIME_DAYS<Hours>UI_TEXT_PRINTTIME_HOURS<Minutes>UI_TEXT_PRINTTIME_MINUTES
// ___88 days 12:45
#define UI_TEXT_PRINTTIME_DAYS_NL " dagen "
#define UI_TEXT_PRINTTIME_HOURS_NL ":"
#define UI_TEXT_PRINTTIME_MINUTES_NL ""
#define UI_TEXT_PRINT_TIME_NL "Printing tijd"
#define UI_TEXT_PRINT_FILAMENT_NL "Filament gedrukt"
#define UI_TEXT_PRINTED_NL "gedrukt"
#define UI_TEXT_POWER_NL "ATX power aan/uit"
#define UI_TEXT_STRING_HM_DEADTIME_NL "Dode tijd"
#define UI_TEXT_STRING_HM_SLOWBANG_NL "SlowBang"
#define UI_TEXT_STOP_PRINT_NL "Stop Print"
#define UI_TEXT_Z_BABYSTEPPING_NL "Z Babystep.:%oYmm"
#define UI_TEXT_CHANGE_FILAMENT_NL "Ruil filament"
#define UI_TEXT_WIZ_CH_FILAMENT1_NL "Ruil filament:"
#define UI_TEXT_WIZ_CH_FILAMENT2_NL "Draaien voor"
#define UI_TEXT_WIZ_CH_FILAMENT3_NL "filament op/omlaag"
#define UI_TEXT_CLICK_DONE_NL "Verder met klik"
#define UI_TEXT_AUTOLEVEL_ONOFF_NL "Autolevel: %ll"
#define UI_TEXT_SERVOPOS_NL "Servo-pos.: %oS"
#define UI_TEXT_IGNORE_M106_NL "Negeer M106 %Fi"
#define UI_TEXT_WIZ_REHEAT1_NL "Klik om extruder"
#define UI_TEXT_WIZ_REHEAT2_NL "verwarmen."
#define UI_TEXT_WIZ_WAITTEMP1_NL "Wachten op"
#define UI_TEXT_WIZ_WAITTEMP2_NL "doeltemperatuur..."
#define UI_TEXT_EXTRUDER_JAM_NL "Extruder jam"
#define UI_TEXT_STANDBY_NL "Standby"
#define UI_TEXT_BED_COATING_NL "Bed bedekking"
#define UI_TEXT_BED_COATING_SET1_NL "Bed bedekking set to"
#define UI_TEXT_BED_COATING_SET2_NL ""
#define UI_TEXT_NOCOATING_NL "Geen bedekking"
#define UI_TEXT_BUILDTAK_NL "BuildTak"
#define UI_TEXT_KAPTON_NL "Kapton"
#define UI_TEXT_BLUETAPE_NL "Blauw afplakband"
#define UI_TEXT_PETTAPE_NL "Groene PET Tape"
#define UI_TEXT_GLUESTICK_NL "Lijmstift"
#define UI_TEXT_CUSTOM_NL "Custom"
#define UI_TEXT_COATING_CUSTOM_NL "Custom:%BCmm"
#define UI_TEXT_LANGUAGE_NL "Taal"
#if NUM_EXTRUDER > 2 || MIXING_EXTRUDER != 0
#define UI_TEXT_MAINPAGE6_1_NL "\xa %ec/%Ec\xb0 X:%x0"
#else
#define UI_TEXT_MAINPAGE6_1_NL "\xa %e0/%E0\xb0 X:%x0"
#endif // NUM_EXTRUDER
#if NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_2_NL "\xa %e1/%E1\xb0 Y:%x1"
#elif HAVE_HEATED_BED
#define UI_TEXT_MAINPAGE6_2_NL "\xe %eb/%Eb\xb0 Y:%x1"
#else
#define UI_TEXT_MAINPAGE6_2_NL " Y:%x1"
#endif
#if HAVE_HEATED_BED && NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_3_NL "\xe %eb/%Eb\xb0 Z:%x2"
#elif FEATURE_DITTO_PRINTING
#define UI_TEXT_MAINPAGE6_3_NL "Kopieen: %ed Z:%x2"
#else
#define UI_TEXT_MAINPAGE6_3_NL "Flow:\xfd %of%%% Z:%x2"
#endif
#define UI_TEXT_MAINPAGE6_4_NL "Mul: %om%%% \xfd E: %x4m"
#define UI_TEXT_MAINPAGE6_5_NL "Buf: %oB"
#define UI_TEXT_MAINPAGE6_6_NL "%os"
#define UI_TEXT_MAINPAGE_TEMP_BED_NL cTEMP "%ec/%Ec" cDEG "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_BED_NL "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_Z_BUF_NL "Z:%x2 Buf : %oB"
#define UI_TEXT_MAINPAGE_MUL_EUSAGE_NL "Mul: %om E:%x4"
#define UI_TEXT_MAINPAGE_XY_NL "X:%x0 Y:%x1"
#define UI_TEXT_PRINT_TIME_VALUE_NL "%Ut"
#define UI_TEXT_PRINT_FILAMENT_VALUE_NL "%Uf m"
#define UI_TEXT_METER_PRINTED_NL "%Uf m " UI_TEXT_PRINTED_NL
#define UI_TEXT_STATUS_NL "%os"
#define UI_TEXT_EMPTY_NL ""
#define UI_TEXT_TEMP_SET_NL cTEMP "%ec/%Ec" cDEG
#define UI_TEXT_CURRENT_TEMP_NL cTEMP "%ec" cDEG
#define UI_TEXT_COATING_THICKNESS_NL " %BCmm"
#define UI_TEXT_EXTR3_TEMP_NL "Temp. 4 :%e3/%E3" cDEG "C"
#define UI_TEXT_EXTR4_TEMP_NL "Temp. 5 :%e4/%E4" cDEG "C"
#define UI_TEXT_EXTR5_TEMP_NL "Temp. 6 :%e5/%E5" cDEG "C"
#define UI_TEXT_EXTR3_OFF_NL "Extruder 4 Uit"
#define UI_TEXT_EXTR4_OFF_NL "Extruder 5 Uit"
#define UI_TEXT_EXTR5_OFF_NL "Extruder 6 Uit"
#define UI_TEXT_EXTR3_SELECT_NL "%X3 Select Extr. 4"
#define UI_TEXT_EXTR4_SELECT_NL "%X4 Select Extr. 5"
#define UI_TEXT_EXTR5_SELECT_NL "%X5 Select Extr. 6"
#define UI_TEXT_DITTO_0_NL "%D0 Geen Kopieen"
#define UI_TEXT_DITTO_1_NL "%D1 1 Kopie"
#define UI_TEXT_DITTO_2_NL "%D2 2 Kopieen"
#define UI_TEXT_DITTO_3_NL "%D3 3 Kopieen"
#define UI_TEXT_ZPROBE_HEIGHT_NL "z-probe hoogte:%zh"
#define UI_TEXT_OFFSETS_NL "Set print offsets"
#define UI_TEXT_X_OFFSET_NL "Set X offset:%T0mm"
#define UI_TEXT_Y_OFFSET_NL "Set Y offset:%T1mm"
#define UI_TEXT_Z_OFFSET_NL "Set Z offset:%T2mm"
// *************** Brazilian portuguese translation ****************
#define UI_TEXT_ON_PT "On"
#define UI_TEXT_OFF_PT "Off"
#define UI_TEXT_NA_PT "N/A" // Output for not available
#define UI_TEXT_YES_PT "Sim"
#define UI_TEXT_NO_PT "Não"
#define UI_TEXT_SEL_PT cSEL
#define UI_TEXT_NOSEL_PT cUNSEL
#define UI_TEXT_PRINT_POS_PT "Imprimindo..."
#define UI_TEXT_PRINTING_PT "Imprimindo"
#define UI_TEXT_IDLE_PT "Ocioso"
#define UI_TEXT_NOSDCARD_PT "Nenhum cartao SD"
#define UI_TEXT_ERROR_PT "**** ERRO ****"
#define UI_TEXT_BACK_PT "Voltar " cUP
#define UI_TEXT_QUICK_SETTINGS_PT "Configuracoes Rapidas"
#define UI_TEXT_ERRORMSG_PT "%oe"
#define UI_TEXT_CONFIGURATION_PT "Configuracao"
#define UI_TEXT_POSITION_PT "Posicao"
#define UI_TEXT_EXTRUDER_PT "Extrusor"
#define UI_TEXT_SD_CARD_PT "Cartao SD"
#define UI_TEXT_DEBUGGING_PT "Depuracao"
#define UI_TEXT_HOME_DELTA_PT "Home delta"
#define UI_TEXT_HOME_ALL_PT "Home todos"
#define UI_TEXT_HOME_X_PT "Home X"
#define UI_TEXT_HOME_Y_PT "Home Y"
#define UI_TEXT_HOME_Z_PT "Home Z"
#define UI_TEXT_PREHEAT_PLA_PT "Pre-aquecer PLA"
#define UI_TEXT_PREHEAT_ABS_PT "Pre-aquecer ABS"
#define UI_TEXT_LIGHTS_ONOFF_PT "Luzes:%lo"
#define UI_TEXT_COOLDOWN_PT "Resfriar"
#define UI_TEXT_SET_TO_ORIGIN_PT "Definir como origem"
#define UI_TEXT_DISABLE_STEPPER_PT "Desabilitar motor"
#define UI_TEXT_X_POSITION_PT "Posicao X"
#define UI_TEXT_X_POS_FAST_PT "Pos. Rapida X"
#define UI_TEXT_Y_POSITION_PT "Posicao Y"
#define UI_TEXT_Y_POS_FAST_PT "Pos. Rapida Y"
#define UI_TEXT_Z_POSITION_PT "Posicao Z"
#define UI_TEXT_Z_POS_FAST_PT "Pos. Rapida Z"
#define UI_TEXT_E_POSITION_PT "Posicao Extrusor"
#define UI_TEXT_BED_TEMP_PT "Tem.Cama:%eb/%Eb" cDEG "C"
#define UI_TEXT_EXTR0_TEMP_PT "Temp. 1 :%e0/%E0" cDEG "C"
#define UI_TEXT_EXTR1_TEMP_PT "Temp. 2 :%e1/%E1" cDEG "C"
#define UI_TEXT_EXTR2_TEMP_PT "Temp. 3 :%e2/%E2" cDEG "C"
#define UI_TEXT_EXTR0_OFF_PT "Extr. 1 Desligado"
#define UI_TEXT_EXTR1_OFF_PT "Extr. 2 Desligado"
#define UI_TEXT_EXTR2_OFF_PT "Extr. 3 Desligado"
#define UI_TEXT_EXTR0_SELECT_PT "%X0 Sel. Extr. 1"
#define UI_TEXT_EXTR1_SELECT_PT "%X1 Sel. Extr. 2"
#define UI_TEXT_EXTR2_SELECT_PT "%X2 Sel. Extr. 3"
#define UI_TEXT_EXTR_ORIGIN_PT "Definir Origem"
#define UI_TEXT_PRINT_X_PT "Imprimir X:%ax"
#define UI_TEXT_PRINT_Y_PT "Imprimir Y:%ay"
#define UI_TEXT_PRINT_Z_PT "Imprimir Z:%az"
#define UI_TEXT_PRINT_Z_DELTA_PT "Imprimir:%az"
#define UI_TEXT_MOVE_X_PT "Mover X:%aX"
#define UI_TEXT_MOVE_Y_PT "Mover Y:%aY"
#define UI_TEXT_MOVE_Z_PT "Mover Z:%aZ"
#define UI_TEXT_MOVE_Z_DELTA_PT "Mover:%aZ"
#define UI_TEXT_JERK_PT "Jerk:%aj"
#define UI_TEXT_ZJERK_PT "Z-Jerk:%aJ"
#define UI_TEXT_ACCELERATION_PT "Aceleracao"
#define UI_TEXT_STORE_TO_EEPROM_PT "Armazenar na EEPROM"
#define UI_TEXT_LOAD_EEPROM_PT "Carregar da EEPROM"
#define UI_TEXT_DBG_ECHO_PT "Echo :%do"
#define UI_TEXT_DBG_INFO_PT "Info :%di"
#define UI_TEXT_DBG_ERROR_PT "Erros :%de"
#define UI_TEXT_DBG_DRYRUN_PT "Dry run:%dd"
#define UI_TEXT_DBG_ENDSTOP_PT "EndStop:%dp"
#define UI_TEXT_OPS_OFF_PT "%O0 OPS Off"
#define UI_TEXT_OPS_CLASSIC_PT "%O1 OPS Classic"
#define UI_TEXT_OPS_FAST_PT "%O2 OPS Fast"
#define UI_TEXT_OPS_RETRACT_PT "Retract :%Or"
#define UI_TEXT_OPS_BACKSLASH_PT "Backsl. :%Ob"
#define UI_TEXT_OPS_MINDIST_PT "Min.dist:%Od"
#define UI_TEXT_OPS_MOVE_AFTER_PT "Move after:%Oa"
#define UI_TEXT_ANTI_OOZE_PT "Anti Ooze"
#define UI_TEXT_PRINT_FILE_PT "Imprimir arquivo"
#define UI_TEXT_PAUSE_PRINT_PT "Pausar Impressao"
#define UI_TEXT_CONTINUE_PRINT_PT "Continuar Impressao"
#define UI_TEXT_UNMOUNT_CARD_PT "Desmontar Cartao"
#define UI_TEXT_MOUNT_CARD_PT "Montar Cartao"
#define UI_TEXT_DELETE_FILE_PT "Deletar arquivo"
#define UI_TEXT_FEEDRATE_PT "Feedrate"
#define UI_TEXT_FEED_MAX_X_PT "Max X:%fx"
#define UI_TEXT_FEED_MAX_Y_PT "Max Y:%fy"
#define UI_TEXT_FEED_MAX_Z_PT "Max Z:%fz"
#define UI_TEXT_FEED_MAX_Z_DELTA_PT "Max:%fz"
#define UI_TEXT_FEED_HOME_X_PT "Home X:%fX"
#define UI_TEXT_FEED_HOME_Y_PT "Home Y:%fY"
#define UI_TEXT_FEED_HOME_Z_PT "Home Z:%fZ"
#define UI_TEXT_FEED_HOME_Z_DELTA_PT "Home:%fZ"
#define UI_TEXT_ACTION_XPOSITION4A_PT "X:%x0 mm %dx%dX"
#define UI_TEXT_ACTION_XPOSITION4B_PT "Min endstop:%sx"
#define UI_TEXT_ACTION_XPOSITION4C_PT "Max endstop:%sX"
#define UI_TEXT_ACTION_XPOSITION4D_PT ""
#define UI_TEXT_ACTION_YPOSITION4A_PT "Y:%x1 mm %dy%dY"
#define UI_TEXT_ACTION_YPOSITION4B_PT "Min endstop:%sy"
#define UI_TEXT_ACTION_YPOSITION4C_PT "Max endstop:%sY"
#define UI_TEXT_ACTION_YPOSITION4D_PT ""
#define UI_TEXT_ACTION_ZPOSITION4A_PT "Z:%x2 mm %dz%dZ"
#define UI_TEXT_ACTION_ZPOSITION4B_PT "Min endstop:%sz"
#define UI_TEXT_ACTION_ZPOSITION4C_PT "Max endstop:%sZ"
#define UI_TEXT_ACTION_ZPOSITION4D_PT ""
#define UI_TEXT_ACTION_XPOSITION_FAST4A_PT "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST4B_PT "Min endstop:%sx"
#define UI_TEXT_ACTION_XPOSITION_FAST4C_PT "Max endstop:%sX"
#define UI_TEXT_ACTION_XPOSITION_FAST4D_PT ""
#define UI_TEXT_ACTION_YPOSITION_FAST4A_PT "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST4B_PT "Min endstop:%sy"
#define UI_TEXT_ACTION_YPOSITION_FAST4C_PT "Max endstop:%sY"
#define UI_TEXT_ACTION_YPOSITION_FAST4D_PT ""
#define UI_TEXT_ACTION_ZPOSITION_FAST4A_PT "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST4B_PT "Min endstop:%sz"
#define UI_TEXT_ACTION_ZPOSITION_FAST4C_PT "Max endstop:%sZ"
#define UI_TEXT_ACTION_ZPOSITION_FAST4D_PT ""
#define UI_TEXT_ACTION_EPOSITION_FAST2A_PT "E:%x3 mm"
#define UI_TEXT_ACTION_EPOSITION_FAST2B_PT "1 click = 1 mm"
#define UI_TEXT_ACTION_XPOSITION2A_PT "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION2B_PT "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION2A_PT "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION2B_PT "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION2A_PT "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION2B_PT "Min:%sz Max:%sZ"
#define UI_TEXT_ACTION_XPOSITION_FAST2A_PT "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST2B_PT "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION_FAST2A_PT "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST2B_PT "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION_FAST2A_PT "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST2B_PT "Min:%sz Max:%sZ"
#define UI_TEXT_FANSPEED_PT "Velocidade ventoinha"
#define UI_TEXT_ACTION_FANSPEED_PT "Vel. vent.:%Fs%%%"
#define UI_TEXT_FAN_OFF_PT "Desligar ventoinha"
#define UI_TEXT_FAN_25_PT "Def. ventoinha 25%%%"
#define UI_TEXT_FAN_50_PT "Def. ventoinha 50%%%"
#define UI_TEXT_FAN_75_PT "Def. ventoinha 75%%%"
#define UI_TEXT_FAN_FULL_PT "Def. ventoinha 100%%%"
#define UI_TEXT_STEPPER_INACTIVE_PT "Motor Inativo"
#define UI_TEXT_STEPPER_INACTIVE2A_PT "Des. Depois: %is"
#define UI_TEXT_STEPPER_INACTIVE2B_PT "[min] 0=Off"
#define UI_TEXT_POWER_INACTIVE_PT "Max. Inativo"
#define UI_TEXT_POWER_INACTIVE2A_PT "Des. Depois: %ip"
#define UI_TEXT_POWER_INACTIVE2B_PT "[min] 0=Off"
#define UI_TEXT_GENERAL_PT "Geral"
#define UI_TEXT_BAUDRATE_PT "Baudrate:%oc"
#define UI_TEXT_EXTR_STEPS_PT "Passos/mm:%Se"
#define UI_TEXT_EXTR_START_FEED_PT "Iniciar FR:%Xf"
#define UI_TEXT_EXTR_MAX_FEED_PT "Max FR:%XF"
#define UI_TEXT_EXTR_ACCEL_PT "Accel:%XA"
#define UI_TEXT_EXTR_WATCH_PT "Stab.Time:%Xw"
#define UI_TEXT_EXTR_ADVANCE_L_PT "Advance lin:%Xl"
#define UI_TEXT_EXTR_ADVANCE_K_PT "Advance quad:%Xa"
#define UI_TEXT_EXTR_MANAGER_PT "Controle:%Xh"
#define UI_TEXT_EXTR_PGAIN_PT "PID P:%Xp"
#define UI_TEXT_EXTR_DEADTIME_PT "Tempo morto:%Xp"
#define UI_TEXT_EXTR_DMAX_DT_PT "Controle PWM:%XM"
#define UI_TEXT_EXTR_IGAIN_PT "PID I:%Xi"
#define UI_TEXT_EXTR_DGAIN_PT "PID D:%Xd"
#define UI_TEXT_EXTR_DMIN_PT "Drive Min:%Xm"
#define UI_TEXT_EXTR_DMAX_PT "Drive Max:%XM"
#define UI_TEXT_EXTR_PMAX_PT "PID Max:%XD"
#define UI_TEXT_EXTR_XOFF_PT "Offset X:%Xx"
#define UI_TEXT_EXTR_YOFF_PT "Offset Y:%Xy"
#define UI_TEXT_STRING_HM_BANGBANG_PT "BangBang"
#define UI_TEXT_STRING_HM_PID_PT "PID"
#define UI_TEXT_STRING_ACTION_PT "Acao:%la"
#define UI_TEXT_HEATING_EXTRUDER_PT "Aquecendo Extrusor"
#define UI_TEXT_HEATING_BED_PT "Aquecendo Cama"
#define UI_TEXT_KILLED_PT "Killed"
#define UI_TEXT_STEPPER_DISABLED_PT "Motor Desabilitado"
#define UI_TEXT_EEPROM_STOREDA_PT "Configuracao"
#define UI_TEXT_EEPROM_STOREDB_PT "armazenada na EEPROM"
#define UI_TEXT_EEPROM_LOADEDA_PT "Configuracao"
#define UI_TEXT_EEPROM_LOADEDB_PT "carregada da EEPROM"
#define UI_TEXT_UPLOADING_PT "Enviando..."
#define UI_TEXT_PAGE_BUFFER_PT "Buffer:%oB"
#define UI_TEXT_PAGE_EXTRUDER_PT " E:%ec/%Ec" cDEG "C" cARROW "%oC"
#define UI_TEXT_PAGE_EXTRUDER1_PT "E1:%e0/%E0" cDEG "C" cARROW "%o0"
#define UI_TEXT_PAGE_EXTRUDER2_PT "E2:%e1/%E1" cDEG "C" cARROW "%o1"
#define UI_TEXT_PAGE_EXTRUDER3_PT "E3:%e2/%E2" cDEG "C" cARROW "%o2"
#define UI_TEXT_PAGE_BED_PT " B:%eb/%Eb" cDEG "C" cARROW "%ob"
#define UI_TEXT_SPEED_MULTIPLY_PT "Mult. Veloc.:%om%%%"
#define UI_TEXT_FLOW_MULTIPLY_PT "Mult. Fluxo:%of%%%"
#define UI_TEXT_SHOW_MEASUREMENT_PT "Mostrar medicao"
#define UI_TEXT_RESET_MEASUREMENT_PT "Reset medicao"
#define UI_TEXT_SET_MEASURED_ORIGIN_PT "Set Z=0"
#define UI_TEXT_ZCALIB_PT "Z calib."
#define UI_TEXT_SET_P1_PT "Set P1"
#define UI_TEXT_SET_P2_PT "Set P2"
#define UI_TEXT_SET_P3_PT "Set P3"
#define UI_TEXT_CALCULATE_LEVELING_PT "Calcule nivelamento"
#define UI_TEXT_LEVEL_PT "Nivel delta"
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP_PT "Aguardar Temp.%XT" cDEG "C"
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS_PT "Aguardar Unidades:%XUmm"
#define UI_TEXT_SD_REMOVED_PT "Cartao SD removido"
#define UI_TEXT_SD_INSERTED_PT "Cartao SD inserido"
#define UI_TEXT_PRINTER_READY_PT "Impressora pronta."
// Printtime output gets aggregated like <Days_5gisgits>UI_TEXT_PRINTTIME_DAYS<Hours>UI_TEXT_PRINTTIME_HOURS<Minutes>UI_TEXT_PRINTTIME_MINUTES
// ___88 days 12:45
#define UI_TEXT_PRINTTIME_DAYS_PT " dias "
#define UI_TEXT_PRINTTIME_HOURS_PT ":"
#define UI_TEXT_PRINTTIME_MINUTES_PT ""
#define UI_TEXT_PRINT_TIME_PT "tempo de impressao"
#define UI_TEXT_PRINT_FILAMENT_PT "Filament impresso"
#define UI_TEXT_PRINTED_PT "impresso"
#define UI_TEXT_POWER_PT "ATX poder on/off"
#define UI_TEXT_STRING_HM_DEADTIME_PT "Tempo morto"
#define UI_TEXT_STRING_HM_SLOWBANG_PT "SlowBang"
#define UI_TEXT_STOP_PRINT_PT "Parar impressao"
#define UI_TEXT_Z_BABYSTEPPING_PT "Z babystep.:%oYmm"
#define UI_TEXT_CHANGE_FILAMENT_PT "Alterar filamento"
#define UI_TEXT_WIZ_CH_FILAMENT1_PT "Alterar filamento"
#define UI_TEXT_WIZ_CH_FILAMENT2_PT "Gire para mover"
#define UI_TEXT_WIZ_CH_FILAMENT3_PT "filamento cima/baixo"
#define UI_TEXT_CLICK_DONE_PT "Clique quando feito"
#define UI_TEXT_AUTOLEVEL_ONOFF_PT "Nivel auto: %ll"
#define UI_TEXT_SERVOPOS_PT "Pos. servo: %oS"
#define UI_TEXT_IGNORE_M106_PT "Ignorar M106 %Fi"
#define UI_TEXT_WIZ_REHEAT1_PT "Clique para"
#define UI_TEXT_WIZ_REHEAT2_PT "aquecer extrusora."
#define UI_TEXT_WIZ_WAITTEMP1_PT "Aguardando a"
#define UI_TEXT_WIZ_WAITTEMP2_PT "temperatura alvo ..."
#define UI_TEXT_EXTRUDER_JAM_PT "Extrusora congest."
#define UI_TEXT_STANDBY_PT "Standby"
#define UI_TEXT_BED_COATING_PT "Revest. de leito"
#define UI_TEXT_BED_COATING_SET1_PT "Revest. de leito:"
#define UI_TEXT_BED_COATING_SET2_PT ""
#define UI_TEXT_NOCOATING_PT "Sem revestimento"
#define UI_TEXT_BUILDTAK_PT "BuildTak"
#define UI_TEXT_KAPTON_PT "Kapton"
#define UI_TEXT_BLUETAPE_PT "Fita crepe azul"
#define UI_TEXT_PETTAPE_PT "Fita verde PET"
#define UI_TEXT_GLUESTICK_PT "Cola bastao"
#define UI_TEXT_CUSTOM_PT "Personalizadas"
#define UI_TEXT_COATING_CUSTOM_PT "Person.:%BCmm"
#define UI_TEXT_LANGUAGE_PT "Idioma"
#if NUM_EXTRUDER > 2 || MIXING_EXTRUDER != 0
#define UI_TEXT_MAINPAGE6_1_PT "\xa %ec/%Ec\xb0 X:%x0"
#else
#define UI_TEXT_MAINPAGE6_1_PT "\xa %e0/%E0\xb0 X:%x0"
#endif // NUM_EXTRUDER
#if NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_2_PT "\xa %e1/%E1\xb0 Y:%x1"
#elif HAVE_HEATED_BED
#define UI_TEXT_MAINPAGE6_2_PT "\xe %eb/%Eb\xb0 Y:%x1"
#else
#define UI_TEXT_MAINPAGE6_2_PT " Y:%x1"
#endif
#if HAVE_HEATED_BED && NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_3_PT "\xe %eb/%Eb\xb0 Z:%x2"
#elif FEATURE_DITTO_PRINTING
#define UI_TEXT_MAINPAGE6_3_PT "Copias: %ed Z:%x2"
#else
#define UI_TEXT_MAINPAGE6_3_PT "Fluxo:\xfd %of%%% Z:%x2"
#endif
#define UI_TEXT_MAINPAGE6_4_PT "Mul: %om%%% \xfd E: %x4m"
#define UI_TEXT_MAINPAGE6_5_PT "Buf: %oB"
#define UI_TEXT_MAINPAGE6_6_PT "%os"
#define UI_TEXT_MAINPAGE_TEMP_BED_PT cTEMP "%ec/%Ec" cDEG "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_BED_PT "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_Z_BUF_PT "Z:%x2 Buf : %oB"
#define UI_TEXT_MAINPAGE_MUL_EUSAGE_PT "Mul: %om E:%x4"
#define UI_TEXT_MAINPAGE_XY_PT "X:%x0 Y:%x1"
#define UI_TEXT_PRINT_TIME_VALUE_PT "%Ut"
#define UI_TEXT_PRINT_FILAMENT_VALUE_PT "%Uf m"
#define UI_TEXT_METER_PRINTED_PT "%Uf m " UI_TEXT_PRINTED_EN
#define UI_TEXT_STATUS_PT "%os"
#define UI_TEXT_EMPTY_PT ""
#define UI_TEXT_TEMP_SET_PT cTEMP "%ec/%Ec" cDEG
#define UI_TEXT_CURRENT_TEMP_PT cTEMP "%ec" cDEG
#define UI_TEXT_COATING_THICKNESS_PT " %BCmm"
#define UI_TEXT_EXTR3_TEMP_PT "Temp. 4 :%e3/%E3" cDEG "C"
#define UI_TEXT_EXTR4_TEMP_PT "Temp. 5 :%e4/%E4" cDEG "C"
#define UI_TEXT_EXTR5_TEMP_PT "Temp. 6 :%e5/%E5" cDEG "C"
#define UI_TEXT_EXTR3_OFF_PT "Extr. 4 Desligado"
#define UI_TEXT_EXTR4_OFF_PT "Extr. 5 Desligado"
#define UI_TEXT_EXTR5_OFF_PT "Extr. 6 Desligado"
#define UI_TEXT_EXTR3_SELECT_PT "%X3 Sel. Extr. 4"
#define UI_TEXT_EXTR4_SELECT_PT "%X4 Sel. Extr. 5"
#define UI_TEXT_EXTR5_SELECT_PT "%X5 Sel. Extr. 6"
#define UI_TEXT_DITTO_0_PT "%D0 Nenhuma Copia"
#define UI_TEXT_DITTO_1_PT "%D1 1 Copia"
#define UI_TEXT_DITTO_2_PT "%D2 2 Copias"
#define UI_TEXT_DITTO_3_PT "%D3 3 Copias"
#define UI_TEXT_ZPROBE_HEIGHT_PT "Altura Z-Probe:%zh"
#define UI_TEXT_OFFSETS_PT "Set print offsets"
#define UI_TEXT_X_OFFSET_PT "Set X offset:%T0mm"
#define UI_TEXT_Y_OFFSET_PT "Set Y offset:%T1mm"
#define UI_TEXT_Z_OFFSET_PT "Set Z offset:%T2mm"
// *************** Italian translation ****************
#define UI_TEXT_ON_IT "On"
#define UI_TEXT_OFF_IT "Off"
#define UI_TEXT_NA_IT "N/A" // Output for not available
#define UI_TEXT_YES_IT "Si"
#define UI_TEXT_NO_IT "No"
#define UI_TEXT_PRINT_POS_IT "Stampa..."
#define UI_TEXT_PRINTING_IT "Stampa"
#define UI_TEXT_IDLE_IT "Pausa"
#define UI_TEXT_NOSDCARD_IT "No Scheda SD"
#define UI_TEXT_ERROR_IT "**** ERRORE ****"
#define UI_TEXT_BACK_IT "Indietro " cUP
#define UI_TEXT_QUICK_SETTINGS_IT "Impostazioni veloci"
#define UI_TEXT_ERRORMSG_IT "%oe"
#define UI_TEXT_CONFIGURATION_IT "Configurazione"
#define UI_TEXT_POSITION_IT "Posizione"
#define UI_TEXT_EXTRUDER_IT "Estrusore"
#define UI_TEXT_SD_CARD_IT "Scheda SD"
#define UI_TEXT_DEBUGGING_IT "Sviluppo"
#define UI_TEXT_HOME_DELTA_IT "Origine Delta"
#define UI_TEXT_HOME_ALL_IT "Origine Tutti"
#define UI_TEXT_HOME_X_IT "Origine X"
#define UI_TEXT_HOME_Y_IT "Origine Y"
#define UI_TEXT_HOME_Z_IT "Origine Z"
#define UI_TEXT_PREHEAT_PLA_IT "Presicaldamento PLA"
#define UI_TEXT_PREHEAT_ABS_IT "Presicaldamento ABS"
#define UI_TEXT_LIGHTS_ONOFF_IT "Luci:%lo"
#define UI_TEXT_COOLDOWN_IT "Raffreddamento"
#define UI_TEXT_SET_TO_ORIGIN_IT "Imposta come Origine"
#define UI_TEXT_DISABLE_STEPPER_IT "Disabilita Stepper"
#define UI_TEXT_X_POSITION_IT "Posizione X"
#define UI_TEXT_X_POS_FAST_IT "Pos. X Veloce"
#define UI_TEXT_Y_POSITION_IT "Posizione Y"
#define UI_TEXT_Y_POS_FAST_IT "Pos. Y Veloce"
#define UI_TEXT_Z_POSITION_IT "Posizione Z"
#define UI_TEXT_Z_POS_FAST_IT "Pos. Z Veloce"
#define UI_TEXT_E_POSITION_IT "Posizione Estrusore"
#define UI_TEXT_BED_TEMP_IT "Temp.Piatto:%Eb" cDEG "C"
#define UI_TEXT_EXTR0_TEMP_IT "Temp. 1 :%e0/%E0" cDEG "C"
#define UI_TEXT_EXTR1_TEMP_IT "Temp. 2 :%e1/%E1" cDEG "C"
#define UI_TEXT_EXTR2_TEMP_IT "Temp. 3 :%e2/%E2" cDEG "C"
#define UI_TEXT_EXTR0_OFF_IT "Estrusore 1 Spento"
#define UI_TEXT_EXTR1_OFF_IT "Estrusore 2 Spento"
#define UI_TEXT_EXTR2_OFF_IT "Estrusore 3 Spento"
#define UI_TEXT_EXTR0_SELECT_IT "%X0 Seleziona Estr. 1"
#define UI_TEXT_EXTR1_SELECT_IT "%X1 Seleziona Estr. 2"
#define UI_TEXT_EXTR2_SELECT_IT "%X2 Seleziona Estr. 3"
#define UI_TEXT_EXTR_ORIGIN_IT "Imposta Origine"
#define UI_TEXT_PRINT_X_IT "Stampa X:%ax"
#define UI_TEXT_PRINT_Y_IT "Stampa Y:%ay"
#define UI_TEXT_PRINT_Z_IT "Stampa Z:%az"
#define UI_TEXT_PRINT_Z_DELTA_IT "Stampa:%az"
#define UI_TEXT_MOVE_X_IT "Movimento X:%aX"
#define UI_TEXT_MOVE_Y_IT "Movimento Y:%aY"
#define UI_TEXT_MOVE_Z_IT "Movimento Z:%aZ"
#define UI_TEXT_MOVE_Z_DELTA_IT "Movimento:%aZ"
#define UI_TEXT_JERK_IT "Scatto:%aj"
#define UI_TEXT_ZJERK_IT "Scatto-Z:%aJ"
#define UI_TEXT_ACCELERATION_IT "Accelerazione"
#define UI_TEXT_STORE_TO_EEPROM_IT "Salva in EEPROM"
#define UI_TEXT_LOAD_EEPROM_IT "Carica da EEPROM"
#define UI_TEXT_DBG_ECHO_IT "Eco :%do"
#define UI_TEXT_DBG_INFO_IT "Info :%di"
#define UI_TEXT_DBG_ERROR_IT "Errori :%de"
#define UI_TEXT_DBG_DRYRUN_IT "Simulazione:%dd"
#define UI_TEXT_DBG_ENDSTOP_IT "EndStop:%dp"
#define UI_TEXT_OPS_OFF_IT "%O0 OPS Spento"
#define UI_TEXT_OPS_CLASSIC_IT "%O1 OPS Classico"
#define UI_TEXT_OPS_FAST_IT "%O2 OPS Veloce"
#define UI_TEXT_OPS_RETRACT_IT "Ritiro :%Or"
#define UI_TEXT_OPS_BACKSLASH_IT "Gioco barra:%Ob"
#define UI_TEXT_OPS_MINDIST_IT "Distanza Min.:%Od"
#define UI_TEXT_OPS_MOVE_AFTER_IT "Movimento dopo:%Oa"
#define UI_TEXT_ANTI_OOZE_IT "Anti goccia"
#define UI_TEXT_PRINT_FILE_IT "Stampa file"
#define UI_TEXT_PAUSE_PRINT_IT "Pausa Stampa"
#define UI_TEXT_CONTINUE_PRINT_IT "Continua Stampa"
#define UI_TEXT_UNMOUNT_CARD_IT "Scarica Scheda"
#define UI_TEXT_MOUNT_CARD_IT "Carica Scheda"
#define UI_TEXT_DELETE_FILE_IT "Cancella file"
#define UI_TEXT_FEEDRATE_IT "Velocita'"
#define UI_TEXT_FEED_MAX_X_IT "Massimo X:%fx"
#define UI_TEXT_FEED_MAX_Y_IT "Massimo Y:%fy"
#define UI_TEXT_FEED_MAX_Z_IT "Massimo Z:%fz"
#define UI_TEXT_FEED_MAX_Z_DELTA_IT "Massimo:%fz"
#define UI_TEXT_FEED_HOME_X_IT "Origine X:%fX"
#define UI_TEXT_FEED_HOME_Y_IT "Origine Y:%fY"
#define UI_TEXT_FEED_HOME_Z_IT "Origine Z:%fZ"
#define UI_TEXT_FEED_HOME_Z_DELTA_IT "Origine:%fZ"
#define UI_TEXT_ACTION_XPOSITION4A_IT "X:%x0 mm %dx%dX"
#define UI_TEXT_ACTION_XPOSITION4B_IT "Min finec.:%sx"
#define UI_TEXT_ACTION_XPOSITION4C_IT "Max finec.:%sX"
#define UI_TEXT_ACTION_XPOSITION4D_IT ""
#define UI_TEXT_ACTION_YPOSITION4A_IT "Y:%x1 mm %dy%dY"
#define UI_TEXT_ACTION_YPOSITION4B_IT "Min finec.:%sy"
#define UI_TEXT_ACTION_YPOSITION4C_IT "Max finec.:%sY"
#define UI_TEXT_ACTION_YPOSITION4D_IT ""
#define UI_TEXT_ACTION_ZPOSITION4A_IT "Z:%x2 mm %dz%dZ"
#define UI_TEXT_ACTION_ZPOSITION4B_IT "Min finec.:%sz"
#define UI_TEXT_ACTION_ZPOSITION4C_IT "Max finec.:%sZ"
#define UI_TEXT_ACTION_ZPOSITION4D_IT ""
#define UI_TEXT_ACTION_XPOSITION_FAST4A_IT "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST4B_IT "Min finec.:%sx"
#define UI_TEXT_ACTION_XPOSITION_FAST4C_IT "Max finec.:%sX"
#define UI_TEXT_ACTION_XPOSITION_FAST4D_IT ""
#define UI_TEXT_ACTION_YPOSITION_FAST4A_IT "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST4B_IT "Min finec.:%sy"
#define UI_TEXT_ACTION_YPOSITION_FAST4C_IT "Max finec.:%sY"
#define UI_TEXT_ACTION_YPOSITION_FAST4D_IT ""
#define UI_TEXT_ACTION_ZPOSITION_FAST4A_IT "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST4B_IT "Min finec.:%sz"
#define UI_TEXT_ACTION_ZPOSITION_FAST4C_IT "Max finec.:%sZ"
#define UI_TEXT_ACTION_ZPOSITION_FAST4D_IT ""
#define UI_TEXT_ACTION_EPOSITION_FAST2A_IT "E:%x3 mm"
#define UI_TEXT_ACTION_EPOSITION_FAST2B_IT "1 scatto = 1 mm"
#define UI_TEXT_ACTION_XPOSITION2A_IT "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION2B_IT "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION2A_IT "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION2B_IT "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION2A_IT "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION2B_IT "Min:%sz Max:%sZ"
#define UI_TEXT_ACTION_XPOSITION_FAST2A_IT "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST2B_IT "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION_FAST2A_IT "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST2B_IT "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION_FAST2A_IT "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST2B_IT "Min:%sz Max:%sZ"
#define UI_TEXT_FANSPEED_IT "Velocita Ventola"
#define UI_TEXT_ACTION_FANSPEED_IT "Vel. Ventola:%Fs%%%"
#define UI_TEXT_FAN_OFF_IT "Spegnimento Ventola"
#define UI_TEXT_FAN_25_IT "Ventola al 25%%%"
#define UI_TEXT_FAN_50_IT "Ventola al%%%"
#define UI_TEXT_FAN_75_IT "Ventola al%%%"
#define UI_TEXT_FAN_FULL_IT "Ventola al massimo"
#define UI_TEXT_STEPPER_INACTIVE_IT "Stepper Inattivi"
#define UI_TEXT_STEPPER_INACTIVE2A_IT "Dis. dopo: %is"
#define UI_TEXT_STEPPER_INACTIVE2B_IT "[min] 0=Off"
#define UI_TEXT_POWER_INACTIVE_IT "Max. Inattivita'"
#define UI_TEXT_POWER_INACTIVE2A_IT "Dis. After: %ip"
#define UI_TEXT_POWER_INACTIVE2B_IT "[min] 0=Off"
#define UI_TEXT_GENERAL_IT "Generale"
#define UI_TEXT_BAUDRATE_IT "Baudrate:%oc"
#define UI_TEXT_EXTR_STEPS_IT "Passi/mm:%Se"
#define UI_TEXT_EXTR_START_FEED_IT "Velocita' Avvio:%Xf"
#define UI_TEXT_EXTR_MAX_FEED_IT "Velocita' Max:%XF"
#define UI_TEXT_EXTR_ACCEL_IT "Accel:%XA"
#define UI_TEXT_EXTR_WATCH_IT "Tempo Stab.:%Xw"
#define UI_TEXT_EXTR_ADVANCE_L_IT "Avanzamento lin:%Xl"
#define UI_TEXT_EXTR_ADVANCE_K_IT "Avanzamento espon:%Xa"
#define UI_TEXT_EXTR_MANAGER_IT "Controllo:%Xh"
#define UI_TEXT_EXTR_PGAIN_IT "PID P:%Xp"
#define UI_TEXT_EXTR_DEADTIME_IT "Tempo morto:%Xp"
#define UI_TEXT_EXTR_DMAX_DT_IT "Controllo PWM:%XM"
#define UI_TEXT_EXTR_IGAIN_IT "PID I:%Xi"
#define UI_TEXT_EXTR_DGAIN_IT "PID D:%Xd"
#define UI_TEXT_EXTR_DMIN_IT "Drive Min:%Xm"
#define UI_TEXT_EXTR_DMAX_IT "Drive Max:%XM"
#define UI_TEXT_EXTR_PMAX_IT "PID Max:%XD"
#define UI_TEXT_EXTR_XOFF_IT "X-Offset:%Xx"
#define UI_TEXT_EXTR_YOFF_IT "Y-Offset:%Xy"
#define UI_TEXT_STRING_HM_BANGBANG_IT "BangBang"
#define UI_TEXT_STRING_HM_PID_IT "PID"
#define UI_TEXT_STRING_ACTION_IT "Azione:%la"
#define UI_TEXT_HEATING_EXTRUDER_IT "Riscald. Estrusore"
#define UI_TEXT_HEATING_BED_IT "Riscald. Piatto"
#define UI_TEXT_KILLED_IT "Abortito"
#define UI_TEXT_STEPPER_DISABLED_IT "Stepper Disabilitato"
#define UI_TEXT_EEPROM_STOREDA_IT "Configurazione"
#define UI_TEXT_EEPROM_STOREDB_IT "Salvata in EEPROM"
#define UI_TEXT_EEPROM_LOADEDA_IT "Configurazione"
#define UI_TEXT_EEPROM_LOADEDB_IT "Caricata da EEPROM"
#define UI_TEXT_UPLOADING_IT "Caricamento..."
#define UI_TEXT_PAGE_BUFFER_IT "Tampone:%oB"
#define UI_TEXT_PAGE_EXTRUDER_IT " E:%ec/%Ec" cDEG "C" cARROW "%oC"
#define UI_TEXT_PAGE_EXTRUDER1_IT "E1:%e0/%E0" cDEG "C" cARROW "%o0"
#define UI_TEXT_PAGE_EXTRUDER2_IT "E2:%e1/%E1" cDEG "C" cARROW "%o1"
#define UI_TEXT_PAGE_EXTRUDER3_IT "E3:%e2/%E2" cDEG "C" cARROW "%o2"
#define UI_TEXT_PAGE_BED_IT " B:%eb/%Eb" cDEG "C" cARROW "%ob"
#define UI_TEXT_SPEED_MULTIPLY_IT "Molt. Velocita':%om%%%"
#define UI_TEXT_FLOW_MULTIPLY_IT "Molt. Flusso:%of%%%"
#define UI_TEXT_SHOW_MEASUREMENT_IT "Mostra di misura"
#define UI_TEXT_RESET_MEASUREMENT_IT "Ripristino di misura"
#define UI_TEXT_SET_MEASURED_ORIGIN_IT "Set Z=0"
#define UI_TEXT_ZCALIB_IT "Z Calib."
#define UI_TEXT_SET_P1_IT "Impostato P1"
#define UI_TEXT_SET_P2_IT "Impostato P2"
#define UI_TEXT_SET_P3_IT "Impostato P3"
#define UI_TEXT_CALCULATE_LEVELING_IT "Calcol. livellamento"
#define UI_TEXT_LEVEL_IT "Livello delta"
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP_IT "Attesa Temp.%XT" cDEG "C"
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS_IT "Attesa Unita':%XUmm"
#define UI_TEXT_SD_REMOVED_IT "SD Card rimosso"
#define UI_TEXT_SD_INSERTED_IT "SD Card inserita"
#define UI_TEXT_PRINTER_READY_IT "Stampante pronta."
// Printtime output gets aggregated like <Days_5gisgits>UI_TEXT_PRINTTIME_DAYS<Hours>UI_TEXT_PRINTTIME_HOURS<Minutes>UI_TEXT_PRINTTIME_MINUTES
// ___88 days 12:45
#define UI_TEXT_PRINTTIME_DAYS_IT " giorni "
#define UI_TEXT_PRINTTIME_HOURS_IT ":"
#define UI_TEXT_PRINTTIME_MINUTES_IT ""
#define UI_TEXT_PRINT_TIME_IT "Tempo di stampa"
#define UI_TEXT_PRINT_FILAMENT_IT "Filament stampata"
#define UI_TEXT_PRINTED_IT "stampato"
#define UI_TEXT_POWER_IT "ATX on/off"
#define UI_TEXT_STRING_HM_DEADTIME_IT "Tempo morto"
#define UI_TEXT_STRING_HM_SLOWBANG_IT "SlowBang"
#define UI_TEXT_STOP_PRINT_IT "Arresto Stampa"
#define UI_TEXT_Z_BABYSTEPPING_IT "Z Babystep.:%oYmm"
#define UI_TEXT_CHANGE_FILAMENT_IT "Cambia filamento"
#define UI_TEXT_WIZ_CH_FILAMENT1_IT "Cambia filamento"
#define UI_TEXT_WIZ_CH_FILAMENT2_IT "Ruotare per spostare"
#define UI_TEXT_WIZ_CH_FILAMENT3_IT "filamento su/giu"
#define UI_TEXT_CLICK_DONE_IT "Clicca quando fatto"
#define UI_TEXT_AUTOLEVEL_ONOFF_IT "Autoliv.: %ll"
#define UI_TEXT_SERVOPOS_IT "Pos. servo: %oS"
#define UI_TEXT_IGNORE_M106_IT "Ignora M106 cmd %Fi"
#define UI_TEXT_WIZ_REHEAT1_IT "Clicca per"
#define UI_TEXT_WIZ_REHEAT2_IT "riscaldare estrusori"
#define UI_TEXT_WIZ_WAITTEMP1_IT "Attendere che temp."
#define UI_TEXT_WIZ_WAITTEMP2_IT "di destinazione ..."
#define UI_TEXT_EXTRUDER_JAM_IT "Stoccaggio estrusore"
#define UI_TEXT_STANDBY_IT "Stand-by"
#define UI_TEXT_BED_COATING_IT "Rivestimento letto"
#define UI_TEXT_BED_COATING_SET1_IT "Rivestimento letto:"
#define UI_TEXT_BED_COATING_SET2_IT ""
#define UI_TEXT_NOCOATING_IT "Non rivestito"
#define UI_TEXT_BUILDTAK_IT "BuildTak"
#define UI_TEXT_KAPTON_IT "Kapton"
#define UI_TEXT_BLUETAPE_IT "Blu nastro adesivo"
#define UI_TEXT_PETTAPE_IT "Verde PET nastro"
#define UI_TEXT_GLUESTICK_IT "Colla stick"
#define UI_TEXT_CUSTOM_IT "Usanza"
#define UI_TEXT_COATING_CUSTOM_IT "Usanza:%BCmm"
#define UI_TEXT_LANGUAGE_IT "Lingua"
#if NUM_EXTRUDER > 2 || MIXING_EXTRUDER != 0
#define UI_TEXT_MAINPAGE6_1_IT "\xa %ec/%Ec\xb0 X:%x0"
#else
#define UI_TEXT_MAINPAGE6_1_IT "\xa %e0/%E0\xb0 X:%x0"
#endif // NUM_EXTRUDER
#if NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_2_IT "\xa %e1/%E1\xb0 Y:%x1"
#elif HAVE_HEATED_BED
#define UI_TEXT_MAINPAGE6_2_IT "\xe %eb/%Eb\xb0 Y:%x1"
#else
#define UI_TEXT_MAINPAGE6_2_IT " Y:%x1"
#endif
#if HAVE_HEATED_BED && NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_3_IT "\xe %eb/%Eb\xb0 Z:%x2"
#elif FEATURE_DITTO_PRINTING
#define UI_TEXT_MAINPAGE6_3_IT "Copie: %ed Z:%x2"
#else
#define UI_TEXT_MAINPAGE6_3_IT "Flusso:\xfd %of%%% Z:%x2"
#endif
#define UI_TEXT_MAINPAGE6_4_IT "Mul: %om%%% \xfd E: %x4m"
#define UI_TEXT_MAINPAGE6_5_IT "Buf: %oB"
#define UI_TEXT_MAINPAGE6_6_IT "%os"
#define UI_TEXT_MAINPAGE_TEMP_BED_IT cTEMP "%ec/%Ec" cDEG "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_BED_IT "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_Z_BUF_IT "Z:%x2 Buf : %oB"
#define UI_TEXT_MAINPAGE_MUL_EUSAGE_IT "Mul: %om E:%x4"
#define UI_TEXT_MAINPAGE_XY_IT "X:%x0 Y:%x1"
#define UI_TEXT_PRINT_TIME_VALUE_IT "%Ut"
#define UI_TEXT_PRINT_FILAMENT_VALUE_IT "%Uf m"
#define UI_TEXT_METER_PRINTED_IT "%Uf m " UI_TEXT_PRINTED_IT
#define UI_TEXT_STATUS_IT "%os"
#define UI_TEXT_EMPTY_IT ""
#define UI_TEXT_TEMP_SET_IT cTEMP "%ec/%Ec" cDEG
#define UI_TEXT_CURRENT_TEMP_IT cTEMP "%ec" cDEG
#define UI_TEXT_COATING_THICKNESS_IT " %BCmm"
#define UI_TEXT_EXTR3_TEMP_IT "Temp. 4 :%e3/%E3" cDEG "C"
#define UI_TEXT_EXTR4_TEMP_IT "Temp. 5 :%e4/%E4" cDEG "C"
#define UI_TEXT_EXTR5_TEMP_IT "Temp. 6 :%e5/%E5" cDEG "C"
#define UI_TEXT_EXTR3_OFF_IT "Estrusore 4 Spento"
#define UI_TEXT_EXTR4_OFF_IT "Estrusore 5 Spento"
#define UI_TEXT_EXTR5_OFF_IT "Estrusore 6 Spento"
#define UI_TEXT_EXTR3_SELECT_IT "%X3 Seleziona Estr. 4"
#define UI_TEXT_EXTR4_SELECT_IT "%X4 Seleziona Estr. 5"
#define UI_TEXT_EXTR5_SELECT_IT "%X5 Seleziona Estr. 6"
#define UI_TEXT_DITTO_0_IT "%D0 Nessuna Copia"
#define UI_TEXT_DITTO_1_IT "%D1 1 Copia"
#define UI_TEXT_DITTO_2_IT "%D2 2 Copie"
#define UI_TEXT_DITTO_3_IT "%D3 3 Copie"
#define UI_TEXT_ZPROBE_HEIGHT_IT "Altezza Z-Probe:%zh"
#define UI_TEXT_OFFSETS_IT "Set print offsets"
#define UI_TEXT_X_OFFSET_IT "Set X offset:%T0mm"
#define UI_TEXT_Y_OFFSET_IT "Set Y offset:%T1mm"
#define UI_TEXT_Z_OFFSET_IT "Set Z offset:%T2mm"
// Spanish translation
#define UI_TEXT_ON_ES "On"
#define UI_TEXT_OFF_ES "Off"
#define UI_TEXT_NA_ES "N/A" // Output for not available
#define UI_TEXT_YES_ES "Si"
#define UI_TEXT_NO_ES "No"
#define UI_TEXT_PRINT_POS_ES "Imprimiendo..."
#define UI_TEXT_PRINTING_ES "Imprimiendo"
#define UI_TEXT_IDLE_ES "Idle"
#define UI_TEXT_NOSDCARD_ES "Sin tarjeta SD"
#define UI_TEXT_ERROR_ES "**** ERROR ****"
#define UI_TEXT_BACK_ES "Atras " cUP
#define UI_TEXT_QUICK_SETTINGS_ES "Configuracion Rapida"
#define UI_TEXT_ERRORMSG_ES "%oe"
#define UI_TEXT_CONFIGURATION_ES "Configuracion"
#define UI_TEXT_POSITION_ES "Posicion"
#define UI_TEXT_EXTRUDER_ES "Extrusor"
#define UI_TEXT_SD_CARD_ES "Tarjeta SD"
#define UI_TEXT_DEBUGGING_ES "Debugging"
#define UI_TEXT_HOME_DELTA_ES "Delta Home"
#define UI_TEXT_HOME_ALL_ES "Todo Home"
#define UI_TEXT_HOME_X_ES "X Home"
#define UI_TEXT_HOME_Y_ES "Y Home"
#define UI_TEXT_HOME_Z_ES "Z Home"
#define UI_TEXT_PREHEAT_PLA_ES "Precalentar PLA"
#define UI_TEXT_PREHEAT_ABS_ES "Precalentar ABS"
#define UI_TEXT_LIGHTS_ONOFF_ES "Luces:%lo"
#define UI_TEXT_COOLDOWN_ES "Enfriar"
#define UI_TEXT_SET_TO_ORIGIN_ES "Fija a origen"
#define UI_TEXT_DISABLE_STEPPER_ES "Desactiva motor"
#define UI_TEXT_X_POSITION_ES "Posicion X"
#define UI_TEXT_X_POS_FAST_ES "Pos. Rapida X"
#define UI_TEXT_Y_POSITION_ES "Posicion Y"
#define UI_TEXT_Y_POS_FAST_ES "Pos. Rapida Y"
#define UI_TEXT_Z_POSITION_ES "Posicion Z"
#define UI_TEXT_Z_POS_FAST_ES "Pos. Rapida Z"
#define UI_TEXT_E_POSITION_ES "Extr. Posicion"
#define UI_TEXT_BED_TEMP_ES "Temp.Cama:%eb/%Eb" cDEG "C"
#define UI_TEXT_EXTR0_TEMP_ES "Temp. 1 :%e0/%E0" cDEG "C"
#define UI_TEXT_EXTR1_TEMP_ES "Temp. 2 :%e1/%E1" cDEG "C"
#define UI_TEXT_EXTR2_TEMP_ES "Temp. 3 :%e2/%E2" cDEG "C"
#define UI_TEXT_EXTR0_OFF_ES "Extrusor 1 Off"
#define UI_TEXT_EXTR1_OFF_ES "Extrusor 2 Off"
#define UI_TEXT_EXTR2_OFF_ES "Extrusor 3 Off"
#define UI_TEXT_EXTR0_SELECT_ES "%X0 Select Extr. 1"
#define UI_TEXT_EXTR1_SELECT_ES "%X1 Select Extr. 2"
#define UI_TEXT_EXTR2_SELECT_ES "%X2 Select Extr. 3"
#define UI_TEXT_EXTR_ORIGIN_ES "Fija Originen"
#define UI_TEXT_PRINT_X_ES "Print X:%ax"
#define UI_TEXT_PRINT_Y_ES "Print Y:%ay"
#define UI_TEXT_PRINT_Z_ES "Print Z:%az"
#define UI_TEXT_PRINT_Z_DELTA_ES "Print:%az"
#define UI_TEXT_MOVE_X_ES "Mueve X:%aX"
#define UI_TEXT_MOVE_Y_ES "Mueve Y:%aY"
#define UI_TEXT_MOVE_Z_ES "Mueve Z:%aZ"
#define UI_TEXT_MOVE_Z_DELTA_ES "Mueve:%aZ"
#define UI_TEXT_JERK_ES "Jerk:%aj"
#define UI_TEXT_ZJERK_ES "Z-Jerk:%aJ"
#define UI_TEXT_ACCELERATION_ES "Aceleracion"
#define UI_TEXT_STORE_TO_EEPROM_ES "Almacena en EEPROM"
#define UI_TEXT_LOAD_EEPROM_ES "Carga de EEPROM"
#define UI_TEXT_DBG_ECHO_ES "Echo :%do"
#define UI_TEXT_DBG_INFO_ES "Info :%di"
#define UI_TEXT_DBG_ERROR_ES "Errors :%de"
#define UI_TEXT_DBG_DRYRUN_ES "Ejecucion vacio:%dd"
#define UI_TEXT_DBG_ENDSTOP_ES "EndStop:%dp"
#define UI_TEXT_OPS_OFF_ES "%O0 OPS Off"
#define UI_TEXT_OPS_CLASSIC_ES "%O1 OPS Classica"
#define UI_TEXT_OPS_FAST_ES "%O2 OPS Rapida"
#define UI_TEXT_OPS_RETRACT_ES "Retraccion :%Or"
#define UI_TEXT_OPS_BACKSLASH_ES "Backsl. :%Ob"
#define UI_TEXT_OPS_MINDIST_ES "Min.dist:%Od"
#define UI_TEXT_OPS_MOVE_AFTER_ES "Move after:%Oa"
#define UI_TEXT_ANTI_OOZE_ES "Anti Ooze"
#define UI_TEXT_PRINT_FILE_ES "Imprimiendo fichero"
#define UI_TEXT_PAUSE_PRINT_ES "Pausando impresion"
#define UI_TEXT_CONTINUE_PRINT_ES "Continuando impresion"
#define UI_TEXT_UNMOUNT_CARD_ES "Desmontando Tarjeta"
#define UI_TEXT_MOUNT_CARD_ES "Montando Card"
#define UI_TEXT_DELETE_FILE_ES "Borrando fichero"
#define UI_TEXT_FEEDRATE_ES "Feedrate"
#define UI_TEXT_FEED_MAX_X_ES "X Max:%fx"
#define UI_TEXT_FEED_MAX_Y_ES "Y Max:%fy"
#define UI_TEXT_FEED_MAX_Z_ES "Z Max:%fz"
#define UI_TEXT_FEED_MAX_Z_DELTA_ES "Max:%fz"
#define UI_TEXT_FEED_HOME_X_ES "X Home:%fX"
#define UI_TEXT_FEED_HOME_Y_ES "Y Home:%fY"
#define UI_TEXT_FEED_HOME_Z_ES "Z Home:%fZ"
#define UI_TEXT_FEED_HOME_Z_DELTA_ES "Home:%fZ"
#define UI_TEXT_ACTION_XPOSITION4A_ES "X:%x0 mm %dx%dX"
#define UI_TEXT_ACTION_XPOSITION4B_ES "Fin Carrera Min:%sx"
#define UI_TEXT_ACTION_XPOSITION4C_ES "Max:%sX"
#define UI_TEXT_ACTION_XPOSITION4D_ES ""
#define UI_TEXT_ACTION_YPOSITION4A_ES "Y:%x1 mm %dy%dY"
#define UI_TEXT_ACTION_YPOSITION4B_ES "Fin Carrera Min:%sy"
#define UI_TEXT_ACTION_YPOSITION4C_ES "Max:%sY"
#define UI_TEXT_ACTION_YPOSITION4D_ES ""
#define UI_TEXT_ACTION_ZPOSITION4A_ES "Z:%x2 mm %dz%dZ"
#define UI_TEXT_ACTION_ZPOSITION4B_ES "Fin Carrera Min:%sz"
#define UI_TEXT_ACTION_ZPOSITION4C_ES "Max:%sZ"
#define UI_TEXT_ACTION_ZPOSITION4D_ES ""
#define UI_TEXT_ACTION_XPOSITION_FAST4A_ES "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST4B_ES "Fin Carrera Min:%sx"
#define UI_TEXT_ACTION_XPOSITION_FAST4C_ES "Max:%sX"
#define UI_TEXT_ACTION_XPOSITION_FAST4D_ES ""
#define UI_TEXT_ACTION_YPOSITION_FAST4A_ES "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST4B_ES "Fin Carrera Min:%sy"
#define UI_TEXT_ACTION_YPOSITION_FAST4C_ES "Max:%sY"
#define UI_TEXT_ACTION_YPOSITION_FAST4D_ES ""
#define UI_TEXT_ACTION_ZPOSITION_FAST4A_ES "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST4B_ES "Fin Carrera Min:%sz"
#define UI_TEXT_ACTION_ZPOSITION_FAST4C_ES "Max:%sZ"
#define UI_TEXT_ACTION_ZPOSITION_FAST4D_ES ""
#define UI_TEXT_ACTION_EPOSITION_FAST2A_ES "E:%x3 mm"
#define UI_TEXT_ACTION_EPOSITION_FAST2B_ES "1 click = 1 mm"
#define UI_TEXT_ACTION_XPOSITION2A_ES "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION2B_ES "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION2A_ES "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION2B_ES "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION2A_ES "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION2B_ES "Min:%sz Max:%sZ"
#define UI_TEXT_ACTION_XPOSITION_FAST2A_ES "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST2B_ES "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION_FAST2A_ES "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST2B_ES "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION_FAST2A_ES "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST2B_ES "Min:%sz Max:%sZ"
#define UI_TEXT_FANSPEED_ES "Velocida ventilador"
#define UI_TEXT_ACTION_FANSPEED_ES "Vel. vent.:%Fs%%%"
#define UI_TEXT_FAN_OFF_ES "Apaga ventilador"
#define UI_TEXT_FAN_25_ES "Ventilador al 25%%%"
#define UI_TEXT_FAN_50_ES "Ventilador al 50%%%"
#define UI_TEXT_FAN_75_ES "Ventilador al 75%%%"
#define UI_TEXT_FAN_FULL_ES "Ventilador al 100%%%"
#define UI_TEXT_STEPPER_INACTIVE_ES "Motor Inactivo"
#define UI_TEXT_STEPPER_INACTIVE2A_ES "Dis. Despues: %is"
#define UI_TEXT_STEPPER_INACTIVE2B_ES "[min] 0=Off"
#define UI_TEXT_POWER_INACTIVE_ES "Max. Inactivo"
#define UI_TEXT_POWER_INACTIVE2A_ES "Dis. Despues: %ip"
#define UI_TEXT_POWER_INACTIVE2B_ES "[min] 0=Off"
#define UI_TEXT_GENERAL_ES "General"
#define UI_TEXT_BAUDRATE_ES "Baudrate:%oc"
#define UI_TEXT_EXTR_STEPS_ES "Pasos/MM:%Se"
#define UI_TEXT_EXTR_START_FEED_ES "Start FR:%Xf"
#define UI_TEXT_EXTR_MAX_FEED_ES "Max FR:%XF"
#define UI_TEXT_EXTR_ACCEL_ES "Acel:%XA"
#define UI_TEXT_EXTR_WATCH_ES "Tiempo Estab.:%Xw"
#define UI_TEXT_EXTR_ADVANCE_L_ES "Advance lin:%Xl"
#define UI_TEXT_EXTR_ADVANCE_K_ES "Advance quad:%Xa"
#define UI_TEXT_EXTR_MANAGER_ES "Control:%Xh"
#define UI_TEXT_EXTR_PGAIN_ES "PID P:%Xp"
#define UI_TEXT_EXTR_DEADTIME_ES "Tiempo muerto:%Xp"
#define UI_TEXT_EXTR_DMAX_DT_ES "PWM control:%XM"
#define UI_TEXT_EXTR_IGAIN_ES "PID I:%Xi"
#define UI_TEXT_EXTR_DGAIN_ES "PID D:%Xd"
#define UI_TEXT_EXTR_DMIN_ES "Drive Min:%Xm"
#define UI_TEXT_EXTR_DMAX_ES "Drive Max:%XM"
#define UI_TEXT_EXTR_PMAX_ES "PID Max:%XD"
#define UI_TEXT_EXTR_XOFF_ES "X-Offset:%Xx"
#define UI_TEXT_EXTR_YOFF_ES "Y-Offset:%Xy"
#define UI_TEXT_STRING_HM_BANGBANG_ES "BangBang"
#define UI_TEXT_STRING_HM_PID_ES "PID"
#define UI_TEXT_STRING_ACTION_ES "Accion:%la"
#define UI_TEXT_HEATING_EXTRUDER_ES "Calentando Extrusor"
#define UI_TEXT_HEATING_BED_ES "Calentando Cama"
#define UI_TEXT_KILLED_ES "Aborta"
#define UI_TEXT_STEPPER_DISABLED_ES "Deshabilita motor"
#define UI_TEXT_EEPROM_STOREDA_ES "Config."
#define UI_TEXT_EEPROM_STOREDB_ES "almacenada en EEPROM"
#define UI_TEXT_EEPROM_LOADEDA_ES "Config."
#define UI_TEXT_EEPROM_LOADEDB_ES "cargada de EEPROM"
#define UI_TEXT_UPLOADING_ES "Actualizando..."
#define UI_TEXT_PAGE_BUFFER_ES "Buffer:%oB"
#define UI_TEXT_PAGE_EXTRUDER_ES " E:%ec/%Ec" cDEG "C" cARROW "%oC"
#define UI_TEXT_PAGE_EXTRUDER1_ES "E1:%e0/%E0" cDEG "C" cARROW "%o0"
#define UI_TEXT_PAGE_EXTRUDER2_ES "E2:%e1/%E1" cDEG "C" cARROW "%o1"
#define UI_TEXT_PAGE_EXTRUDER3_ES "E3:%e2/%E2" cDEG "C" cARROW "%o2"
#define UI_TEXT_PAGE_BED_ES " B:%eb/%Eb" cDEG "C" cARROW "%ob"
#define UI_TEXT_SPEED_MULTIPLY_ES "Mult. Velocidad.:%om%%%"
#define UI_TEXT_FLOW_MULTIPLY_ES "Mult. Flujo:%of%%%"
#define UI_TEXT_SHOW_MEASUREMENT_ES "Mostrar medicion"
#define UI_TEXT_RESET_MEASUREMENT_ES "Resetear medicion"
#define UI_TEXT_SET_MEASURED_ORIGIN_ES "Set Z=0"
#define UI_TEXT_ZCALIB_ES "Z calib."
#define UI_TEXT_SET_P1_ES "Set P1"
#define UI_TEXT_SET_P2_ES "Set P2"
#define UI_TEXT_SET_P3_ES "Set P3"
#define UI_TEXT_CALCULATE_LEVELING_ES "Calcula nivelacion"
#define UI_TEXT_LEVEL_ES "Nivel delta"
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP_ES "Esperando Temp.%XT" cDEG "C"
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS_ES "Esperando Unidad:%XUmm"
#define UI_TEXT_SD_REMOVED_ES "Tarjeta SD retira"
#define UI_TEXT_SD_INSERTED_ES "Tarjeta SD insertada"
#define UI_TEXT_PRINTER_READY_ES "Impresora lista."
// Printtime output gets aggregated like <Days_5gisgits>UI_TEXT_PRINTTIME_DAYS<Hours>UI_TEXT_PRINTTIME_HOURS<Minutes>UI_TEXT_PRINTTIME_MINUTES
// ___88 days 12:45
#define UI_TEXT_PRINTTIME_DAYS_ES " dias "
#define UI_TEXT_PRINTTIME_HOURS_ES ":"
#define UI_TEXT_PRINTTIME_MINUTES_ES ""
#define UI_TEXT_PRINT_TIME_ES "tiempo de impresion"
#define UI_TEXT_PRINT_FILAMENT_ES "Filamento impresa"
#define UI_TEXT_PRINTED_ES "impreso"
#define UI_TEXT_POWER_ES "Energie ATX on/off"
#define UI_TEXT_STRING_HM_DEADTIME_ES "Tiempo muerto"
#define UI_TEXT_STRING_HM_SLOWBANG_ES "SlowBang"
#define UI_TEXT_STOP_PRINT_ES "Detener impresion"
#define UI_TEXT_Z_BABYSTEPPING_ES "Z Babystep.:%oYmm"
#define UI_TEXT_CHANGE_FILAMENT_ES "Cambio filamento"
#define UI_TEXT_WIZ_CH_FILAMENT1_ES "Cambio filamento"
#define UI_TEXT_WIZ_CH_FILAMENT2_ES "Gire para mover"
#define UI_TEXT_WIZ_CH_FILAMENT3_ES "fil. arriba/abajo"
#define UI_TEXT_CLICK_DONE_ES "Clic cuando se hace"
#define UI_TEXT_AUTOLEVEL_ONOFF_ES "Autolevel: %ll"
#define UI_TEXT_SERVOPOS_ES "Pos. servo: %oS"
#define UI_TEXT_IGNORE_M106_ES "Ignorar M106 cmd %Fi"
#define UI_TEXT_WIZ_REHEAT1_ES "Haga clic para"
#define UI_TEXT_WIZ_REHEAT2_ES "recalentar extr."
#define UI_TEXT_WIZ_WAITTEMP1_ES "Espere a temp."
#define UI_TEXT_WIZ_WAITTEMP2_ES "objetivo ..."
#define UI_TEXT_EXTRUDER_JAM_ES "Atasco extrusora"
#define UI_TEXT_STANDBY_ES "Standby"
#define UI_TEXT_BED_COATING_ES "Recubrimiento cama"
#define UI_TEXT_BED_COATING_SET1_ES "Rec. cama ajustado a"
#define UI_TEXT_BED_COATING_SET2_ES ""
#define UI_TEXT_NOCOATING_ES "Sin recubrimiento"
#define UI_TEXT_BUILDTAK_ES "BuildTak"
#define UI_TEXT_KAPTON_ES "Kapton"
#define UI_TEXT_BLUETAPE_ES "Cinta adhesiva azul"
#define UI_TEXT_PETTAPE_ES "Verde PET cinta"
#define UI_TEXT_GLUESTICK_ES "Barra de pegamento"
#define UI_TEXT_CUSTOM_ES "Custom"
#define UI_TEXT_COATING_CUSTOM_ES "Custom:%BCmm"
#define UI_TEXT_LANGUAGE_ES "Idioma"
#if NUM_EXTRUDER > 2 || MIXING_EXTRUDER != 0
#define UI_TEXT_MAINPAGE6_1_ES "\xa %ec/%Ec\xb0 X:%x0"
#else
#define UI_TEXT_MAINPAGE6_1_ES "\xa %e0/%E0\xb0 X:%x0"
#endif // NUM_EXTRUDER
#if NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_2_ES "\xa %e1/%E1\xb0 Y:%x1"
#elif HAVE_HEATED_BED
#define UI_TEXT_MAINPAGE6_2_ES "\xe %eb/%Eb\xb0 Y:%x1"
#else
#define UI_TEXT_MAINPAGE6_2_ES " Y:%x1"
#endif
#if HAVE_HEATED_BED && NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_3_ES "\xe %eb/%Eb\xb0 Z:%x2"
#elif FEATURE_DITTO_PRINTING
#define UI_TEXT_MAINPAGE6_3_ES "Copias: %ed Z:%x2"
#else
#define UI_TEXT_MAINPAGE6_3_ES "Flujo:\xfd %of%%% Z:%x2"
#endif
#define UI_TEXT_MAINPAGE6_4_ES "Mul: %om%%% \xfd E: %x4m"
#define UI_TEXT_MAINPAGE6_5_ES "Buf: %oB"
#define UI_TEXT_MAINPAGE6_6_ES "%os"
#define UI_TEXT_MAINPAGE_TEMP_BED_ES cTEMP "%ec/%Ec" cDEG "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_BED_ES "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_Z_BUF_ES "Z:%x2 Buf : %oB"
#define UI_TEXT_MAINPAGE_MUL_EUSAGE_ES "Mul: %om E:%x4"
#define UI_TEXT_MAINPAGE_XY_ES "X:%x0 Y:%x1"
#define UI_TEXT_PRINT_TIME_VALUE_ES "%Ut"
#define UI_TEXT_PRINT_FILAMENT_VALUE_ES "%Uf m"
#define UI_TEXT_METER_PRINTED_ES "%Uf m " UI_TEXT_PRINTED_ES
#define UI_TEXT_STATUS_ES "%os"
#define UI_TEXT_EMPTY_ES ""
#define UI_TEXT_TEMP_SET_ES cTEMP "%ec/%Ec" cDEG
#define UI_TEXT_CURRENT_TEMP_ES cTEMP "%ec" cDEG
#define UI_TEXT_COATING_THICKNESS_ES " %BCmm"
#define UI_TEXT_EXTR3_TEMP_ES "Temp. 4 :%e3/%E3" cDEG "C"
#define UI_TEXT_EXTR4_TEMP_ES "Temp. 5 :%e4/%E4" cDEG "C"
#define UI_TEXT_EXTR5_TEMP_ES "Temp. 6 :%e5/%E5" cDEG "C"
#define UI_TEXT_EXTR3_OFF_ES "Extrusor 4 Off"
#define UI_TEXT_EXTR4_OFF_ES "Extrusor 5 Off"
#define UI_TEXT_EXTR5_OFF_ES "Extrusor 6 Off"
#define UI_TEXT_EXTR3_SELECT_ES "%X3 Select Extr. 4"
#define UI_TEXT_EXTR4_SELECT_ES "%X4 Select Extr. 5"
#define UI_TEXT_EXTR5_SELECT_ES "%X5 Select Extr. 6"
#define UI_TEXT_DITTO_0_ES "%D0 No Hay Copias"
#define UI_TEXT_DITTO_1_ES "%D1 1 Copia"
#define UI_TEXT_DITTO_2_ES "%D2 2 Copias"
#define UI_TEXT_DITTO_3_ES "%D3 3 Copias"
#define UI_TEXT_ZPROBE_HEIGHT_ES "Altura Z-Probe:%zh"
#define UI_TEXT_OFFSETS_ES "Set print offsets"
#define UI_TEXT_X_OFFSET_ES "Set X offset:%T0mm"
#define UI_TEXT_Y_OFFSET_ES "Set Y offset:%T1mm"
#define UI_TEXT_Z_OFFSET_ES "Set Z offset:%T2mm"
// *************** Swedish translation ****************
// By Daniel Tedenljung 2013-08-21
#define UI_TEXT_ON_SE "P" STR_uuml ""
#define UI_TEXT_OFF_SE "Av"
#define UI_TEXT_NA_SE "N/A" // Output for not available
#define UI_TEXT_YES_SE "Ja"
#define UI_TEXT_NO_SE "Nej"
#define UI_TEXT_PRINT_POS_SE "Skriver ut..."
#define UI_TEXT_PRINTING_SE "Skriver"
#define UI_TEXT_IDLE_SE "Sysslol" STR_ouml "s"
#define UI_TEXT_NOSDCARD_SE "Inget SD-kort"
#define UI_TEXT_ERROR_SE "**** FEL ****"
#define UI_TEXT_BACK_SE "Tillbaka " cUP
#define UI_TEXT_QUICK_SETTINGS_SE "Inst" STR_auml "llnigar"
#define UI_TEXT_ERRORMSG_SE "%oe"
#define UI_TEXT_CONFIGURATION_SE "Konfiguration"
#define UI_TEXT_POSITION_SE "Position"
#define UI_TEXT_EXTRUDER_SE "Extruder"
#define UI_TEXT_SD_CARD_SE "SD-kort"
#define UI_TEXT_DEBUGGING_SE "Debugging"
#define UI_TEXT_HOME_DELTA_SE "Hem delta"
#define UI_TEXT_HOME_ALL_SE "K" STR_ouml "r hem alla"
#define UI_TEXT_HOME_X_SE "K" STR_ouml "r hem X"
#define UI_TEXT_HOME_Y_SE "K" STR_ouml "r hem Y"
#define UI_TEXT_HOME_Z_SE "K" STR_ouml "r hem Z"
#define UI_TEXT_PREHEAT_PLA_SE "F" STR_ouml "rv" STR_auml "rm f" STR_ouml "r PLA"
#define UI_TEXT_PREHEAT_ABS_SE "F" STR_ouml "rv" STR_auml "rm f" STR_ouml "r ABS"
#define UI_TEXT_LIGHTS_ONOFF_SE "Lights:%lo"
#define UI_TEXT_COOLDOWN_SE "Kyl ner"
#define UI_TEXT_SET_TO_ORIGIN_SE "S" STR_auml "tt som origo"
#define UI_TEXT_DISABLE_STEPPER_SE "St" STR_auml "ng av stegmotor"
#define UI_TEXT_X_POSITION_SE "X-position"
#define UI_TEXT_X_POS_FAST_SE "X-pos. snabb"
#define UI_TEXT_Y_POSITION_SE "Y-position"
#define UI_TEXT_Y_POS_FAST_SE "Y-pos. snabb"
#define UI_TEXT_Z_POSITION_SE "Z-osition"
#define UI_TEXT_Z_POS_FAST_SE "Z-pos. snabb"
#define UI_TEXT_E_POSITION_SE "Extr.-position"
#define UI_TEXT_BED_TEMP_SE "B" STR_auml "dd-temp:%eb/%Eb" cDEG "C"
#define UI_TEXT_EXTR0_TEMP_SE "Temp. 1 :%e0/%E0" cDEG "C"
#define UI_TEXT_EXTR1_TEMP_SE "Temp. 2 :%e1/%E1" cDEG "C"
#define UI_TEXT_EXTR2_TEMP_SE "Temp. 3 :%e2/%E2" cDEG "C"
#define UI_TEXT_EXTR0_OFF_SE "Extruder 1 av"
#define UI_TEXT_EXTR1_OFF_SE "Extruder 2 av"
#define UI_TEXT_EXTR2_OFF_SE "Extruder 3 av"
#define UI_TEXT_EXTR0_SELECT_SE "%X0 V" STR_auml "lj Extr. 1"
#define UI_TEXT_EXTR1_SELECT_SE "%X1 V" STR_auml "lj Extr. 2"
#define UI_TEXT_EXTR2_SELECT_SE "%X2 V" STR_auml "lj Extr. 3"
#define UI_TEXT_EXTR_ORIGIN_SE "S" STR_auml "tt origo"
#define UI_TEXT_PRINT_X_SE "Skriv X:%ax"
#define UI_TEXT_PRINT_Y_SE "Skriv Y:%ay"
#define UI_TEXT_PRINT_Z_SE "Skriv Z:%az"
#define UI_TEXT_PRINT_Z_DELTA_SE "Skriv:%az"
#define UI_TEXT_MOVE_X_SE "Transp. X:%aX"
#define UI_TEXT_MOVE_Y_SE "Transp. Y:%aY"
#define UI_TEXT_MOVE_Z_SE "Transp. Z:%aZ"
#define UI_TEXT_MOVE_Z_DELTA_SE "Transp.:%aZ"
#define UI_TEXT_JERK_SE "Ryck: %aj"
#define UI_TEXT_ZJERK_SE "Z-ryck: %aJ"
#define UI_TEXT_ACCELERATION_SE "Acceleration"
#define UI_TEXT_STORE_TO_EEPROM_SE "Spara till EEPROM"
#define UI_TEXT_LOAD_EEPROM_SE "Ladda f. EEPROM"
#define UI_TEXT_DBG_ECHO_SE "Eko: %do"
#define UI_TEXT_DBG_INFO_SE "Info: %di"
#define UI_TEXT_DBG_ERROR_SE "Errors: %de"
#define UI_TEXT_DBG_DRYRUN_SE "Torrk" STR_ouml "r:%dd"
#define UI_TEXT_DBG_ENDSTOP_SE "EndStop:%dp"
#define UI_TEXT_OPS_OFF_SE "%O1 OPS av"
#define UI_TEXT_OPS_CLASSIC_SE "%O2 OPS klassisk"
#define UI_TEXT_OPS_FAST_SE "%O3 OPS snabb"
#define UI_TEXT_OPS_RETRACT_SE "Backa: %Or"
#define UI_TEXT_OPS_BACKSLASH_SE "Backsl. :%Ob"
#define UI_TEXT_OPS_MINDIST_SE "Min.dist: %Od"
#define UI_TEXT_OPS_MOVE_AFTER_SE "Flytta efter:%Oa"
#define UI_TEXT_ANTI_OOZE_SE "Antikladd"
#define UI_TEXT_PRINT_FILE_SE "Skriv ut fil"
#define UI_TEXT_PAUSE_PRINT_SE "Pausa utskrift"
#define UI_TEXT_CONTINUE_PRINT_SE "Forts" STR_auml "tt utskrift"
#define UI_TEXT_UNMOUNT_CARD_SE "Mata ut kort"
#define UI_TEXT_MOUNT_CARD_SE "Anslut kort"
#define UI_TEXT_DELETE_FILE_SE "Radera fil"
#define UI_TEXT_FEEDRATE_SE "Matning"
#define UI_TEXT_FEED_MAX_X_SE "Max X:%fx"
#define UI_TEXT_FEED_MAX_Y_SE "Max Y:%fy"
#define UI_TEXT_FEED_MAX_Z_SE "Max Z:%fz"
#define UI_TEXT_FEED_MAX_Z_DELTA_SE "Max:%fz"
#define UI_TEXT_FEED_HOME_X_SE "Ref X:%fX"
#define UI_TEXT_FEED_HOME_Y_SE "Ref Y:%fY"
#define UI_TEXT_FEED_HOME_Z_SE "Ref Z:%fZ"
#define UI_TEXT_FEED_HOME_Z_DELTA_SE "Ref:%fZ"
#define UI_TEXT_ACTION_XPOSITION4A_SE "X:%x0 mm %dx%dX"
#define UI_TEXT_ACTION_XPOSITION4B_SE "Min " STR_auml "ndl" STR_auml "ge:%sx"
#define UI_TEXT_ACTION_XPOSITION4C_SE "Max " STR_auml "ndl" STR_auml "ge:%sX"
#define UI_TEXT_ACTION_XPOSITION4D_SE ""
#define UI_TEXT_ACTION_YPOSITION4A_SE "Y:%x1 mm %dy%dY"
#define UI_TEXT_ACTION_YPOSITION4B_SE "Min " STR_auml "ndl" STR_auml "ge:%sy"
#define UI_TEXT_ACTION_YPOSITION4C_SE "Max " STR_auml "ndl" STR_auml "ge:%sY"
#define UI_TEXT_ACTION_YPOSITION4D_SE ""
#define UI_TEXT_ACTION_ZPOSITION4A_SE "Z:%x2 mm %dz%dZ"
#define UI_TEXT_ACTION_ZPOSITION4B_SE "Min " STR_auml "ndl" STR_auml "ge:%sz"
#define UI_TEXT_ACTION_ZPOSITION4C_SE "Max " STR_auml "ndl" STR_auml "ge:%sZ"
#define UI_TEXT_ACTION_ZPOSITION4D_SE ""
#define UI_TEXT_ACTION_XPOSITION_FAST4A_SE "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST4B_SE "Min " STR_auml "ndl" STR_auml "ge:%sx"
#define UI_TEXT_ACTION_XPOSITION_FAST4C_SE "Max " STR_auml "ndl" STR_auml "ge:%sX"
#define UI_TEXT_ACTION_XPOSITION_FAST4D_SE ""
#define UI_TEXT_ACTION_YPOSITION_FAST4A_SE "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST4B_SE "Min " STR_auml "ndl" STR_auml "ge:%sy"
#define UI_TEXT_ACTION_YPOSITION_FAST4C_SE "Max " STR_auml "ndl" STR_auml "ge:%sY"
#define UI_TEXT_ACTION_YPOSITION_FAST4D_SE ""
#define UI_TEXT_ACTION_ZPOSITION_FAST4A_SE "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST4B_SE "Min " STR_auml "ndl" STR_auml "ge:%sz"
#define UI_TEXT_ACTION_ZPOSITION_FAST4C_SE "Max " STR_auml "ndl" STR_auml "ge:%sZ"
#define UI_TEXT_ACTION_ZPOSITION_FAST4D_SE ""
#define UI_TEXT_ACTION_EPOSITION_FAST2A_SE "E:%x3 mm"
#define UI_TEXT_ACTION_EPOSITION_FAST2B_SE "1 click = 1 mm"
#define UI_TEXT_ACTION_XPOSITION2A_SE "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION2B_SE "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION2A_SE "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION2B_SE "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION2A_SE "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION2B_SE "Min:%sz Max:%sZ"
#define UI_TEXT_ACTION_XPOSITION_FAST2A_SE "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST2B_SE "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION_FAST2A_SE "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST2B_SE "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION_FAST2A_SE "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST2B_SE "Min:%sz Max:%sZ"
#define UI_TEXT_FANSPEED_SE "Fl" STR_auml "kt hast."
#define UI_TEXT_ACTION_FANSPEED_SE "Fl" STR_auml "kt hast.:%Fs%%%"
#define UI_TEXT_FAN_OFF_SE "St" STR_auml "ng av fl" STR_auml "kt"
#define UI_TEXT_FAN_25_SE "Fl" STR_auml "kt 25%%%"
#define UI_TEXT_FAN_50_SE "Fl" STR_auml "kt 50%%%"
#define UI_TEXT_FAN_75_SE "Fl" STR_auml "kt 75%%%"
#define UI_TEXT_FAN_FULL_SE "Full fl" STR_auml "kt"
#define UI_TEXT_STEPPER_INACTIVE_SE "Stegmotorer inakt."
#define UI_TEXT_STEPPER_INACTIVE2A_SE "Inakt. efter: %is"
#define UI_TEXT_STEPPER_INACTIVE2B_SE "[min] 0=Off"
#define UI_TEXT_POWER_INACTIVE_SE "Max. inaktiv"
#define UI_TEXT_POWER_INACTIVE2A_SE "Inakt. efter: %ip"
#define UI_TEXT_POWER_INACTIVE2B_SE "[min] 0=Off"
#define UI_TEXT_GENERAL_SE "Generella"
#define UI_TEXT_BAUDRATE_SE "Baudrate:%oc"
#define UI_TEXT_EXTR_STEPS_SE "Steg/MM:%Se"
#define UI_TEXT_EXTR_START_FEED_SE "Start FR:%Xf"
#define UI_TEXT_EXTR_MAX_FEED_SE "Max FR:%XF"
#define UI_TEXT_EXTR_ACCEL_SE "Accel:%XA"
#define UI_TEXT_EXTR_WATCH_SE "Stab. tid:%Xw"
#define UI_TEXT_EXTR_ADVANCE_L_SE "Advance lin:%Xl"
#define UI_TEXT_EXTR_ADVANCE_K_SE "Advance quad:%Xa"
#define UI_TEXT_EXTR_MANAGER_SE "Control:%Xh"
#define UI_TEXT_EXTR_PGAIN_SE "PID P:%Xp"
#define UI_TEXT_EXTR_DEADTIME_SE "D" STR_ouml "dtid:%Xp"
#define UI_TEXT_EXTR_DMAX_DT_SE "Kontroll PWM:%XM"
#define UI_TEXT_EXTR_IGAIN_SE "PID I:%Xi"
#define UI_TEXT_EXTR_DGAIN_SE "PID D:%Xd"
#define UI_TEXT_EXTR_DMIN_SE "Drive min:%Xm"
#define UI_TEXT_EXTR_DMAX_SE "Drive max:%XM"
#define UI_TEXT_EXTR_PMAX_SE "PID max:%XD"
#define UI_TEXT_EXTR_XOFF_SE "X-offset:%Xx"
#define UI_TEXT_EXTR_YOFF_SE "Y-offset:%Xy"
#define UI_TEXT_STRING_HM_BANGBANG_SE "BangBang"
#define UI_TEXT_STRING_HM_PID_SE "PID"
#define UI_TEXT_STRING_ACTION_SE "Aktion:%la"
#define UI_TEXT_HEATING_EXTRUDER_SE "V" STR_auml "rmer Extruder"
#define UI_TEXT_HEATING_BED_SE "V" STR_auml "rmer B" STR_auml "dd"
#define UI_TEXT_KILLED_SE "D" STR_ouml "dad"
#define UI_TEXT_STEPPER_DISABLED_SE "Stegmotorer av"
#define UI_TEXT_EEPROM_STOREDA_SE "Konfiguration"
#define UI_TEXT_EEPROM_STOREDB_SE "sparad i EEPROM"
#define UI_TEXT_EEPROM_LOADEDA_SE "Konfiguration"
#define UI_TEXT_EEPROM_LOADEDB_SE "laddat fr. EEPROM"
#define UI_TEXT_UPLOADING_SE "Uppladdning..."
#define UI_TEXT_PAGE_BUFFER_SE "Buffer:%oB"
#define UI_TEXT_PAGE_EXTRUDER_SE " E:%ec/%Ec" cDEG "C" cARROW "%oC"
#define UI_TEXT_PAGE_EXTRUDER1_SE "E1:%e0/%E0" cDEG "C" cARROW "%o0"
#define UI_TEXT_PAGE_EXTRUDER2_SE "E2:%e1/%E1" cDEG "C" cARROW "%o1"
#define UI_TEXT_PAGE_EXTRUDER3_SE "E3:%e2/%E2" cDEG "C" cARROW "%o2"
#define UI_TEXT_PAGE_BED_SE " B:%eb/%Eb" cDEG "C" cARROW "%ob"
#define UI_TEXT_SPEED_MULTIPLY_SE "Hast. Mul.:%om%%%"
#define UI_TEXT_FLOW_MULTIPLY_SE "Fl" STR_ouml "de Mul.:%of%%%"
#define UI_TEXT_SHOW_MEASUREMENT_SE "Visa m" STR_auml "tning"
#define UI_TEXT_RESET_MEASUREMENT_SE "Aterst" STR_auml "ll m" STR_auml "tning"
#define UI_TEXT_SET_MEASURED_ORIGIN_SE "St" STR_auml "ll Z=0"
#define UI_TEXT_ZCALIB_SE "Z kalib."
#define UI_TEXT_SET_P1_SE "St" STR_auml "ll P1"
#define UI_TEXT_SET_P2_SE "St" STR_auml "ll P2"
#define UI_TEXT_SET_P3_SE "Set P3"
#define UI_TEXT_CALCULATE_LEVELING_SE "ber" STR_auml "kna nivellering"
#define UI_TEXT_LEVEL_SE "Niva delta"
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP_SE "Inv" STR_auml "nta temp.%XT" cDEG "C"
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS_SE "Inv" STR_auml "nta pos:%XUmm"
#define UI_TEXT_SD_REMOVED_SE "SD-kort tas bort"
#define UI_TEXT_SD_INSERTED_SE "SD-kort isatt"
#define UI_TEXT_PRINTER_READY_SE "Utskrift klar."
// Printtime output gets aggregated like <Days_5gisgits>UI_TEXT_PRINTTIME_DAYS<Hours>UI_TEXT_PRINTTIME_HOURS<Minutes>UI_TEXT_PRINTTIME_MINUTES
// ___88 days 12:45
#define UI_TEXT_PRINTTIME_DAYS_SE " dagar "
#define UI_TEXT_PRINTTIME_HOURS_SE ":"
#define UI_TEXT_PRINTTIME_MINUTES_SE ""
#define UI_TEXT_PRINT_TIME_SE "Tryckningstid"
#define UI_TEXT_PRINT_FILAMENT_SE "Filament tryckt"
#define UI_TEXT_PRINTED_SE "tryckt"
#define UI_TEXT_POWER_SE "ATX str" STR_ouml "m p" STR_uuml "/av"
#define UI_TEXT_STRING_HM_DEADTIME_SE "D" STR_ouml "dtid"
#define UI_TEXT_STRING_HM_SLOWBANG_SE "SlowBang"
#define UI_TEXT_STOP_PRINT_SE "Stopp trycket"
#define UI_TEXT_Z_BABYSTEPPING_SE "Z babystep.:%oYmm"
#define UI_TEXT_CHANGE_FILAMENT_SE "" STR_Auml "ndra filamentet"
#define UI_TEXT_WIZ_CH_FILAMENT1_SE "" STR_Auml "ndra filamentet"
#define UI_TEXT_WIZ_CH_FILAMENT2_SE "Rotera att flytta"
#define UI_TEXT_WIZ_CH_FILAMENT3_SE "filamentet upp/ner"
#define UI_TEXT_CLICK_DONE_SE "Klicka n" STR_auml "r du " STR_auml "r klar"
#define UI_TEXT_AUTOLEVEL_ONOFF_SE "Autolevel: %ll"
#define UI_TEXT_SERVOPOS_SE "Servol" STR_auml "ge: %oS"
#define UI_TEXT_IGNORE_M106_SE "Ignorera M106 %Fi"
#define UI_TEXT_WIZ_REHEAT1_SE "Klicka f" STR_ouml "r att"
#define UI_TEXT_WIZ_REHEAT2_SE "v" STR_auml "rma extrudrar."
#define UI_TEXT_WIZ_WAITTEMP1_SE "V" STR_auml "nta pa"
#define UI_TEXT_WIZ_WAITTEMP2_SE "maltemperaturer ..."
#define UI_TEXT_EXTRUDER_JAM_SE "Extruder tr" STR_auml "ngsel"
#define UI_TEXT_STANDBY_SE "Standby"
#define UI_TEXT_BED_COATING_SE "B" STR_auml "ddbel" STR_auml "ggning"
#define UI_TEXT_BED_COATING_SET1_SE "B" STR_auml "ddbel" STR_auml "ggning:"
#define UI_TEXT_BED_COATING_SET2_SE ""
#define UI_TEXT_NOCOATING_SE "Ingen bel" STR_auml "ggning"
#define UI_TEXT_BUILDTAK_SE "BuildTak"
#define UI_TEXT_KAPTON_SE "Kapton"
#define UI_TEXT_BLUETAPE_SE "Bla maskeringstejp"
#define UI_TEXT_PETTAPE_SE "Gr" STR_ouml "n PET band"
#define UI_TEXT_GLUESTICK_SE "Limstift"
#define UI_TEXT_CUSTOM_SE "Anpassad"
#define UI_TEXT_COATING_CUSTOM_SE "Anpassad:%BCmm"
#define UI_TEXT_LANGUAGE_SE "Sprak"
#if NUM_EXTRUDER > 2 || MIXING_EXTRUDER != 0
#define UI_TEXT_MAINPAGE6_1_SE "\xa %ec/%Ec\xb0 X:%x0"
#else
#define UI_TEXT_MAINPAGE6_1_SE "\xa %e0/%E0\xb0 X:%x0"
#endif // NUM_EXTRUDER
#if NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_2_SE "\xa %e1/%E1\xb0 Y:%x1"
#elif HAVE_HEATED_BED
#define UI_TEXT_MAINPAGE6_2_SE "\xe %eb/%Eb\xb0 Y:%x1"
#else
#define UI_TEXT_MAINPAGE6_2_SE " Y:%x1"
#endif
#if HAVE_HEATED_BED && NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_3_SE "\xe %eb/%Eb\xb0 Z:%x2"
#elif FEATURE_DITTO_PRINTING
#define UI_TEXT_MAINPAGE6_3_SE "Kopior: %ed Z:%x2"
#else
#define UI_TEXT_MAINPAGE6_3_SE "Fl" STR_ouml "de:\xfd %of%%% Z:%x2"
#endif
#define UI_TEXT_MAINPAGE6_4_SE "Mul: %om%%% \xfd E: %x4m"
#define UI_TEXT_MAINPAGE6_5_SE "Buf: %oB"
#define UI_TEXT_MAINPAGE6_6_SE "%os"
#define UI_TEXT_MAINPAGE_TEMP_BED_SE cTEMP "%ec/%Ec" cDEG "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_BED_SE "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_Z_BUF_SE "Z:%x2 Buf : %oB"
#define UI_TEXT_MAINPAGE_MUL_EUSAGE_SE "Mul: %om E:%x4"
#define UI_TEXT_MAINPAGE_XY_SE "X:%x0 Y:%x1"
#define UI_TEXT_PRINT_TIME_VALUE_SE "%Ut"
#define UI_TEXT_PRINT_FILAMENT_VALUE_SE "%Uf m"
#define UI_TEXT_METER_PRINTED_SE "%Uf m " UI_TEXT_PRINTED_SE
#define UI_TEXT_STATUS_SE "%os"
#define UI_TEXT_EMPTY_SE ""
#define UI_TEXT_TEMP_SET_SE cTEMP "%ec/%Ec" cDEG
#define UI_TEXT_CURRENT_TEMP_SE cTEMP "%ec" cDEG
#define UI_TEXT_COATING_THICKNESS_SE " %BCmm"
#define UI_TEXT_EXTR3_TEMP_SE "Temp. 4 :%e3/%E3" cDEG "C"
#define UI_TEXT_EXTR4_TEMP_SE "Temp. 5 :%e4/%E4" cDEG "C"
#define UI_TEXT_EXTR5_TEMP_SE "Temp. 6 :%e5/%E5" cDEG "C"
#define UI_TEXT_EXTR3_OFF_SE "Extruder 4 av"
#define UI_TEXT_EXTR4_OFF_SE "Extruder 5 av"
#define UI_TEXT_EXTR5_OFF_SE "Extruder 6 av"
#define UI_TEXT_EXTR3_SELECT_SE "%X3 V" STR_auml "lj Extr. 4"
#define UI_TEXT_EXTR4_SELECT_SE "%X4 V" STR_auml "lj Extr. 5"
#define UI_TEXT_EXTR5_SELECT_SE "%X5 V" STR_auml "lj Extr. 6"
#define UI_TEXT_DITTO_0_SE "%D0 Inga Kopior"
#define UI_TEXT_DITTO_1_SE "%D1 1 Kopia"
#define UI_TEXT_DITTO_2_SE "%D2 2 Kopior"
#define UI_TEXT_DITTO_3_SE "%D3 3 Kopior"
#define UI_TEXT_ZPROBE_HEIGHT_SE "Z-probh" STR_ouml "jden:%zh"
#define UI_TEXT_OFFSETS_SE "Set print offsets"
#define UI_TEXT_X_OFFSET_SE "Set X offset:%T0mm"
#define UI_TEXT_Y_OFFSET_SE "Set Y offset:%T1mm"
#define UI_TEXT_Z_OFFSET_SE "Set Z offset:%T2mm"
// *************** French translation ****************
// *************** By Doudou ****************
#define UI_TEXT_ON_FR "On"
#define UI_TEXT_OFF_FR "Off"
#define UI_TEXT_NA_FR "N/A" // Output for not available
#define UI_TEXT_YES_FR "Oui"
#define UI_TEXT_NO_FR "Non"
#define UI_TEXT_PRINT_POS_FR "Impression..."
#define UI_TEXT_PRINTING_FR "Impression"
#define UI_TEXT_IDLE_FR "Au Repos"
#define UI_TEXT_NOSDCARD_FR "Pas de Carte SD"
#define UI_TEXT_ERROR_FR "**** ERREUR ****"
#define UI_TEXT_BACK_FR "Retour \001"
#define UI_TEXT_QUICK_SETTINGS_FR "Reglages Rapides"
#define UI_TEXT_ERRORMSG_FR "%oe"
#define UI_TEXT_CONFIGURATION_FR "Configuration"
#define UI_TEXT_POSITION_FR "Position"
#define UI_TEXT_EXTRUDER_FR "Extrudeuse"
#define UI_TEXT_SD_CARD_FR "Carte SD"
#define UI_TEXT_DEBUGGING_FR "Deboguer"
#define UI_TEXT_HOME_DELTA_FR "Accueil Delta"
#define UI_TEXT_HOME_ALL_FR "Accueil XYZ"
#define UI_TEXT_HOME_X_FR "Accueil X"
#define UI_TEXT_HOME_Y_FR "Accueil Y"
#define UI_TEXT_HOME_Z_FR "Accueil Z"
#define UI_TEXT_PREHEAT_PLA_FR "Prechauf. PLA"
#define UI_TEXT_PREHEAT_ABS_FR "Prechauf. ABS"
#define UI_TEXT_LIGHTS_ONOFF_FR "Eclairage :%lo"
#define UI_TEXT_COOLDOWN_FR "Refroidir"
#define UI_TEXT_SET_TO_ORIGIN_FR "Reglez sur Origine"
#define UI_TEXT_DISABLE_STEPPER_FR "Desactiv. Moteurs"
#define UI_TEXT_X_POSITION_FR "Position X"
#define UI_TEXT_X_POS_FAST_FR "Pos. Rapide X"
#define UI_TEXT_Y_POSITION_FR "Position Y"
#define UI_TEXT_Y_POS_FAST_FR "Pos. Rapide Y"
#define UI_TEXT_Z_POSITION_FR "Position Z"
#define UI_TEXT_Z_POS_FAST_FR "Pos. Rapide Z"
#define UI_TEXT_E_POSITION_FR "Position Extr."
#define UI_TEXT_BED_TEMP_FR "Lit Temp:%eb/%Eb\002C"
#define UI_TEXT_EXTR0_TEMP_FR "Temp. 1 :%e0/%E0\002C"
#define UI_TEXT_EXTR1_TEMP_FR "Temp. 2 :%e1/%E1\002C"
#define UI_TEXT_EXTR2_TEMP_FR "Temp. 2 :%e2/%E2\002C"
#define UI_TEXT_EXTR0_OFF_FR "Extrudeuse 1 Off"
#define UI_TEXT_EXTR1_OFF_FR "Extrudeuse 2 Off"
#define UI_TEXT_EXTR2_OFF_FR "Extrudeuse 3 Off"
#define UI_TEXT_EXTR0_SELECT_FR "%X0 Select. Extr. 1"
#define UI_TEXT_EXTR1_SELECT_FR "%X1 Select. Extr. 2"
#define UI_TEXT_EXTR2_SELECT_FR "%X1 Select. Extr. 3"
#define UI_TEXT_EXTR_ORIGIN_FR "Set Origin"
#define UI_TEXT_PRINT_X_FR "Imprim. X:%ax"
#define UI_TEXT_PRINT_Y_FR "Imprim. Y:%ay"
#define UI_TEXT_PRINT_Z_FR "Imprim. Z:%az"
#define UI_TEXT_PRINT_Z_DELTA_FR "Imprim.:%az"
#define UI_TEXT_MOVE_X_FR "Deplac. X:%aX"
#define UI_TEXT_MOVE_Y_FR "Deplac. Y:%aY"
#define UI_TEXT_MOVE_Z_FR "Deplac. Z:%aZ"
#define UI_TEXT_MOVE_Z_DELTA_FR "Deplac.:%aZ"
#define UI_TEXT_JERK_FR "Jerk:%aj"
#define UI_TEXT_ZJERK_FR "Z-Jerk:%aJ"
#define UI_TEXT_ACCELERATION_FR "Acceleration"
#define UI_TEXT_STORE_TO_EEPROM_FR "Stock. Dans EEPROM"
#define UI_TEXT_LOAD_EEPROM_FR "Charg. f. EEPROM"
#define UI_TEXT_DBG_ECHO_FR "Echo :%do"
#define UI_TEXT_DBG_INFO_FR "Info :%di"
#define UI_TEXT_DBG_ERROR_FR "Erreurs :%de"
#define UI_TEXT_DBG_DRYRUN_FR "Fonct. a Vide:%dd"
#define UI_TEXT_DBG_ENDSTOP_FR "Fin de course:%dp"
#define UI_TEXT_OPS_OFF_FR "%O0 OPS Off"
#define UI_TEXT_OPS_CLASSIC_FR "%O1 OPS Classiq."
#define UI_TEXT_OPS_FAST_FR "%O2 OPS Rapide"
#define UI_TEXT_OPS_RETRACT_FR "Retract. :%Or"
#define UI_TEXT_OPS_BACKSLASH_FR "Backsl. :%Ob"
#define UI_TEXT_OPS_MINDIST_FR "Min.dist:%Od"
#define UI_TEXT_OPS_MOVE_AFTER_FR "Déplac. Apres:%Oa"
#define UI_TEXT_ANTI_OOZE_FR "Anti Ooze"
#define UI_TEXT_PRINT_FILE_FR "Imprim. fichier"
#define UI_TEXT_PAUSE_PRINT_FR "Pause Impress."
#define UI_TEXT_CONTINUE_PRINT_FR "Continuer Impress."
#define UI_TEXT_UNMOUNT_CARD_FR "Retirer Carte"
#define UI_TEXT_MOUNT_CARD_FR "Inserer Carte"
#define UI_TEXT_DELETE_FILE_FR "Supp. fichier"
#define UI_TEXT_FEEDRATE_FR "Avance"
#define UI_TEXT_FEED_MAX_X_FR "Max X:%fx"
#define UI_TEXT_FEED_MAX_Y_FR "Max Y:%fy"
#define UI_TEXT_FEED_MAX_Z_FR "Max Z:%fz"
#define UI_TEXT_FEED_MAX_Z_DELTA_FR "Max:%fz"
#define UI_TEXT_FEED_HOME_X_FR "Accueil X:%fX"
#define UI_TEXT_FEED_HOME_Y_FR "Accueil Y:%fY"
#define UI_TEXT_FEED_HOME_Z_FR "Accueil Z:%fZ"
#define UI_TEXT_FEED_HOME_Z_DELTA_FR "Accueil:%fZ"
#define UI_TEXT_ACTION_XPOSITION4A_FR "X:%x0 mm %dx%dX"
#define UI_TEXT_ACTION_XPOSITION4B_FR "Min Butee:%sx"
#define UI_TEXT_ACTION_XPOSITION4C_FR "Max Butee:%sX"
#define UI_TEXT_ACTION_XPOSITION4D_FR ""
#define UI_TEXT_ACTION_YPOSITION4A_FR "Y:%x1 mm %dy%dY"
#define UI_TEXT_ACTION_YPOSITION4B_FR "Min Butee:%sy"
#define UI_TEXT_ACTION_YPOSITION4C_FR "Max Butee:%sY"
#define UI_TEXT_ACTION_YPOSITION4D_FR ""
#define UI_TEXT_ACTION_ZPOSITION4A_FR "Z:%x2 mm %dz%dZ"
#define UI_TEXT_ACTION_ZPOSITION4B_FR "Min Butee:%sz"
#define UI_TEXT_ACTION_ZPOSITION4C_FR "Max Butee:%sZ"
#define UI_TEXT_ACTION_ZPOSITION4D_FR ""
#define UI_TEXT_ACTION_XPOSITION_FAST4A_FR "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST4B_FR "Min Butee:%sx"
#define UI_TEXT_ACTION_XPOSITION_FAST4C_FR "Max Butee:%sX"
#define UI_TEXT_ACTION_XPOSITION_FAST4D_FR ""
#define UI_TEXT_ACTION_YPOSITION_FAST4A_FR "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST4B_FR "Min Butee:%sy"
#define UI_TEXT_ACTION_YPOSITION_FAST4C_FR "Max Butee:%sY"
#define UI_TEXT_ACTION_YPOSITION_FAST4D_FR ""
#define UI_TEXT_ACTION_ZPOSITION_FAST4A_FR "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST4B_FR "Min Butee:%sz"
#define UI_TEXT_ACTION_ZPOSITION_FAST4C_FR "Max Butee:%sZ"
#define UI_TEXT_ACTION_ZPOSITION_FAST4D_FR ""
#define UI_TEXT_ACTION_EPOSITION_FAST2A_FR "E:%x3 mm"
#define UI_TEXT_ACTION_EPOSITION_FAST2B_FR "1 clic = 1 mm"
#define UI_TEXT_ACTION_XPOSITION2A_FR "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION2B_FR "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION2A_FR "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION2B_FR "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION2A_FR "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION2B_FR "Min:%sz Max:%sZ"
#define UI_TEXT_ACTION_XPOSITION_FAST2A_FR "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST2B_FR "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION_FAST2A_FR "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST2B_FR "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION_FAST2A_FR "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST2B_FR "Min:%sz Max:%sZ"
#define UI_TEXT_FANSPEED_FR "Vit. Ventil."
#define UI_TEXT_ACTION_FANSPEED_FR "Vit. Ventil.:%Fs%%%"
#define UI_TEXT_FAN_OFF_FR "Arret Ventil."
#define UI_TEXT_FAN_25_FR "Ventil. 25%%%"
#define UI_TEXT_FAN_50_FR "Ventil. 50%%%"
#define UI_TEXT_FAN_75_FR "Ventil. 75%%%"
#define UI_TEXT_FAN_FULL_FR "Ventil. Max"
#define UI_TEXT_STEPPER_INACTIVE_FR "Arret Moteurs"
#define UI_TEXT_STEPPER_INACTIVE2A_FR "Dis. Apres: %is"
#define UI_TEXT_STEPPER_INACTIVE2B_FR "[min] 0=Off"
#define UI_TEXT_POWER_INACTIVE_FR "Arret Alim."
#define UI_TEXT_POWER_INACTIVE2A_FR "Dis. Apres: %ip"
#define UI_TEXT_POWER_INACTIVE2B_FR "[min] 0=Off"
#define UI_TEXT_GENERAL_FR "General"
#define UI_TEXT_BAUDRATE_FR "Baudrate:%oc"
#define UI_TEXT_EXTR_STEPS_FR "Pas/MM:%Se"
#define UI_TEXT_EXTR_START_FEED_FR "Start FR:%Xf"
#define UI_TEXT_EXTR_MAX_FEED_FR "Max FR:%XF"
#define UI_TEXT_EXTR_ACCEL_FR "Accel:%XA"
#define UI_TEXT_EXTR_WATCH_FR "Stab.Temps:%Xw"
#define UI_TEXT_EXTR_ADVANCE_L_FR "Avance lin:%Xl"
#define UI_TEXT_EXTR_ADVANCE_K_FR "Avance quad:%Xa"
#define UI_TEXT_EXTR_MANAGER_FR "Controle:%Xh"
#define UI_TEXT_EXTR_PGAIN_FR "PID P:%Xp"
#define UI_TEXT_EXTR_DEADTIME_FR "Temps Mort:%Xp"
#define UI_TEXT_EXTR_DMAX_DT_FR "PWM Control:%XM"
#define UI_TEXT_EXTR_IGAIN_FR "PID I:%Xi"
#define UI_TEXT_EXTR_DGAIN_FR "PID D:%Xd"
#define UI_TEXT_EXTR_DMIN_FR "Drive Min:%Xm"
#define UI_TEXT_EXTR_DMAX_FR "Drive Max:%XM"
#define UI_TEXT_EXTR_PMAX_FR "PID Max:%XD"
#define UI_TEXT_EXTR_XOFF_FR "X-Offset:%Xx"
#define UI_TEXT_EXTR_YOFF_FR "Y-Offset:%Xy"
#define UI_TEXT_STRING_HM_BANGBANG_FR "BangBang"
#define UI_TEXT_STRING_HM_PID_FR "PID"
#define UI_TEXT_STRING_ACTION_FR "Action:%la"
#define UI_TEXT_HEATING_EXTRUDER_FR "Chauff. Extrud."
#define UI_TEXT_HEATING_BED_FR "Chauff. Lit"
#define UI_TEXT_KILLED_FR "Stoppe"
#define UI_TEXT_STEPPER_DISABLED_FR "Moteurs Arretes"
#define UI_TEXT_EEPROM_STOREDA_FR "Configuration"
#define UI_TEXT_EEPROM_STOREDB_FR "Stock. Dans EEPROM"
#define UI_TEXT_EEPROM_LOADEDA_FR "Configuration"
#define UI_TEXT_EEPROM_LOADEDB_FR "Charg. f. EEPROM"
#define UI_TEXT_UPLOADING_FR "Telechargement.."
#define UI_TEXT_PAGE_BUFFER_FR "Tampon:%oB"
#define UI_TEXT_PAGE_EXTRUDER_FR " E:%ec/%Ec\002C\176%oC"
#define UI_TEXT_PAGE_EXTRUDER1_FR "E1:%e0/%E0\002C\176%o0"
#define UI_TEXT_PAGE_EXTRUDER2_FR "E2:%e1/%E1\002C\176%o1"
#define UI_TEXT_PAGE_EXTRUDER3_FR "E3:%e2/%E2\002C\176%o2"
#define UI_TEXT_PAGE_BED_FR " B:%eb/%Eb\002C\176%ob"
#define UI_TEXT_SPEED_MULTIPLY_FR "Vit. Mul.:%om%%%"
#define UI_TEXT_FLOW_MULTIPLY_FR "Flow Mul.:%of%%%"
#define UI_TEXT_SHOW_MEASUREMENT_FR "Montrer Mesure"
#define UI_TEXT_RESET_MEASUREMENT_FR "Reset Mesure"
#define UI_TEXT_SET_MEASURED_ORIGIN_FR "Regler Z=0"
#define UI_TEXT_ZCALIB_FR "Z Calib."
#define UI_TEXT_SET_P1_FR "Regler P1"
#define UI_TEXT_SET_P2_FR "Regler P2"
#define UI_TEXT_SET_P3_FR "Regler P3"
#define UI_TEXT_CALCULATE_LEVELING_FR "Calculer Nivellement"
#define UI_TEXT_LEVEL_FR "Niveau delta"
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP_FR "Att. Temp.%XT\002C"
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS_FR "Att. Units:%XUmm"
#define UI_TEXT_SD_REMOVED_FR "Carte SD retiree"
#define UI_TEXT_SD_INSERTED_FR "Carte SD inseree"
#define UI_TEXT_PRINTER_READY_FR "imprimante prete"
// Printtime output gets aggregated like <Days_5gisgits>UI_TEXT_PRINTTIME_DAYS<Hours>UI_TEXT_PRINTTIME_HOURS<Minutes>UI_TEXT_PRINTTIME_MINUTES
// ___88 days 12:45
#define UI_TEXT_PRINTTIME_DAYS_FR " jours "
#define UI_TEXT_PRINTTIME_HOURS_FR ":"
#define UI_TEXT_PRINTTIME_MINUTES_FR ""
#define UI_TEXT_PRINT_TIME_FR "Temps Impression"
#define UI_TEXT_PRINT_FILAMENT_FR "Filament Imprime"
#define UI_TEXT_PRINTED_FR "Imprime"
#define UI_TEXT_POWER_FR "ATX power on/off"
#define UI_TEXT_STRING_HM_DEADTIME_FR "Temps Mort"
#define UI_TEXT_STRING_HM_SLOWBANG_FR "Tout ou Rien"
#define UI_TEXT_STOP_PRINT_FR "Arret Impress."
#define UI_TEXT_Z_BABYSTEPPING_FR "Z Babystep.:%oYmm"
#define UI_TEXT_CHANGE_FILAMENT_FR "Changement Filament"
#define UI_TEXT_WIZ_CH_FILAMENT1_FR "Changement Filament"
#define UI_TEXT_WIZ_CH_FILAMENT2_FR "Tournez Deplacer"
#define UI_TEXT_WIZ_CH_FILAMENT3_FR "Filament haut/bas"
#define UI_TEXT_CLICK_DONE_FR "Continuer avec Clic"
#define UI_TEXT_AUTOLEVEL_ONOFF_FR "Autolevel: %ll"
#define UI_TEXT_SERVOPOS_FR "Pos. Servo: %oS"
#define UI_TEXT_IGNORE_M106_FR "Ignorer M106 %Fi"
#define UI_TEXT_WIZ_REHEAT1_FR "Cliquez pour"
#define UI_TEXT_WIZ_REHEAT2_FR "Rechauffer Extrud."
#define UI_TEXT_WIZ_WAITTEMP1_FR "Attendez Temp."
#define UI_TEXT_WIZ_WAITTEMP2_FR "cibles ..."
#define UI_TEXT_EXTRUDER_JAM_FR "Stockage d'Extrusion"
#define UI_TEXT_STANDBY_FR "Standby"
#define UI_TEXT_BED_COATING_FR "Revetement de Lit"
#define UI_TEXT_BED_COATING_SET1_FR "Revetement de Lit:"
#define UI_TEXT_BED_COATING_SET2_FR ""
#define UI_TEXT_NOCOATING_FR "Aucun Revetement"
#define UI_TEXT_BUILDTAK_FR "BuildTak"
#define UI_TEXT_KAPTON_FR "Kapton"
#define UI_TEXT_BLUETAPE_FR "Blue Tape"
#define UI_TEXT_PETTAPE_FR "Ruban vert PET"
#define UI_TEXT_GLUESTICK_FR "Baton de Colle"
#define UI_TEXT_CUSTOM_FR "Coutume"
#define UI_TEXT_COATING_CUSTOM_FR "Coutume:%BCmm"
#define UI_TEXT_LANGUAGE_FR "Langue"
#if NUM_EXTRUDER > 2 || MIXING_EXTRUDER != 0
#define UI_TEXT_MAINPAGE6_1_FR "\xa %ec/%Ec\xb0 X:%x0"
#else
#define UI_TEXT_MAINPAGE6_1_FR "\xa %e0/%E0\xb0 X:%x0"
#endif // NUM_EXTRUDER
#if NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_2_FR "\xa %e1/%E1\xb0 Y:%x1"
#elif HAVE_HEATED_BED
#define UI_TEXT_MAINPAGE6_2_FR "\xe %eb/%Eb\xb0 Y:%x1"
#else
#define UI_TEXT_MAINPAGE6_2_FR " Y:%x1"
#endif
#if HAVE_HEATED_BED && NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_3_FR "\xe %eb/%Eb\xb0 Z:%x2"
#elif FEATURE_DITTO_PRINTING
#define UI_TEXT_MAINPAGE6_3_FR "Copies: %ed Z:%x2"
#else
#define UI_TEXT_MAINPAGE6_3_FR "Flow:\xfd %of%%% Z:%x2"
#endif
#define UI_TEXT_MAINPAGE6_4_FR "Mul: %om%%% \xfd E: %x4m"
#define UI_TEXT_MAINPAGE6_5_FR "Buf: %oB"
#define UI_TEXT_MAINPAGE6_6_FR "%os"
#define UI_TEXT_MAINPAGE_TEMP_BED_FR cTEMP "%ec/%Ec" cDEG "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_BED_FR "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_Z_BUF_FR "Z:%x2 Buf : %oB"
#define UI_TEXT_MAINPAGE_MUL_EUSAGE_FR "Mul: %om E:%x4"
#define UI_TEXT_MAINPAGE_XY_FR "X:%x0 Y:%x1"
#define UI_TEXT_PRINT_TIME_VALUE_FR "%Ut"
#define UI_TEXT_PRINT_FILAMENT_VALUE_FR "%Uf m"
#define UI_TEXT_METER_PRINTED_FR "%Uf m " UI_TEXT_PRINTED_FR
#define UI_TEXT_STATUS_FR "%os"
#define UI_TEXT_EMPTY_FR ""
#define UI_TEXT_TEMP_SET_FR cTEMP "%ec/%Ec" cDEG
#define UI_TEXT_CURRENT_TEMP_FR cTEMP "%ec" cDEG
#define UI_TEXT_COATING_THICKNESS_FR " %BCmm"
#define UI_TEXT_EXTR3_TEMP_FR "Temp. 4 :%e3/%E3" cDEG "C"
#define UI_TEXT_EXTR4_TEMP_FR "Temp. 5 :%e4/%E4" cDEG "C"
#define UI_TEXT_EXTR5_TEMP_FR "Temp. 6 :%e5/%E5" cDEG "C"
#define UI_TEXT_EXTR3_OFF_FR "Extrudeuse 4 Off"
#define UI_TEXT_EXTR4_OFF_FR "Extrudeuse 5 Off"
#define UI_TEXT_EXTR5_OFF_FR "Extrudeuse 6 Off"
#define UI_TEXT_EXTR3_SELECT_FR "%X3 Select. Extr. 4"
#define UI_TEXT_EXTR4_SELECT_FR "%X4 Select. Extr. 5"
#define UI_TEXT_EXTR5_SELECT_FR "%X5 Select. Extr. 6"
#define UI_TEXT_DITTO_0_FR "%D0 Aucune Copie"
#define UI_TEXT_DITTO_1_FR "%D1 1 Copie"
#define UI_TEXT_DITTO_2_FR "%D2 2 Copies"
#define UI_TEXT_DITTO_3_FR "%D3 3 Copies"
#define UI_TEXT_ZPROBE_HEIGHT_FR "Hauteur Z-Sonde:%zh"
#define UI_TEXT_OFFSETS_FR "Set print offsets"
#define UI_TEXT_X_OFFSET_FR "Set X offset:%T0mm"
#define UI_TEXT_Y_OFFSET_FR "Set Y offset:%T1mm"
#define UI_TEXT_Z_OFFSET_FR "Set Z offset:%T2mm"
// *************** Czech translation ****************
// *************** By Majkl ****************
// version: 2014/08/27
#define UI_TEXT_ON_CZ "Zap"
#define UI_TEXT_OFF_CZ "Vyp"
#define UI_TEXT_NA_CZ "neni" // Output for not available
#define UI_TEXT_YES_CZ "Ano"
#define UI_TEXT_NO_CZ "Ne"
#define UI_TEXT_PRINT_POS_CZ "Tisknu..."
#define UI_TEXT_PRINTING_CZ "Tisknu"
#define UI_TEXT_IDLE_CZ "V klidu"
#define UI_TEXT_NOSDCARD_CZ "Neni SD karta"
#define UI_TEXT_ERROR_CZ "**** CHYBA ****"
#define UI_TEXT_BACK_CZ "Zpet \001"
#define UI_TEXT_QUICK_SETTINGS_CZ "Zakladni nastaveni"
#define UI_TEXT_ERRORMSG_CZ "%oe"
#define UI_TEXT_CONFIGURATION_CZ "Nastaveni"
#define UI_TEXT_POSITION_CZ "Pozice"
#define UI_TEXT_EXTRUDER_CZ "Extruder"
#define UI_TEXT_SD_CARD_CZ "SD karta"
#define UI_TEXT_DEBUGGING_CZ "Debug"
#define UI_TEXT_HOME_DELTA_CZ "Home delta"
#define UI_TEXT_HOME_ALL_CZ "Home vsech"
#define UI_TEXT_HOME_X_CZ "Home X"
#define UI_TEXT_HOME_Y_CZ "Home Y"
#define UI_TEXT_HOME_Z_CZ "Home Z"
#define UI_TEXT_PREHEAT_PLA_CZ "Ohrat pro PLA"
#define UI_TEXT_PREHEAT_ABS_CZ "Ohrat pro ABS"
#define UI_TEXT_LIGHTS_ONOFF_CZ "Svetla:%lo"
#define UI_TEXT_COOLDOWN_CZ "Zchladit"
#define UI_TEXT_SET_TO_ORIGIN_CZ "Nastavit pocatek"
#define UI_TEXT_DISABLE_STEPPER_CZ "Vypnout motory"
#define UI_TEXT_X_POSITION_CZ "X pozice"
#define UI_TEXT_X_POS_FAST_CZ "X rychle"
#define UI_TEXT_Y_POSITION_CZ "Y pozice"
#define UI_TEXT_Y_POS_FAST_CZ "Y rychle"
#define UI_TEXT_Z_POSITION_CZ "Z pozice"
#define UI_TEXT_Z_POS_FAST_CZ "Z rychle"
#define UI_TEXT_E_POSITION_CZ "Pozice extruderu"
#define UI_TEXT_BED_TEMP_CZ "Teplota desky: %Eb\002C"
#define UI_TEXT_EXTR0_TEMP_CZ "Teplota 1:%e0/%E0\002C"
#define UI_TEXT_EXTR1_TEMP_CZ "Teplota 2:%e1/%E1\002C"
#define UI_TEXT_EXTR2_TEMP_CZ "Teplota 3:%e2/%E2\002C"
#define UI_TEXT_EXTR0_OFF_CZ "Extruder 1 vyp."
#define UI_TEXT_EXTR1_OFF_CZ "Extruder 2 vyp."
#define UI_TEXT_EXTR2_OFF_CZ "Extruder 3 vyp."
#define UI_TEXT_EXTR0_SELECT_CZ "%X0 Zvolit Extr. 1"
#define UI_TEXT_EXTR1_SELECT_CZ "%X1 Zvolit Extr. 2"
#define UI_TEXT_EXTR2_SELECT_CZ "%X1 Zvolit Extr. 3"
#define UI_TEXT_EXTR_ORIGIN_CZ "Nastavit pocatek"
#define UI_TEXT_PRINT_X_CZ "Tisk X:%ax"
#define UI_TEXT_PRINT_Y_CZ "Tisk Y:%ay"
#define UI_TEXT_PRINT_Z_CZ "Tisk Z:%az"
#define UI_TEXT_PRINT_Z_DELTA_CZ "Tisk:%az"
#define UI_TEXT_MOVE_X_CZ "Posun X:%aX"
#define UI_TEXT_MOVE_Y_CZ "Posun Y:%aY"
#define UI_TEXT_MOVE_Z_CZ "Posun Z:%aZ"
#define UI_TEXT_MOVE_Z_DELTA_CZ "Posun:%aZ"
#define UI_TEXT_JERK_CZ "Jerk:%aj"
#define UI_TEXT_ZJERK_CZ "Z-Jerk:%aJ"
#define UI_TEXT_ACCELERATION_CZ "Akcelerace"
#define UI_TEXT_STORE_TO_EEPROM_CZ "Ulozit do EEPROM"
#define UI_TEXT_LOAD_EEPROM_CZ "Nahrat z EEPROM"
#define UI_TEXT_DBG_ECHO_CZ "Echo :%do"
#define UI_TEXT_DBG_INFO_CZ "Info :%di"
#define UI_TEXT_DBG_ERROR_CZ "Chyby :%de"
#define UI_TEXT_DBG_DRYRUN_CZ "Beh nanecisto:%dd"
#define UI_TEXT_DBG_ENDSTOP_CZ "EndStop:%dp"
#define UI_TEXT_OPS_OFF_CZ "%O0 OPS Vypnuto"
#define UI_TEXT_OPS_CLASSIC_CZ "%O1 OPS Klasicke"
#define UI_TEXT_OPS_FAST_CZ "%O2 OPS Rychle"
#define UI_TEXT_OPS_RETRACT_CZ "Retrakce :%Or"
#define UI_TEXT_OPS_BACKSLASH_CZ "Vule. :%Ob"
#define UI_TEXT_OPS_MINDIST_CZ "Min.vzd,:%Od"
#define UI_TEXT_OPS_MOVE_AFTER_CZ "Posunuti po:%Oa"
#define UI_TEXT_ANTI_OOZE_CZ "Proti kapani"
#define UI_TEXT_PRINT_FILE_CZ "Tisknout soubor"
#define UI_TEXT_PAUSE_PRINT_CZ "Pozastavit tisk"
#define UI_TEXT_CONTINUE_PRINT_CZ "Pokracovani tisku"
#define UI_TEXT_UNMOUNT_CARD_CZ "Odpojit kartu"
#define UI_TEXT_MOUNT_CARD_CZ "Pripojit kartu"
#define UI_TEXT_DELETE_FILE_CZ "Smazat soubor"
#define UI_TEXT_FEEDRATE_CZ "Rychlost"
#define UI_TEXT_FEED_MAX_X_CZ "Max X:%fx"
#define UI_TEXT_FEED_MAX_Y_CZ "Max Y:%fy"
#define UI_TEXT_FEED_MAX_Z_CZ "Max Z:%fz"
#define UI_TEXT_FEED_MAX_Z_DELTA_CZ "Max:%fz"
#define UI_TEXT_FEED_HOME_X_CZ "Home X:%fX"
#define UI_TEXT_FEED_HOME_Y_CZ "Home Y:%fY"
#define UI_TEXT_FEED_HOME_Z_CZ "Home Z:%fZ"
#define UI_TEXT_FEED_HOME_Z_DELTA_CZ "Home:%fZ"
#define UI_TEXT_ACTION_XPOSITION4A_CZ "X:%x0 mm %dx%dX"
#define UI_TEXT_ACTION_XPOSITION4B_CZ "Min koncak:%sx"
#define UI_TEXT_ACTION_XPOSITION4C_CZ "Max koncak:%sX"
#define UI_TEXT_ACTION_XPOSITION4D_CZ ""
#define UI_TEXT_ACTION_YPOSITION4A_CZ "Y:%x1 mm %dy%dY"
#define UI_TEXT_ACTION_YPOSITION4B_CZ "Min koncak:%sy"
#define UI_TEXT_ACTION_YPOSITION4C_CZ "Max koncak:%sY"
#define UI_TEXT_ACTION_YPOSITION4D_CZ ""
#define UI_TEXT_ACTION_ZPOSITION4A_CZ "Z:%x2 mm %dz%dZ"
#define UI_TEXT_ACTION_ZPOSITION4B_CZ "Min koncak:%sz"
#define UI_TEXT_ACTION_ZPOSITION4C_CZ "Max koncak:%sZ"
#define UI_TEXT_ACTION_ZPOSITION4D_CZ ""
#define UI_TEXT_ACTION_XPOSITION_FAST4A_CZ "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST4B_CZ "Min koncak:%sx"
#define UI_TEXT_ACTION_XPOSITION_FAST4C_CZ "Max koncak:%sX"
#define UI_TEXT_ACTION_XPOSITION_FAST4D_CZ ""
#define UI_TEXT_ACTION_YPOSITION_FAST4A_CZ "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST4B_CZ "Min koncak:%sy"
#define UI_TEXT_ACTION_YPOSITION_FAST4C_CZ "Max koncak:%sY"
#define UI_TEXT_ACTION_YPOSITION_FAST4D_CZ ""
#define UI_TEXT_ACTION_ZPOSITION_FAST4A_CZ "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST4B_CZ "Min koncak:%sz"
#define UI_TEXT_ACTION_ZPOSITION_FAST4C_CZ "Max koncak:%sZ"
#define UI_TEXT_ACTION_ZPOSITION_FAST4D_CZ ""
#define UI_TEXT_ACTION_EPOSITION_FAST2A_CZ "E:%x3 mm"
#define UI_TEXT_ACTION_EPOSITION_FAST2B_CZ "1 kliknuti = 1 mm"
#define UI_TEXT_ACTION_XPOSITION2A_CZ "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION2B_CZ "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION2A_CZ "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION2B_CZ "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION2A_CZ "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION2B_CZ "Min:%sz Max:%sZ"
#define UI_TEXT_ACTION_XPOSITION_FAST2A_CZ "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST2B_CZ "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION_FAST2A_CZ "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST2B_CZ "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION_FAST2A_CZ "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST2B_CZ "Min:%sz Max:%sZ"
#define UI_TEXT_FANSPEED_CZ "Rychlost vetraku"
#define UI_TEXT_ACTION_FANSPEED_CZ "Aktualni rychlost:%Fs%%%"
#define UI_TEXT_FAN_OFF_CZ "Vypnout"
#define UI_TEXT_FAN_25_CZ "Vetrak na 25%%%"
#define UI_TEXT_FAN_50_CZ "Vetrak na 50%%%"
#define UI_TEXT_FAN_75_CZ "Vetrak na 75%%%"
#define UI_TEXT_FAN_FULL_CZ "Vetrak na plno"
#define UI_TEXT_STEPPER_INACTIVE_CZ "Neaktivni motory"
#define UI_TEXT_STEPPER_INACTIVE2A_CZ "Vypnout po :%i m"
#define UI_TEXT_STEPPER_INACTIVE2B_CZ "[min] 0=Off"
#define UI_TEXT_POWER_INACTIVE_CZ "Max. neaktivni"
#define UI_TEXT_POWER_INACTIVE2A_CZ "Vypnout po: %i m"
#define UI_TEXT_POWER_INACTIVE2B_CZ "[min] 0=Off"
#define UI_TEXT_GENERAL_CZ "Zakladni"
#define UI_TEXT_BAUDRATE_CZ "Rychlost:%oc"
#define UI_TEXT_EXTR_STEPS_CZ "kroku/MM:%Se"
#define UI_TEXT_EXTR_START_FEED_CZ "Start FR:%Xf"
#define UI_TEXT_EXTR_MAX_FEED_CZ "Max FR:%XF"
#define UI_TEXT_EXTR_ACCEL_CZ "Zrychl.:%XA"
#define UI_TEXT_EXTR_WATCH_CZ "Stab.cas:%Xw"
#define UI_TEXT_EXTR_ADVANCE_L_CZ "Rozsir. lin:%Xl"
#define UI_TEXT_EXTR_ADVANCE_K_CZ "Rozsir. quad:%Xa"
#define UI_TEXT_EXTR_MANAGER_CZ "Control:%Xh"
#define UI_TEXT_EXTR_PGAIN_CZ "PID P:%Xp"
#define UI_TEXT_EXTR_DEADTIME_CZ "Mrtva doba:%Xp"
#define UI_TEXT_EXTR_DMAX_DT_CZ "Ovladani PWM:%XM"
#define UI_TEXT_EXTR_IGAIN_CZ "PID I:%Xi"
#define UI_TEXT_EXTR_DGAIN_CZ "PID D:%Xd"
#define UI_TEXT_EXTR_DMIN_CZ "Drive Min:%Xm"
#define UI_TEXT_EXTR_DMAX_CZ "Drive Max:%XM"
#define UI_TEXT_EXTR_PMAX_CZ "PID Max:%XD"
#define UI_TEXT_EXTR_XOFF_CZ "X-Offset:%Xx"
#define UI_TEXT_EXTR_YOFF_CZ "Y-Offset:%Xy"
#define UI_TEXT_STRING_HM_BANGBANG_CZ "BangBang"
#define UI_TEXT_STRING_HM_PID_CZ "PID"
#define UI_TEXT_STRING_ACTION_CZ "Akce:%la"
#define UI_TEXT_HEATING_EXTRUDER_CZ "Ohrivani extruderu"
#define UI_TEXT_HEATING_BED_CZ "Ohrivani desky"
#define UI_TEXT_KILLED_CZ "Zastaveno"
#define UI_TEXT_STEPPER_DISABLED_CZ "Motor vypnut"
#define UI_TEXT_EEPROM_STOREDA_CZ "Konfigurace"
#define UI_TEXT_EEPROM_STOREDB_CZ "Ulozena v EEPROM"
#define UI_TEXT_EEPROM_LOADEDA_CZ "Konfigurace"
#define UI_TEXT_EEPROM_LOADEDB_CZ "Nactena z EEPROM"
#define UI_TEXT_UPLOADING_CZ "Nahravam..."
#define UI_TEXT_PAGE_BUFFER_CZ "Buffer:%oB"
#define UI_TEXT_PAGE_EXTRUDER_CZ " E:%ec/%Ec\002C\176%oC"
#define UI_TEXT_PAGE_EXTRUDER1_CZ "E1:%e0/%E0\002C\176%o0"
#define UI_TEXT_PAGE_EXTRUDER2_CZ "E2:%e1/%E1\002C\176%o1"
#define UI_TEXT_PAGE_EXTRUDER3_CZ "E3:%e2/%E2\002C\176%o2"
#define UI_TEXT_PAGE_BED_CZ " B:%eb/%Eb\002C\176%ob"
#define UI_TEXT_SPEED_MULTIPLY_CZ "Rychlost:%om%%%"
#define UI_TEXT_FLOW_MULTIPLY_CZ "Flow nasobit:%of%%%"
#define UI_TEXT_SHOW_MEASUREMENT_CZ "Ukazat merení"
#define UI_TEXT_RESET_MEASUREMENT_CZ "Obnovit mereni"
#define UI_TEXT_SET_MEASURED_ORIGIN_CZ "Set Z=0"
#define UI_TEXT_ZCALIB_CZ "Z kalib."
#define UI_TEXT_SET_P1_CZ "Set P1"
#define UI_TEXT_SET_P2_CZ "Set P2"
#define UI_TEXT_SET_P3_CZ "Set P3"
#define UI_TEXT_CALCULATE_LEVELING_CZ "Vypocitat leveling"
#define UI_TEXT_LEVEL_CZ "Level delta"
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP_CZ "Tepl. cekani%XT\002C"
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS_CZ "Jedn. cekani:%XUmm"
#define UI_TEXT_SD_REMOVED_CZ "SD karta vyjmuta."
#define UI_TEXT_SD_INSERTED_CZ "Vlozena SD karta"
#define UI_TEXT_PRINTER_READY_CZ "Tiskarna OK"
// Printtime output gets aggregated like <Days_5gisgits>UI_TEXT_PRINTTIME_DAYS<Hours>UI_TEXT_PRINTTIME_HOURS<Minutes>UI_TEXT_PRINTTIME_MINUTES
// ___88 days 12:45
#define UI_TEXT_PRINTTIME_DAYS_CZ " dnu "
#define UI_TEXT_PRINTTIME_HOURS_CZ ":"
#define UI_TEXT_PRINTTIME_MINUTES_CZ ""
#define UI_TEXT_PRINT_TIME_CZ "Cas tisku"
#define UI_TEXT_PRINT_FILAMENT_CZ "Filament tisteny"
#define UI_TEXT_PRINTED_CZ "Protisknuto"
#define UI_TEXT_POWER_CZ "Zapnout ATX zdroj"
#define UI_TEXT_STRING_HM_DEADTIME_CZ "Dead Time"
#define UI_TEXT_STRING_HM_SLOWBANG_CZ "SlowBang"
#define UI_TEXT_STOP_PRINT_CZ "Zastavit tisk"
#define UI_TEXT_Z_BABYSTEPPING_CZ "Z babystep.:%oYmm"
#define UI_TEXT_CHANGE_FILAMENT_CZ "Zmena filament"
#define UI_TEXT_WIZ_CH_FILAMENT1_CZ "Zmena filament"
#define UI_TEXT_WIZ_CH_FILAMENT2_CZ "Otocit se pohybovat"
#define UI_TEXT_WIZ_CH_FILAMENT3_CZ "vlaken nahoru/dolu"
#define UI_TEXT_CLICK_DONE_CZ "Pokr. s cvaknutim"
#define UI_TEXT_AUTOLEVEL_ONOFF_CZ "Autolevel: %ll"
#define UI_TEXT_SERVOPOS_CZ "Servo pozice: %oS"
#define UI_TEXT_IGNORE_M106_CZ "Ignorovat M106 %Fi"
#define UI_TEXT_WIZ_REHEAT1_CZ "Klikněte ohrat"
#define UI_TEXT_WIZ_REHEAT2_CZ "extruders."
#define UI_TEXT_WIZ_WAITTEMP1_CZ "Pockejte na cilove"
#define UI_TEXT_WIZ_WAITTEMP2_CZ "teploty ..."
#define UI_TEXT_EXTRUDER_JAM_CZ "Extruder jam"
#define UI_TEXT_STANDBY_CZ "Standby"
#define UI_TEXT_BED_COATING_CZ "Postel nater"
#define UI_TEXT_BED_COATING_SET1_CZ "Postel nater:"
#define UI_TEXT_BED_COATING_SET2_CZ ""
#define UI_TEXT_NOCOATING_CZ "No nater"
#define UI_TEXT_BUILDTAK_CZ "BuildTak"
#define UI_TEXT_KAPTON_CZ "Kapton"
#define UI_TEXT_BLUETAPE_CZ "Modra mask. paska"
#define UI_TEXT_PETTAPE_CZ "Zelena PET paska"
#define UI_TEXT_GLUESTICK_CZ "Lepici tycinka"
#define UI_TEXT_CUSTOM_CZ "Vlastni"
#define UI_TEXT_COATING_CUSTOM_CZ "Vlastni:%BCmm"
#define UI_TEXT_LANGUAGE_CZ "Jazyk"
#if NUM_EXTRUDER > 2 || MIXING_EXTRUDER != 0
#define UI_TEXT_MAINPAGE6_1_CZ "\xa %ec/%Ec\xb0 X:%x0"
#else
#define UI_TEXT_MAINPAGE6_1_CZ "\xa %e0/%E0\xb0 X:%x0"
#endif // NUM_EXTRUDER
#if NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_2_CZ "\xa %e1/%E1\xb0 Y:%x1"
#elif HAVE_HEATED_BED
#define UI_TEXT_MAINPAGE6_2_CZ "\xe %eb/%Eb\xb0 Y:%x1"
#else
#define UI_TEXT_MAINPAGE6_2_CZ " Y:%x1"
#endif
#if HAVE_HEATED_BED && NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_3_CZ "\xe %eb/%Eb\xb0 Z:%x2"
#elif FEATURE_DITTO_PRINTING
#define UI_TEXT_MAINPAGE6_3_CZ "Kopii: %ed Z:%x2"
#else
#define UI_TEXT_MAINPAGE6_3_CZ "Flow:\xfd %of%%% Z:%x2"
#endif
#define UI_TEXT_MAINPAGE6_4_CZ "Mul: %om%%% \xfd E: %x4m"
#define UI_TEXT_MAINPAGE6_5_CZ "Buf: %oB"
#define UI_TEXT_MAINPAGE6_6_CZ "%os"
#define UI_TEXT_MAINPAGE_TEMP_BED_CZ cTEMP "%ec/%Ec" cDEG "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_BED_CZ "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_Z_BUF_CZ "Z:%x2 Buf : %oB"
#define UI_TEXT_MAINPAGE_MUL_EUSAGE_CZ "Mul: %om E:%x4"
#define UI_TEXT_MAINPAGE_XY_CZ "X:%x0 Y:%x1"
#define UI_TEXT_PRINT_TIME_VALUE_CZ "%Ut"
#define UI_TEXT_PRINT_FILAMENT_VALUE_CZ "%Uf m"
#define UI_TEXT_METER_PRINTED_CZ "%Uf m " UI_TEXT_PRINTED_CZ
#define UI_TEXT_STATUS_CZ "%os"
#define UI_TEXT_EMPTY_CZ ""
#define UI_TEXT_TEMP_SET_CZ cTEMP "%ec/%Ec" cDEG
#define UI_TEXT_CURRENT_TEMP_CZ cTEMP "%ec" cDEG
#define UI_TEXT_COATING_THICKNESS_CZ " %BCmm"
#define UI_TEXT_EXTR3_TEMP_CZ "Teplota 4:%e3/%E3" cDEG "C"
#define UI_TEXT_EXTR4_TEMP_CZ "Teplota 5:%e4/%E4" cDEG "C"
#define UI_TEXT_EXTR5_TEMP_CZ "Teplota 6:%e5/%E5" cDEG "C"
#define UI_TEXT_EXTR3_OFF_CZ "Extruder 4 vyp."
#define UI_TEXT_EXTR4_OFF_CZ "Extruder 5 vyp."
#define UI_TEXT_EXTR5_OFF_CZ "Extruder 6 vyp."
#define UI_TEXT_EXTR3_SELECT_CZ "%X3 Zvolit Extr. 4"
#define UI_TEXT_EXTR4_SELECT_CZ "%X4 Zvolit Extr. 5"
#define UI_TEXT_EXTR5_SELECT_CZ "%X5 Zvolit Extr. 6"
#define UI_TEXT_DITTO_0_CZ "%D0 Zadne Kopie"
#define UI_TEXT_DITTO_1_CZ "%D1 1 Kopie"
#define UI_TEXT_DITTO_2_CZ "%D2 2 Kopii"
#define UI_TEXT_DITTO_3_CZ "%D3 3 Kopii"
#define UI_TEXT_ZPROBE_HEIGHT_CZ "Vyska z-test:%zh"
#define UI_TEXT_OFFSETS_CZ "Set print offsets"
#define UI_TEXT_X_OFFSET_CZ "Set X offset:%T0mm"
#define UI_TEXT_Y_OFFSET_CZ "Set Y offset:%T1mm"
#define UI_TEXT_Z_OFFSET_CZ "Set Z offset:%T2mm"
// *************** Polish translation ****************
// *************** By MIS ****************
// version: 2015/01/18
#define UI_TEXT_ON_PL "Zal"
#define UI_TEXT_OFF_PL "Wyl"
#define UI_TEXT_NA_PL "Brak" // Output for not available
#define UI_TEXT_YES_PL "Tak"
#define UI_TEXT_NO_PL "Nie"
#define UI_TEXT_PRINT_POS_PL "Drukowanie..."
#define UI_TEXT_PRINTING_PL "Drukowanie"
#define UI_TEXT_IDLE_PL "Wolna"
#define UI_TEXT_NOSDCARD_PL "Brak karty SD"
#define UI_TEXT_ERROR_PL "**** BLAD ****"
#define UI_TEXT_BACK_PL "Powrot " cUP
#define UI_TEXT_QUICK_SETTINGS_PL "Szybkie ustawienia"
#define UI_TEXT_ERRORMSG_PL "%oe"
#define UI_TEXT_CONFIGURATION_PL "Konfiguracja"
#define UI_TEXT_POSITION_PL "Pozycja"
#define UI_TEXT_EXTRUDER_PL "Ekstruder"
#define UI_TEXT_SD_CARD_PL "Karta SD"
#define UI_TEXT_DEBUGGING_PL "Testowanie"
#define UI_TEXT_HOME_DELTA_PL "Home delta"
#define UI_TEXT_HOME_ALL_PL "Zeruj wszystkie osie"
#define UI_TEXT_HOME_X_PL "Zeruj X"
#define UI_TEXT_HOME_Y_PL "Zeruj Y"
#define UI_TEXT_HOME_Z_PL "Zeruj Z"
#define UI_TEXT_PREHEAT_PLA_PL "Rozgrzej PLA"
#define UI_TEXT_PREHEAT_ABS_PL "Rozgrzej ABS"
#define UI_TEXT_LIGHTS_ONOFF_PL "Oswietlenie :%lo"
#define UI_TEXT_COOLDOWN_PL "Chlodzenie"
#define UI_TEXT_SET_TO_ORIGIN_PL "Ustaw jako zero"
#define UI_TEXT_DISABLE_STEPPER_PL "Wylacz silniki"
#define UI_TEXT_X_POSITION_PL "Pozycja X"
#define UI_TEXT_X_POS_FAST_PL "Pozycja X Szybko"
#define UI_TEXT_Y_POSITION_PL "Pozycja Y"
#define UI_TEXT_Y_POS_FAST_PL "Pozycja Y Szybko"
#define UI_TEXT_Z_POSITION_PL "Pozycja Z"
#define UI_TEXT_Z_POS_FAST_PL "Pozycja Z Szybko"
#define UI_TEXT_E_POSITION_PL "Pozycja Extrudera"
#define UI_TEXT_BED_TEMP_PL "Temp.Stolu:%eb/%Eb" cDEG "C"
#define UI_TEXT_EXTR0_TEMP_PL "Temp.Ex1:%e0/%E0" cDEG "C"
#define UI_TEXT_EXTR1_TEMP_PL "Temp.Ex2:%e1/%E1" cDEG "C"
#define UI_TEXT_EXTR2_TEMP_PL "Temp.Ex3:%e2/%E2" cDEG "C"
#define UI_TEXT_EXTR0_OFF_PL "Wyl. Extruder 1"
#define UI_TEXT_EXTR1_OFF_PL "Wyl. Extruder 2"
#define UI_TEXT_EXTR2_OFF_PL "Wyl. Extruder 3"
#define UI_TEXT_EXTR0_SELECT_PL "%X0 Wybierz Extr. 1"
#define UI_TEXT_EXTR1_SELECT_PL "%X1 Wybierz Extr. 2"
#define UI_TEXT_EXTR2_SELECT_PL "%X1 Wybierz Extr. 3"
#define UI_TEXT_EXTR_ORIGIN_PL "Ustaw jako zero"
#define UI_TEXT_PRINT_X_PL "Drukow. X :%ax"
#define UI_TEXT_PRINT_Y_PL "Drukow. Y :%ay"
#define UI_TEXT_PRINT_Z_PL "Drukow. Z :%az"
#define UI_TEXT_PRINT_Z_DELTA_PL "Drukowania :%az"
#define UI_TEXT_MOVE_X_PL "Przesuw. X :%aX"
#define UI_TEXT_MOVE_Y_PL "Przesuw. Y :%aY"
#define UI_TEXT_MOVE_Z_PL "Przesuw. Z :%aZ"
#define UI_TEXT_MOVE_Z_DELTA_PL "Przesuwania :%aZ"
#define UI_TEXT_JERK_PL "Jerk:%aj"
#define UI_TEXT_ZJERK_PL "Z-Jerk:%aJ"
#define UI_TEXT_ACCELERATION_PL "Przyspieszenie"
#define UI_TEXT_STORE_TO_EEPROM_PL "Zapisz do EEPROM"
#define UI_TEXT_LOAD_EEPROM_PL "Odczyt z EEPROM"
#define UI_TEXT_DBG_ECHO_PL "Echo : %do"
#define UI_TEXT_DBG_INFO_PL "Informacje : %di"
#define UI_TEXT_DBG_ERROR_PL "Bledy : %de"
#define UI_TEXT_DBG_DRYRUN_PL "Bez wydruku : %dd"
#define UI_TEXT_DBG_ENDSTOP_PL "EndStop : %dp"
#define UI_TEXT_OPS_OFF_PL "%O0 OPS Off"
#define UI_TEXT_OPS_CLASSIC_PL "%O1 OPS Classic"
#define UI_TEXT_OPS_FAST_PL "%O2 OPS Fast"
#define UI_TEXT_OPS_RETRACT_PL "Retract :%Or"
#define UI_TEXT_OPS_BACKSLASH_PL "Backsl. :%Ob"
#define UI_TEXT_OPS_MINDIST_PL "Min.dist:%Od"
#define UI_TEXT_OPS_MOVE_AFTER_PL "Przesun po:%Oa"
#define UI_TEXT_ANTI_OOZE_PL "Anti Ooze"
#define UI_TEXT_PRINT_FILE_PL "Drukuj z pliku"
#define UI_TEXT_PAUSE_PRINT_PL "Wstrzymaj druk"
#define UI_TEXT_CONTINUE_PRINT_PL "Wznow drukow."
#define UI_TEXT_UNMOUNT_CARD_PL "Odmontuj karte"
#define UI_TEXT_MOUNT_CARD_PL "Zamontuj karte"
#define UI_TEXT_DELETE_FILE_PL "Usun plik"
#define UI_TEXT_FEEDRATE_PL "Szybkosc"
#define UI_TEXT_FEED_MAX_X_PL "Max X:%fx"
#define UI_TEXT_FEED_MAX_Y_PL "Max Y:%fy"
#define UI_TEXT_FEED_MAX_Z_PL "Max Z:%fz"
#define UI_TEXT_FEED_MAX_Z_DELTA_PL "Max:%fz"
#define UI_TEXT_FEED_HOME_X_PL "Powrot X:%fX"
#define UI_TEXT_FEED_HOME_Y_PL "Powrot Y:%fY"
#define UI_TEXT_FEED_HOME_Z_PL "Powrot Z:%fZ"
#define UI_TEXT_FEED_HOME_Z_DELTA_PL "Powrot:%fZ"
#define UI_TEXT_ACTION_XPOSITION4A_PL "X:%x0 mm %dx%dX"
#define UI_TEXT_ACTION_XPOSITION4B_PL "Krancowka MIN: %sx"
#define UI_TEXT_ACTION_XPOSITION4C_PL "Krancowka MAX: %sX"
#define UI_TEXT_ACTION_XPOSITION4D_PL ""
#define UI_TEXT_ACTION_YPOSITION4A_PL "Y:%x1 mm %dy%dY"
#define UI_TEXT_ACTION_YPOSITION4B_PL "Krancowka MIN: %sy"
#define UI_TEXT_ACTION_YPOSITION4C_PL "Krancowka Max: %sY"
#define UI_TEXT_ACTION_YPOSITION4D_PL ""
#define UI_TEXT_ACTION_ZPOSITION4A_PL "Z:%x2 mm %dz%dZ"
#define UI_TEXT_ACTION_ZPOSITION4B_PL "Krancowka MIN: %sz"
#define UI_TEXT_ACTION_ZPOSITION4C_PL "Krancowka Max: %sZ"
#define UI_TEXT_ACTION_ZPOSITION4D_PL ""
#define UI_TEXT_ACTION_XPOSITION_FAST4A_PL "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST4B_PL "Krancowka MIN: %sx"
#define UI_TEXT_ACTION_XPOSITION_FAST4C_PL "Krancowka MAX: %sX"
#define UI_TEXT_ACTION_XPOSITION_FAST4D_PL ""
#define UI_TEXT_ACTION_YPOSITION_FAST4A_PL "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST4B_PL "Krancowka MIN: %sy"
#define UI_TEXT_ACTION_YPOSITION_FAST4C_PL "Krancowka MAX: %sY"
#define UI_TEXT_ACTION_YPOSITION_FAST4D_PL ""
#define UI_TEXT_ACTION_ZPOSITION_FAST4A_PL "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST4B_PL "Krancowka MIN: %sz"
#define UI_TEXT_ACTION_ZPOSITION_FAST4C_PL "Krancowka MAX: %sZ"
#define UI_TEXT_ACTION_ZPOSITION_FAST4D_PL ""
#define UI_TEXT_ACTION_EPOSITION_FAST2A_PL "E:%x3 mm"
#define UI_TEXT_ACTION_EPOSITION_FAST2B_PL "Jednostka 1 mm"
#define UI_TEXT_ACTION_XPOSITION2A_PL "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION2B_PL "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION2A_PL "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION2B_PL "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION2A_PL "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION2B_PL "Min:%sz Max:%sZ"
#define UI_TEXT_ACTION_XPOSITION_FAST2A_PL "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST2B_PL "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION_FAST2A_PL "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST2B_PL "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION_FAST2A_PL "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST2B_PL "Min:%sz Max:%sZ"
#define UI_TEXT_FANSPEED_PL "Obroty wiatraka"
#define UI_TEXT_ACTION_FANSPEED_PL "Obroty wiatraka:%Fs%%%"
#define UI_TEXT_FAN_OFF_PL "Wylacz wiatrak"
#define UI_TEXT_FAN_25_PL "Ustaw na 25%%%"
#define UI_TEXT_FAN_50_PL "Ustaw na 50%%%"
#define UI_TEXT_FAN_75_PL "Ustaw na 75%%%"
#define UI_TEXT_FAN_FULL_PL "Ustaw na 100%%%"
#define UI_TEXT_STEPPER_INACTIVE_PL "Wylacz silniki po"
#define UI_TEXT_STEPPER_INACTIVE2A_PL "Wylacz po: %is min."
#define UI_TEXT_STEPPER_INACTIVE2B_PL "0=Nie wylaczaj"
#define UI_TEXT_POWER_INACTIVE_PL "Wylacz zasil. po"
#define UI_TEXT_POWER_INACTIVE2A_PL "Wylacz po: %ip min."
#define UI_TEXT_POWER_INACTIVE2B_PL "0=Nie wylaczaj"
#define UI_TEXT_GENERAL_PL "Ustawienia glowne"
#define UI_TEXT_BAUDRATE_PL "Szybkosc USB:%oc"
#define UI_TEXT_EXTR_STEPS_PL "Kroki/mm : %Se"
#define UI_TEXT_EXTR_START_FEED_PL "Poczatkowa SZ:%Xf"
#define UI_TEXT_EXTR_MAX_FEED_PL "Max Szybkosc :%XF"
#define UI_TEXT_EXTR_ACCEL_PL "Przyspiesz. :%XA"
#define UI_TEXT_EXTR_WATCH_PL "Czas stabil. :%Xws"
#define UI_TEXT_EXTR_ADVANCE_L_PL "Advance lin :%Xl"
#define UI_TEXT_EXTR_ADVANCE_K_PL "Advance quad :%Xa"
#define UI_TEXT_EXTR_MANAGER_PL "Regulator:%Xh"
#define UI_TEXT_EXTR_DEADTIME_PL "Deadtime :%Xp"
#define UI_TEXT_EXTR_DMAX_DT_PL "Max. PWM :%XD"
#define UI_TEXT_EXTR_PGAIN_PL "PID P :%Xp"
#define UI_TEXT_EXTR_IGAIN_PL "PID I :%Xi"
#define UI_TEXT_EXTR_DGAIN_PL "PID D :%Xd"
#define UI_TEXT_EXTR_DMIN_PL "Min I war: %Xm"
#define UI_TEXT_EXTR_DMAX_PL "Max I war: %XM"
#define UI_TEXT_EXTR_PMAX_PL "Max ster.: %XD"
#define UI_TEXT_EXTR_XOFF_PL "Ofset X :%Xx"
#define UI_TEXT_EXTR_YOFF_PL "Ofset Y :%Xy"
#define UI_TEXT_STRING_HM_BANGBANG_PL "Dwustanowy"
#define UI_TEXT_STRING_HM_PID_PL "PID"
#define UI_TEXT_STRING_ACTION_PL "Akcja:%la"
#define UI_TEXT_HEATING_EXTRUDER_PL "Grzanie glowicy"
#define UI_TEXT_HEATING_BED_PL "Grzanie stolu"
#define UI_TEXT_KILLED_PL "Zatrzymany"
#define UI_TEXT_STEPPER_DISABLED_PL "Silniki wylaczone"
#define UI_TEXT_EEPROM_STOREDA_PL "Konfiguracja"
#define UI_TEXT_EEPROM_STOREDB_PL "zapisana do EEPROM"
#define UI_TEXT_EEPROM_LOADEDA_PL "Konfiguracja"
#define UI_TEXT_EEPROM_LOADEDB_PL "odczytana z EEPROM"
#define UI_TEXT_UPLOADING_PL "Ladowanie..."
#define UI_TEXT_PAGE_BUFFER_PL "Bufor:%oB"
#define UI_TEXT_PAGE_EXTRUDER_PL " E:%ec/%Ec" cDEG "C" cARROW "%oC"
#define UI_TEXT_PAGE_EXTRUDER1_PL "E1:%e0/%E0" cDEG "C" cARROW "%o0"
#define UI_TEXT_PAGE_EXTRUDER2_PL "E2:%e1/%E1" cDEG "C" cARROW "%o1"
#define UI_TEXT_PAGE_EXTRUDER3_PL "E3:%e2/%E2" cDEG "C" cARROW "%o2"
#define UI_TEXT_PAGE_BED_PL " B:%eb/%Eb" cDEG "C" cARROW "%ob"
#define UI_TEXT_SPEED_MULTIPLY_PL "Szybkosc druku :%om%%%"
#define UI_TEXT_FLOW_MULTIPLY_PL "Przeplyw filam.:%of%%%"
#define UI_TEXT_SHOW_MEASUREMENT_PL "Pokaz pomiar"
#define UI_TEXT_RESET_MEASUREMENT_PL "Zeruj pomiar"
#define UI_TEXT_SET_MEASURED_ORIGIN_PL "Ustaw Z=0"
#define UI_TEXT_ZCALIB_PL "Z kalib."
#define UI_TEXT_SET_P1_PL "Ustaw P1"
#define UI_TEXT_SET_P2_PL "Ustaw P2"
#define UI_TEXT_SET_P3_PL "Ustaw P3"
#define UI_TEXT_CALCULATE_LEVELING_PL "Oblicz poziomowania"
#define UI_TEXT_LEVEL_PL "Poziom delty"
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP_PL "MinTemp wysuwu:%XT" cDEG "C"
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS_PL "Wysuw rozgrzew:%XUmm"
#define UI_TEXT_SD_REMOVED_PL "Karta SD wyjeta"
#define UI_TEXT_SD_INSERTED_PL "Karta SD wlozona"
#define UI_TEXT_PRINTER_READY_PL "Drukarka gotowa"
// Printtime output gets aggregated like <Days_5gisgits>UI_TEXT_PRINTTIME_DAYS<Hours>UI_TEXT_PRINTTIME_HOURS<Minutes>UI_TEXT_PRINTTIME_MINUTES
// ___88 days 12:45
#define UI_TEXT_PRINTTIME_DAYS_PL " dni, "
#define UI_TEXT_PRINTTIME_HOURS_PL ":"
#define UI_TEXT_PRINTTIME_MINUTES_PL " h."
#define UI_TEXT_PRINT_TIME_PL "Czas pracy"
#define UI_TEXT_PRINT_FILAMENT_PL "Zuzyto filamentu"
#define UI_TEXT_PRINTED_PL "drukowane"
#define UI_TEXT_POWER_PL "Wl/Wyl zasilanie"
#define UI_TEXT_STRING_HM_DEADTIME_PL "Dead Time"
#define UI_TEXT_STRING_HM_SLOWBANG_PL "SlowBang"
#define UI_TEXT_STOP_PRINT_PL "Przerwij wydruk"
#define UI_TEXT_Z_BABYSTEPPING_PL "Doreguluj Z:%oYmm"
#define UI_TEXT_CHANGE_FILAMENT_PL "Zmiana filamentu"
#define UI_TEXT_WIZ_CH_FILAMENT1_PL "Zmien filament"
#define UI_TEXT_WIZ_CH_FILAMENT2_PL "Krec aby przesuwac"
#define UI_TEXT_WIZ_CH_FILAMENT3_PL "filament w gore/dol"
#define UI_TEXT_CLICK_DONE_PL "Kliknij jak gotowe"
#define UI_TEXT_AUTOLEVEL_ONOFF_PL "Autopoziomow.: %ll"
#define UI_TEXT_SERVOPOS_PL "Pozycja Serwa: %oS"
#define UI_TEXT_IGNORE_M106_PL "Ignoruj kom. M106 %Fi"
#define UI_TEXT_WIZ_REHEAT1_PL "Kliknij aby znów"
#define UI_TEXT_WIZ_REHEAT2_PL "rozgrzac ekstrudery"
#define UI_TEXT_WIZ_WAITTEMP1_PL "Poczekaj na zadane"
#define UI_TEXT_WIZ_WAITTEMP2_PL "temperatury ..."
#define UI_TEXT_EXTRUDER_JAM_PL "Ekstruder zablokowany"
#define UI_TEXT_STANDBY_PL "Standby"
#define UI_TEXT_BED_COATING_PL "Pokrycie stolu"
#define UI_TEXT_BED_COATING_SET1_PL "Wybierz material"
#define UI_TEXT_BED_COATING_SET2_PL "stolu:"
#define UI_TEXT_NOCOATING_PL "Czysty stol"
#define UI_TEXT_BUILDTAK_PL "BuildTak"
#define UI_TEXT_KAPTON_PL "Kapton"
#define UI_TEXT_BLUETAPE_PL "Nieb. tasma mask."
#define UI_TEXT_PETTAPE_PL "Zielona tasma PET"
#define UI_TEXT_GLUESTICK_PL "Klej w sztyfcie"
#define UI_TEXT_CUSTOM_PL "Inna"
#define UI_TEXT_COATING_CUSTOM_PL "Inna grubosc:%BCmm"
#define UI_TEXT_LANGUAGE_PL "Jezyk"
#if NUM_EXTRUDER > 2 || MIXING_EXTRUDER != 0
#define UI_TEXT_MAINPAGE6_1_PL "\xa %ec/%Ec\xb0 X:%x0"
#else
#define UI_TEXT_MAINPAGE6_1_PL "\xa %e0/%E0\xb0 X:%x0"
#endif // NUM_EXTRUDER
#if NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_2_PL "\xa %e1/%E1\xb0 Y:%x1"
#elif HAVE_HEATED_BED
#define UI_TEXT_MAINPAGE6_2_PL "\xe %eb/%Eb\xb0 Y:%x1"
#else
#define UI_TEXT_MAINPAGE6_2_PL " Y:%x1"
#endif
#if HAVE_HEATED_BED && NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_3_PL "\xe %eb/%Eb\xb0 Z:%x2"
#elif FEATURE_DITTO_PRINTING
#define UI_TEXT_MAINPAGE6_3_PL "Kopie: %ed Z:%x2"
#else
#define UI_TEXT_MAINPAGE6_3_PL "Przep:\xfd %of%%% Z:%x2"
#endif
#define UI_TEXT_MAINPAGE6_4_PL "Mul: %om%%% \xfd E: %x4m"
#define UI_TEXT_MAINPAGE6_5_PL "Buf: %oB"
#define UI_TEXT_MAINPAGE6_6_PL "%os"
#define UI_TEXT_MAINPAGE_TEMP_BED_PL cTEMP "%ec/%Ec" cDEG "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_BED_PL "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_Z_BUF_PL "Z:%x2 Buf : %oB"
#define UI_TEXT_MAINPAGE_MUL_EUSAGE_PL "Mul: %om E:%x4"
#define UI_TEXT_MAINPAGE_XY_PL "X:%x0 Y:%x1"
#define UI_TEXT_PRINT_TIME_VALUE_PL "%Ut"
#define UI_TEXT_PRINT_FILAMENT_VALUE_PL "%Uf m"
#define UI_TEXT_METER_PRINTED_PL "%Uf m " UI_TEXT_PRINTED_PL
#define UI_TEXT_STATUS_PL "%os"
#define UI_TEXT_EMPTY_PL ""
#define UI_TEXT_TEMP_SET_PL cTEMP "%ec/%Ec" cDEG
#define UI_TEXT_CURRENT_TEMP_PL cTEMP "%ec" cDEG
#define UI_TEXT_COATING_THICKNESS_PL " %BCmm"
#define UI_TEXT_EXTR3_TEMP_PL "Temp.Ex4:%e3/%E3" cDEG "C"
#define UI_TEXT_EXTR4_TEMP_PL "Temp.Ex5:%e4/%E4" cDEG "C"
#define UI_TEXT_EXTR5_TEMP_PL "Temp.Ex6:%e5/%E5" cDEG "C"
#define UI_TEXT_EXTR3_OFF_PL "Wyl. Extruder 4"
#define UI_TEXT_EXTR4_OFF_PL "Wyl. Extruder 5"
#define UI_TEXT_EXTR5_OFF_PL "Wyl. Extruder 6"
#define UI_TEXT_EXTR3_SELECT_PL "%X3 Wybierz Extr. 4"
#define UI_TEXT_EXTR4_SELECT_PL "%X4 Wybierz Extr. 5"
#define UI_TEXT_EXTR5_SELECT_PL "%X5 Wybierz Extr. 6"
#define UI_TEXT_DITTO_0_PL "%D0 Nie kopiuj"
#define UI_TEXT_DITTO_1_PL "%D1 1 Kopia"
#define UI_TEXT_DITTO_2_PL "%D2 2 Kopie"
#define UI_TEXT_DITTO_3_PL "%D3 3 Kopie"
#define UI_TEXT_ZPROBE_HEIGHT_PL "Wys. Sondy Z:%zh"
#define UI_TEXT_OFFSETS_PL "Polozenie wydruku"
#define UI_TEXT_X_OFFSET_PL "Przesun w X : %T0mm"
#define UI_TEXT_Y_OFFSET_PL "Przesun w Y : %T1mm"
#define UI_TEXT_Z_OFFSET_PL "Przesun w Z :%T2mm"
// Türk
#define UI_TEXT_ON_TR "Acik"
#define UI_TEXT_OFF_TR "Kapali"
#define UI_TEXT_NA_TR "N/A" // Output for not available
#define UI_TEXT_YES_TR "Evet"
#define UI_TEXT_NO_TR "Hayir"
#define UI_TEXT_PRINT_POS_TR "Yaziyor..."
#define UI_TEXT_PRINTING_TR "Yaziyor"
#define UI_TEXT_IDLE_TR "Bosta"
#define UI_TEXT_NOSDCARD_TR "SD Kart Yok"
#define UI_TEXT_ERROR_TR "**** HATA ****"
#define UI_TEXT_BACK_TR "Geri " cUP
#define UI_TEXT_QUICK_SETTINGS_TR "Hizli Ayar"
#define UI_TEXT_ERRORMSG_TR "%oe"
#define UI_TEXT_CONFIGURATION_TR "Yapilandirma"
#define UI_TEXT_POSITION_TR "Konum-Hareket"
#define UI_TEXT_EXTRUDER_TR "Extruder"
#define UI_TEXT_SD_CARD_TR "SD Kart"
#define UI_TEXT_DEBUGGING_TR "Debugging"
#define UI_TEXT_HOME_DELTA_TR "Deltayi Sifr. Gond."
#define UI_TEXT_HOME_ALL_TR "Hepsini S.Gonder"
#define UI_TEXT_HOME_X_TR "X S.Gonder"
#define UI_TEXT_HOME_Y_TR "Y S.Gonder"
#define UI_TEXT_HOME_Z_TR "Z S.Gonder"
#define UI_TEXT_PREHEAT_PLA_TR "PLA On Isitma"
#define UI_TEXT_PREHEAT_ABS_TR "ABS On Isitma"
#define UI_TEXT_LIGHTS_ONOFF_TR "Isiklar :%lo"
#define UI_TEXT_COOLDOWN_TR "Soguma"
#define UI_TEXT_SET_TO_ORIGIN_TR "Orijine ayarla"
#define UI_TEXT_DISABLE_STEPPER_TR "Motoru Kapat"
#define UI_TEXT_X_POSITION_TR "X Hareketi"
#define UI_TEXT_X_POS_FAST_TR "X Hizli Hareketi"
#define UI_TEXT_Y_POSITION_TR "Y Hareketi"
#define UI_TEXT_Y_POS_FAST_TR "Y Hizli Hareketi"
#define UI_TEXT_Z_POSITION_TR "Z Hareketi"
#define UI_TEXT_Z_POS_FAST_TR "Z Hizli Hareketi"
#define UI_TEXT_E_POSITION_TR "Hareketi"
#define UI_TEXT_BED_TEMP_TR "Tabla Sic: %Eb" cDEG "C"
#define UI_TEXT_EXTR0_TEMP_TR "Sic. 1 : %E0" cDEG "C"
#define UI_TEXT_EXTR1_TEMP_TR "Sic. 2 : %E1" cDEG "C"
#define UI_TEXT_EXTR2_TEMP_TR "Sic. 3 : %E2" cDEG "C"
#define UI_TEXT_EXTR0_OFF_TR "Extr. 1'i Kapa"
#define UI_TEXT_EXTR1_OFF_TR "Extr. 2'i Kapa"
#define UI_TEXT_EXTR2_OFF_TR "Extr. 3'i Kapa"
#define UI_TEXT_EXTR0_SELECT_TR "%X0 Extr. 1'i Sec"
#define UI_TEXT_EXTR1_SELECT_TR "%X1 Extr. 2'yi Sec"
#define UI_TEXT_EXTR2_SELECT_TR "%X2 Extr. 3'u Sec"
#define UI_TEXT_EXTR_ORIGIN_TR "Origin i Ayarla"
#define UI_TEXT_PRINT_X_TR "Yazma H. X:%ax"
#define UI_TEXT_PRINT_Y_TR "Yazma H. Y:%ay"
#define UI_TEXT_PRINT_Z_TR "Yazma H. Z:%az"
#define UI_TEXT_PRINT_Z_DELTA_TR "Yazma H.:%az"
#define UI_TEXT_MOVE_X_TR "Hareket X :%aX"
#define UI_TEXT_MOVE_Y_TR "Hareket Y :%aY"
#define UI_TEXT_MOVE_Z_TR "Hareket Z :%aZ"
#define UI_TEXT_MOVE_Z_DELTA_TR "Hareket :%aZ"
#define UI_TEXT_JERK_TR "X-Y Jerk :%aj"
#define UI_TEXT_ZJERK_TR "Z-Jerk :%aJ"
#define UI_TEXT_ACCELERATION_TR "Ivme"
#define UI_TEXT_STORE_TO_EEPROM_TR "EEPROM'a kaydet"
#define UI_TEXT_LOAD_EEPROM_TR "EEPROM'dan cagir"
#define UI_TEXT_DBG_ECHO_TR "Echo :%do"
#define UI_TEXT_DBG_INFO_TR "Bilgi :%di"
#define UI_TEXT_DBG_ERROR_TR "Hatalar :%de"
#define UI_TEXT_DBG_DRYRUN_TR "Bosta Calis:%dd"
#define UI_TEXT_DBG_ENDSTOP_TR "EndStop :%dp"
#define UI_TEXT_OPS_OFF_TR "%O0 OPS Kapali"
#define UI_TEXT_OPS_CLASSIC_TR "%O1 OPS Klasik"
#define UI_TEXT_OPS_FAST_TR "%O2 OPS Hizli"
#define UI_TEXT_OPS_RETRACT_TR "Geri Cekl.:%Or"
#define UI_TEXT_OPS_BACKSLASH_TR "Eksen Bosl.:%Ob"
#define UI_TEXT_OPS_MINDIST_TR "Min. Mesafe:%Od"
#define UI_TEXT_OPS_MOVE_AFTER_TR "Move after:%Oa"
#define UI_TEXT_ANTI_OOZE_TR "Anti Ooze"
#define UI_TEXT_PRINT_FILE_TR "Dosya Yazdir"
#define UI_TEXT_PAUSE_PRINT_TR "Baskiyi Duraklat"
#define UI_TEXT_CONTINUE_PRINT_TR "Baskiya Devam"
#define UI_TEXT_UNMOUNT_CARD_TR "Karti Cikar"
#define UI_TEXT_MOUNT_CARD_TR "Karti Bagla"
#define UI_TEXT_DELETE_FILE_TR "Dosyayi Sil"
#define UI_TEXT_FEEDRATE_TR "Ilerleme"
#define UI_TEXT_FEED_MAX_X_TR "Max X:%fx"
#define UI_TEXT_FEED_MAX_Y_TR "Max Y:%fy"
#define UI_TEXT_FEED_MAX_Z_TR "Max Z:%fz"
#define UI_TEXT_FEED_MAX_Z_DELTA_TR "Max:%fz"
#define UI_TEXT_FEED_HOME_X_TR "X'i Sif.Gon.Hiz.:%fX"
#define UI_TEXT_FEED_HOME_Y_TR "Y'yi Sif.Gon.Hiz.:%fY"
#define UI_TEXT_FEED_HOME_Z_TR "Z'i Sif.Gon.Hiz:%fZ"
#define UI_TEXT_FEED_HOME_Z_DELTA_TR "Delta Sif.Gon.Hiz:%fZ"
#define UI_TEXT_ACTION_XPOSITION4A_TR "X:%x0 mm %dx%dX"
#define UI_TEXT_ACTION_XPOSITION4B_TR "Min endstop:%sx"
#define UI_TEXT_ACTION_XPOSITION4C_TR "Max endstop:%sX"
#define UI_TEXT_ACTION_XPOSITION4D_TR ""
#define UI_TEXT_ACTION_YPOSITION4A_TR "Y:%x1 mm %dy%dY"
#define UI_TEXT_ACTION_YPOSITION4B_TR "Min endstop:%sy"
#define UI_TEXT_ACTION_YPOSITION4C_TR "Max endstop:%sY"
#define UI_TEXT_ACTION_YPOSITION4D_TR ""
#define UI_TEXT_ACTION_ZPOSITION4A_TR "Z:%x2 mm %dz%dZ"
#define UI_TEXT_ACTION_ZPOSITION4B_TR "Min endstop:%sz"
#define UI_TEXT_ACTION_ZPOSITION4C_TR "Max endstop:%sZ"
#define UI_TEXT_ACTION_ZPOSITION4D_TR ""
#define UI_TEXT_ACTION_XPOSITION_FAST4A_TR "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST4B_TR "Min endstop:%sx"
#define UI_TEXT_ACTION_XPOSITION_FAST4C_TR "Max endstop:%sX"
#define UI_TEXT_ACTION_XPOSITION_FAST4D_TR ""
#define UI_TEXT_ACTION_YPOSITION_FAST4A_TR "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST4B_TR "Min endstop:%sy"
#define UI_TEXT_ACTION_YPOSITION_FAST4C_TR "Max endstop:%sY"
#define UI_TEXT_ACTION_YPOSITION_FAST4D_TR ""
#define UI_TEXT_ACTION_ZPOSITION_FAST4A_TR "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST4B_TR "Min endstop:%sz"
#define UI_TEXT_ACTION_ZPOSITION_FAST4C_TR "Max endstop:%sZ"
#define UI_TEXT_ACTION_ZPOSITION_FAST4D_TR ""
#define UI_TEXT_ACTION_EPOSITION_FAST2A_TR "E:%x3 mm"
#define UI_TEXT_ACTION_EPOSITION_FAST2B_TR "1 tik = 1 mm"
#define UI_TEXT_ACTION_XPOSITION2A_TR "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION2B_TR "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION2A_TR "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION2B_TR "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION2A_TR "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION2B_TR "Min:%sz Max:%sZ"
#define UI_TEXT_ACTION_XPOSITION_FAST2A_TR "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST2B_TR "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION_FAST2A_TR "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST2B_TR "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION_FAST2A_TR "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST2B_TR "Min:%sz Max:%sZ"
#define UI_TEXT_FANSPEED_TR "Fan Hizi"
#define UI_TEXT_ACTION_FANSPEED_TR "Fan Hizi:%Fs%%%"
#define UI_TEXT_FAN_OFF_TR "Fan'i Kapat"
#define UI_TEXT_FAN_25_TR "Fan'i Ayarla 25%%%"
#define UI_TEXT_FAN_50_TR "Fan'i Ayarla 50%%%"
#define UI_TEXT_FAN_75_TR "Fan'i Ayarla 75%%%"
#define UI_TEXT_FAN_FULL_TR "Fan Tam Acik"
#define UI_TEXT_STEPPER_INACTIVE_TR "Motorlar Bosta"
#define UI_TEXT_STEPPER_INACTIVE2A_TR "Motor Kapa: %is"
#define UI_TEXT_STEPPER_INACTIVE2B_TR "[min] 0=Off"
#define UI_TEXT_POWER_INACTIVE_TR "Max. Bosta"
#define UI_TEXT_POWER_INACTIVE2A_TR "Kapama sur.: %ip"
#define UI_TEXT_POWER_INACTIVE2B_TR "[min] 0=Kapali"
#define UI_TEXT_GENERAL_TR "Genel"
#define UI_TEXT_BAUDRATE_TR "Baudrate:%oc"
#define UI_TEXT_EXTR_STEPS_TR "Adim/MM:%Se"
#define UI_TEXT_EXTR_START_FEED_TR "Baslangic FR:%Xf"
#define UI_TEXT_EXTR_MAX_FEED_TR "Max FR:%XF"
#define UI_TEXT_EXTR_ACCEL_TR "Ivme:%XA"
#define UI_TEXT_EXTR_WATCH_TR "Stab.Time:%Xw"
#define UI_TEXT_EXTR_ADVANCE_L_TR "Gelismis lin:%Xl"
#define UI_TEXT_EXTR_ADVANCE_K_TR "Gelismis quad:%Xa"
#define UI_TEXT_EXTR_MANAGER_TR "Kontrol:%Xh"
#define UI_TEXT_EXTR_PGAIN_TR "PID P:%Xp"
#define UI_TEXT_EXTR_DEADTIME_TR "Bos Zamn:%Xp"
#define UI_TEXT_EXTR_DMAX_DT_TR "Kontrol PWM:%XM"
#define UI_TEXT_EXTR_IGAIN_TR "PID I:%Xi"
#define UI_TEXT_EXTR_DGAIN_TR "PID D:%Xd"
#define UI_TEXT_EXTR_DMIN_TR "Surucu Min:%Xm"
#define UI_TEXT_EXTR_DMAX_TR "Surucu Max:%XM"
#define UI_TEXT_EXTR_PMAX_TR "PID Max:%XD"
#define UI_TEXT_EXTR_XOFF_TR "X-Ofset:%Xx"
#define UI_TEXT_EXTR_YOFF_TR "Y-Ofset:%Xy"
#define UI_TEXT_STRING_HM_BANGBANG_TR "BangBang"
#define UI_TEXT_STRING_HM_PID_TR "PID"
#define UI_TEXT_STRING_ACTION_TR "Eylem:%la"
#define UI_TEXT_HEATING_EXTRUDER_TR "Extruder Isiniyor"
#define UI_TEXT_HEATING_BED_TR "Bed Isiniyor"
#define UI_TEXT_KILLED_TR "DURDU"
#define UI_TEXT_STEPPER_DISABLED_TR "Motorlar Kapali"
#define UI_TEXT_EEPROM_STOREDA_TR "Konfigurasyon"
#define UI_TEXT_EEPROM_STOREDB_TR "EEPROM'a kaydedildi"
#define UI_TEXT_EEPROM_LOADEDA_TR "Konfigurasyon"
#define UI_TEXT_EEPROM_LOADEDB_TR "EEPROM'dan cagrildi"
#define UI_TEXT_UPLOADING_TR "Yukluyor..."
#define UI_TEXT_PAGE_BUFFER_TR "Onbellek:%oB"
#define UI_TEXT_PAGE_EXTRUDER_TR " E:%ec/%Ec" cDEG "C" cARROW "%oC"
#define UI_TEXT_PAGE_EXTRUDER1_TR "E1:%e0/%E0" cDEG "C" cARROW "%o0"
#define UI_TEXT_PAGE_EXTRUDER2_TR "E2:%e1/%E1" cDEG "C" cARROW "%o1"
#define UI_TEXT_PAGE_EXTRUDER3_TR "E3:%e2/%E2" cDEG "C" cARROW "%o2"
#define UI_TEXT_PAGE_BED_TR " B:%eb/%Eb" cDEG "C" cARROW "%ob"
#define UI_TEXT_SPEED_MULTIPLY_TR "Hiz Carp.:%om%%%"
#define UI_TEXT_FLOW_MULTIPLY_TR "Akis Carp. :%of%%%"
#define UI_TEXT_SHOW_MEASUREMENT_TR "Olcumu Goster"
#define UI_TEXT_RESET_MEASUREMENT_TR "Olcumu Sifirla"
#define UI_TEXT_SET_MEASURED_ORIGIN_TR "Z=0'a ayarla"
#define UI_TEXT_ZCALIB_TR "Z Kalib."
#define UI_TEXT_SET_P1_TR "Set P1"
#define UI_TEXT_SET_P2_TR "Set P2"
#define UI_TEXT_SET_P3_TR "Set P3"
#define UI_TEXT_CALCULATE_LEVELING_TR "Sevieyi Hesapla"
#define UI_TEXT_LEVEL_TR "Deltayi seviyele"
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP_TR "Bekle Sic. %XT" cDEG "C"
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS_TR "Bekle: %XU mm"
#define UI_TEXT_SD_REMOVED_TR "SD Card Cikarildi"
#define UI_TEXT_SD_INSERTED_TR "SD Card Takildi"
#define UI_TEXT_PRINTER_READY_TR "Yazici Hazir"
// Printtime output gets aggregated like <Days_5gisgits>UI_TEXT_PRINTTIME_DAYS<Hours>UI_TEXT_PRINTTIME_HOURS<Minutes>UI_TEXT_PRINTTIME_MINUTES
// ___88 days 12:45
#define UI_TEXT_PRINTTIME_DAYS_TR " gun "
#define UI_TEXT_PRINTTIME_HOURS_TR ":"
#define UI_TEXT_PRINTTIME_MINUTES_TR ""
#define UI_TEXT_PRINT_TIME_TR "Yazdirma Zamani"
#define UI_TEXT_PRINT_FILAMENT_TR "Filament harcandi"
#define UI_TEXT_PRINTED_TR "yazildi"
#define UI_TEXT_POWER_TR "ATX gucu on/off"
#define UI_TEXT_STRING_HM_DEADTIME_TR "Bosta Zaman"
#define UI_TEXT_STRING_HM_SLOWBANG_TR "SlowBang"
#define UI_TEXT_STOP_PRINT_TR "Yazdirmayi durdur"
#define UI_TEXT_Z_BABYSTEPPING_TR "Z Babystep.:%oYmm"
#define UI_TEXT_CHANGE_FILAMENT_TR "Filament degistir"
#define UI_TEXT_WIZ_CH_FILAMENT1_TR "Filament degistir"
#define UI_TEXT_WIZ_CH_FILAMENT2_TR "Filameti yukari asagi"
#define UI_TEXT_WIZ_CH_FILAMENT3_TR "almak icin cevirin"
#define UI_TEXT_CLICK_DONE_TR "Tamamlandiginda butona basin"
#define UI_TEXT_AUTOLEVEL_ONOFF_TR "Oto seviye: %ll"
#define UI_TEXT_SERVOPOS_TR "Servo pos.: %oS"
#define UI_TEXT_IGNORE_M106_TR "M106Yi atla %Fi"
#define UI_TEXT_WIZ_REHEAT1_TR "Extruderlari tekrar"
#define UI_TEXT_WIZ_REHEAT2_TR "isitmak icin tiklayin"
#define UI_TEXT_WIZ_WAITTEMP1_TR "Istnilen sicakliklar"
#define UI_TEXT_WIZ_WAITTEMP2_TR "icin bekleyin"
#define UI_TEXT_EXTRUDER_JAM_TR "Extruder takildi"
#define UI_TEXT_STANDBY_TR "Bekleme Modu"
#define UI_TEXT_BED_COATING_TR "Tabla ustu kaplama"
#define UI_TEXT_BED_COATING_SET1_TR "Kaplama Kalinligi"
#define UI_TEXT_BED_COATING_SET2_TR ""
#define UI_TEXT_NOCOATING_TR "Kaplama Yok"
#define UI_TEXT_BUILDTAK_TR "BuildTak"
#define UI_TEXT_KAPTON_TR "Kapton"
#define UI_TEXT_BLUETAPE_TR "Mavi Boya Kagidi"
#define UI_TEXT_PETTAPE_TR "Yesil PET Tape"
#define UI_TEXT_GLUESTICK_TR "Yapiskan"
#define UI_TEXT_CUSTOM_TR "Diger"
#define UI_TEXT_COATING_CUSTOM_TR "Diger : %oCmm"
#define UI_TEXT_LANGUAGE_TR "Dil"
#if NUM_EXTRUDER > 2 || MIXING_EXTRUDER != 0
#define UI_TEXT_MAINPAGE6_1_TR "\xa %ec/%Ec\xb0 X:%x0"
#else
#define UI_TEXT_MAINPAGE6_1_TR "\xa %e0/%E0\xb0 X:%x0"
#endif // NUM_EXTRUDER
#if NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_2_TR "\xa %e1/%E1\xb0 Y:%x1"
#elif HAVE_HEATED_BED
#define UI_TEXT_MAINPAGE6_2_TR "\xe %eb/%Eb\xb0 Y:%x1"
#else
#define UI_TEXT_MAINPAGE6_2_TR " Y:%x1"
#endif
#if HAVE_HEATED_BED && NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_3_TR "\xe %eb/%Eb\xb0 Z:%x2"
#elif FEATURE_DITTO_PRINTING
#define UI_TEXT_MAINPAGE6_3_TR "Kopie: %ed Z:%x2"
#else
#define UI_TEXT_MAINPAGE6_3_TR "Przep:\xfd %of%%% Z:%x2"
#endif
#define UI_TEXT_MAINPAGE6_4_TR "Mul: %om%%% \xfd E: %x4m"
#define UI_TEXT_MAINPAGE6_5_TR "Buf: %oB"
#define UI_TEXT_MAINPAGE6_6_TR "%os"
#define UI_TEXT_MAINPAGE_TEMP_BED_TR cTEMP "%ec/%Ec" cDEG "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_BED_TR "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_Z_BUF_TR "Z:%x2 Buf : %oB"
#define UI_TEXT_MAINPAGE_MUL_EUSAGE_TR "Mul: %om E:%x4"
#define UI_TEXT_MAINPAGE_XY_TR "X:%x0 Y:%x1"
#define UI_TEXT_PRINT_TIME_VALUE_TR "%Ut"
#define UI_TEXT_PRINT_FILAMENT_VALUE_TR "%Uf m"
#define UI_TEXT_METER_PRINTED_TR "%Uf m " UI_TEXT_PRINTED_TR
#define UI_TEXT_STATUS_TR "%os"
#define UI_TEXT_EMPTY_TR ""
#define UI_TEXT_TEMP_SET_TR cTEMP "%ec/%Ec" cDEG
#define UI_TEXT_CURRENT_TEMP_TR cTEMP "%ec" cDEG
#define UI_TEXT_COATING_THICKNESS_TR " %oCmm"
#define UI_TEXT_EXTR3_TEMP_TR "Sic. 4 : %E3" cDEG "C"
#define UI_TEXT_EXTR4_TEMP_TR "Sic. 5 : %E4" cDEG "C"
#define UI_TEXT_EXTR5_TEMP_TR "Sic. 6 : %E5" cDEG "C"
#define UI_TEXT_EXTR3_OFF_TR "Ext. 4u kapat"
#define UI_TEXT_EXTR4_OFF_TR " Ext. 5i kapat "
#define UI_TEXT_EXTR5_OFF_TR " Ext. 6yi kapat "
#define UI_TEXT_EXTR3_SELECT_TR "%X3 Ext. 4u sec "
#define UI_TEXT_EXTR4_SELECT_TR "%X4 Ext. 5i sec "
#define UI_TEXT_EXTR5_SELECT_TR "%X5 Ext. 6yi sec "
#define UI_TEXT_DITTO_0_TR "%D0 Kopyalama"
#define UI_TEXT_DITTO_1_TR "%D1 1 kopya"
#define UI_TEXT_DITTO_2_TR "%D2 2 kopya"
#define UI_TEXT_DITTO_3_TR "%D3 3 kopya"
#define UI_TEXT_ZPROBE_HEIGHT_TR "Z-prob yuksekligi:%zh"
#define UI_TEXT_OFFSETS_TR "Set print offsets"
#define UI_TEXT_X_OFFSET_TR "Set X offset:%T0mm"
#define UI_TEXT_Y_OFFSET_TR "Set Y offset:%T1mm"
#define UI_TEXT_Z_OFFSET_TR "Set Z offset:%T2mm"
// *************** Finnish translation ****************
// ********** By Matti Granstedt 28.01.2016 ***********
#define UI_TEXT_ON_FI "P" STR_auml STR_auml "lle"
#define UI_TEXT_OFF_FI "Sammuta"
#define UI_TEXT_NA_FI "N/A" // Output for not available
#define UI_TEXT_YES_FI "Kyll" STR_auml ""
#define UI_TEXT_NO_FI "Ei"
#define UI_TEXT_PRINT_POS_FI "Tulostaa..."
#define UI_TEXT_PRINTING_FI "Tulosta"
#define UI_TEXT_IDLE_FI "Valmis"
#define UI_TEXT_NOSDCARD_FI "Ei SD korttia"
#define UI_TEXT_ERROR_FI "**** VIRHE ****"
#define UI_TEXT_BACK_FI "Takaisin" cUP
#define UI_TEXT_QUICK_SETTINGS_FI "Pika-asetukset"
#define UI_TEXT_ERRORMSG_FI "%oe"
#define UI_TEXT_CONFIGURATION_FI "Kokoonpano"
#define UI_TEXT_POSITION_FI "Paikka"
#define UI_TEXT_EXTRUDER_FI "Pursotin"
#define UI_TEXT_SD_CARD_FI "SD kortti"
#define UI_TEXT_DEBUGGING_FI "Virheenetsint" STR_auml ""
#define UI_TEXT_HOME_DELTA_FI "Koti delta"
#define UI_TEXT_HOME_ALL_FI "Koti kaikki"
#define UI_TEXT_HOME_X_FI "Koti X"
#define UI_TEXT_HOME_Y_FI "Koti Y"
#define UI_TEXT_HOME_Z_FI "Koti Z"
#define UI_TEXT_PREHEAT_PLA_FI "Esilämmitys PLA"
#define UI_TEXT_PREHEAT_ABS_FI "Esilämmitys ABS"
#define UI_TEXT_LIGHTS_ONOFF_FI "Valot:%lo"
#define UI_TEXT_COOLDOWN_FI "J" STR_auml STR_auml "hdytys"
#define UI_TEXT_SET_TO_ORIGIN_FI "Aseta l" STR_auml "ht" STR_ouml "piste"
#define UI_TEXT_DISABLE_STEPPER_FI "Sammuta moottori"
#define UI_TEXT_X_POSITION_FI "X Paikka"
#define UI_TEXT_X_POS_FAST_FI "X Paikka nopea"
#define UI_TEXT_Y_POSITION_FI "Y Paikka"
#define UI_TEXT_Y_POS_FAST_FI "Y Paikka nopea"
#define UI_TEXT_Z_POSITION_FI "Z Paikka"
#define UI_TEXT_Z_POS_FAST_FI "Z Paikka nopea"
#define UI_TEXT_E_POSITION_FI "Pursot. paikka"
#define UI_TEXT_BED_TEMP_FI "Alustan :%eb/%Eb" cDEG "C"
#define UI_TEXT_EXTR0_TEMP_FI "Purso 1 :%e0/%E0" cDEG "C"
#define UI_TEXT_EXTR1_TEMP_FI "Purso 2 :%e1/%E1" cDEG "C"
#define UI_TEXT_EXTR2_TEMP_FI "Purso 3 :%e2/%E2" cDEG "C"
#define UI_TEXT_EXTR0_OFF_FI "Pursotin 1 Ei"
#define UI_TEXT_EXTR1_OFF_FI "Pursotin 2 Ei"
#define UI_TEXT_EXTR2_OFF_FI "Pursotin 3 Ei"
#define UI_TEXT_EXTR0_SELECT_FI "%X0 Valitse purs.1"
#define UI_TEXT_EXTR1_SELECT_FI "%X1 Valitse purs.2"
#define UI_TEXT_EXTR2_SELECT_FI "%X2 Valitse purs.3"
#define UI_TEXT_EXTR_ORIGIN_FI "Aseta l" STR_auml "ht" STR_ouml "piste"
#define UI_TEXT_PRINT_X_FI "Tulosta X:%ax"
#define UI_TEXT_PRINT_Y_FI "Tulosta Y:%ay"
#define UI_TEXT_PRINT_Z_FI "Tulosta Z:%az"
#define UI_TEXT_PRINT_Z_DELTA_FI "Tulosta:%az"
#define UI_TEXT_MOVE_X_FI "Siirr" STR_auml "X :%aX"
#define UI_TEXT_MOVE_Y_FI "Siirr" STR_auml "Y :%aY"
#define UI_TEXT_MOVE_Z_FI "Siirr" STR_auml "Z :%aZ"
#define UI_TEXT_MOVE_Z_DELTA_FI "Siirr" STR_auml ":%aZ"
#define UI_TEXT_JERK_FI "Askel :%aj"
#define UI_TEXT_ZJERK_FI "Z-Askel :%aJ"
#define UI_TEXT_ACCELERATION_FI "Kiihtyvyys"
#define UI_TEXT_STORE_TO_EEPROM_FI "Tallenna EEPROM"
#define UI_TEXT_LOAD_EEPROM_FI "Lataa EEPROM"
#define UI_TEXT_DBG_ECHO_FI "Toista :%do"
#define UI_TEXT_DBG_INFO_FI "Tiedot :%di"
#define UI_TEXT_DBG_ERROR_FI "Virheet :%de"
#define UI_TEXT_DBG_DRYRUN_FI "Kuiva-ajo:%dd"
#define UI_TEXT_DBG_ENDSTOP_FI "EndStop :%dp"
#define UI_TEXT_OPS_OFF_FI "%O0 OPS ei"
#define UI_TEXT_OPS_CLASSIC_FI "%O1 OPS normaali"
#define UI_TEXT_OPS_FAST_FI "%O2 OPS nopea"
#define UI_TEXT_OPS_RETRACT_FI "Peruuta :%Or"
#define UI_TEXT_OPS_BACKSLASH_FI "Backsl. :%Ob"
#define UI_TEXT_OPS_MINDIST_FI "Min.dist :%Od"
#define UI_TEXT_OPS_MOVE_AFTER_FI "Siirr" STR_auml "j" STR_auml "lkeen:%Oa"
#define UI_TEXT_ANTI_OOZE_FI "Vuodon poisto"
#define UI_TEXT_PRINT_FILE_FI "Tulosta Tiedosto"
#define UI_TEXT_PAUSE_PRINT_FI "Tulostustauko"
#define UI_TEXT_CONTINUE_PRINT_FI "Jatka tulostusta"
#define UI_TEXT_UNMOUNT_CARD_FI "Kortti poistettu"
#define UI_TEXT_MOUNT_CARD_FI "Kortti asetettu"
#define UI_TEXT_DELETE_FILE_FI "Poista tiedosto"
#define UI_TEXT_FEEDRATE_FI "Sy" STR_ouml "tt" STR_ouml "nopeus"
#define UI_TEXT_FEED_MAX_X_FI "Maks. X:%fx"
#define UI_TEXT_FEED_MAX_Y_FI "Maks. Y:%fy"
#define UI_TEXT_FEED_MAX_Z_FI "Maks. Z:%fz"
#define UI_TEXT_FEED_MAX_Z_DELTA_FI "Maks.:%fz"
#define UI_TEXT_FEED_HOME_X_FI "Koti X:%fX"
#define UI_TEXT_FEED_HOME_Y_FI "Koti Y:%fY"
#define UI_TEXT_FEED_HOME_Z_FI "Koti Z:%fZ"
#define UI_TEXT_FEED_HOME_Z_DELTA_FI "Koti:%fZ"
#define UI_TEXT_ACTION_XPOSITION4A_FI "X:%x0 mm %dx%dX"
#define UI_TEXT_ACTION_XPOSITION4B_FI "Min. rajoittimesta:%sx"
#define UI_TEXT_ACTION_XPOSITION4C_FI "Maks rajoittimesta:%sX"
#define UI_TEXT_ACTION_XPOSITION4D_FI ""
#define UI_TEXT_ACTION_YPOSITION4A_FI "Y:%x1 mm %dy%dY"
#define UI_TEXT_ACTION_YPOSITION4B_FI "Min. rajoittimesta:%sy"
#define UI_TEXT_ACTION_YPOSITION4C_FI "Maks rajoittimesta:%sY"
#define UI_TEXT_ACTION_YPOSITION4D_FI ""
#define UI_TEXT_ACTION_ZPOSITION4A_FI "Z:%x2 mm %dz%dZ"
#define UI_TEXT_ACTION_ZPOSITION4B_FI "Min. rajoittimesta:%sz"
#define UI_TEXT_ACTION_ZPOSITION4C_FI "Maks rajoittimesta:%sZ"
#define UI_TEXT_ACTION_ZPOSITION4D_FI ""
#define UI_TEXT_ACTION_XPOSITION_FAST4A_FI "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST4B_FI "Min. rajoittimesta:%sx"
#define UI_TEXT_ACTION_XPOSITION_FAST4C_FI "Maks rajoittimesta:%sX"
#define UI_TEXT_ACTION_XPOSITION_FAST4D_FI ""
#define UI_TEXT_ACTION_YPOSITION_FAST4A_FI "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST4B_FI "Min. rajoittimesta:%sy"
#define UI_TEXT_ACTION_YPOSITION_FAST4C_FI "Maks rajoittimesta:%sY"
#define UI_TEXT_ACTION_YPOSITION_FAST4D_FI ""
#define UI_TEXT_ACTION_ZPOSITION_FAST4A_FI "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST4B_FI "Min. rajoittimesta:%sz"
#define UI_TEXT_ACTION_ZPOSITION_FAST4C_FI "Maks rajoittimesta:%sZ"
#define UI_TEXT_ACTION_ZPOSITION_FAST4D_FI ""
#define UI_TEXT_ACTION_EPOSITION_FAST2A_FI "E:%x3 mm"
#define UI_TEXT_ACTION_EPOSITION_FAST2B_FI "1 klikkaus = 1 mm"
#define UI_TEXT_ACTION_XPOSITION2A_FI "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION2B_FI "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION2A_FI "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION2B_FI "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION2A_FI "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION2B_FI "Min:%sz Max:%sZ"
#define UI_TEXT_ACTION_XPOSITION_FAST2A_FI "X:%x0 mm"
#define UI_TEXT_ACTION_XPOSITION_FAST2B_FI "Min:%sx Max:%sX"
#define UI_TEXT_ACTION_YPOSITION_FAST2A_FI "Y:%x1 mm"
#define UI_TEXT_ACTION_YPOSITION_FAST2B_FI "Min:%sy Max:%sY"
#define UI_TEXT_ACTION_ZPOSITION_FAST2A_FI "Z:%x2 mm"
#define UI_TEXT_ACTION_ZPOSITION_FAST2B_FI "Min:%sz Max:%sZ"
#define UI_TEXT_FANSPEED_FI "Tuulettimen nopeus"
#define UI_TEXT_ACTION_FANSPEED_FI "Tuuletin nopeus:%Fs%%%"
#define UI_TEXT_FAN_OFF_FI "Sammuta tuuletin"
#define UI_TEXT_FAN_25_FI "Aseta nop. 25%%%"
#define UI_TEXT_FAN_50_FI "Aseta nop. 50%%%"
#define UI_TEXT_FAN_75_FI "Aseta nop. 75%%%"
#define UI_TEXT_FAN_FULL_FI "Aseta nop. maks."
#define UI_TEXT_STEPPER_INACTIVE_FI "Moottori toimeton"
#define UI_TEXT_STEPPER_INACTIVE2A_FI "Toimeton j" STR_auml "lkeen: %is"
#define UI_TEXT_STEPPER_INACTIVE2B_FI "[min] 0=sammuta"
#define UI_TEXT_POWER_INACTIVE_FI "Maks. toimeton"
#define UI_TEXT_POWER_INACTIVE2A_FI "Toimeton j" STR_auml "lkeen: %ip"
#define UI_TEXT_POWER_INACTIVE2B_FI "[min] 0=sammuta"
#define UI_TEXT_GENERAL_FI "Yleiset"
#define UI_TEXT_BAUDRATE_FI "Siirtonopeus:%oc"
#define UI_TEXT_EXTR_STEPS_FI "Askelta/MM:%Se"
#define UI_TEXT_EXTR_START_FEED_FI "K" STR_auml "ynnist" STR_auml "FR:%Xf"
#define UI_TEXT_EXTR_MAX_FEED_FI "Maks. FR:%XF"
#define UI_TEXT_EXTR_ACCEL_FI "Kiihdytys:%XA"
#define UI_TEXT_EXTR_WATCH_FI "Stab.Aika:%Xw"
#define UI_TEXT_EXTR_ADVANCE_L_FI "Eteneminen lin:%Xl"
#define UI_TEXT_EXTR_ADVANCE_K_FI "Eteneminen quad:%Xa"
#define UI_TEXT_EXTR_MANAGER_FI "Hallinta:%Xh"
#define UI_TEXT_EXTR_PGAIN_FI "PID P:%Xp"
#define UI_TEXT_EXTR_DEADTIME_FI "Kuollut aika:%Xp"
#define UI_TEXT_EXTR_DMAX_DT_FI "Valvonta PWM:%XM"
#define UI_TEXT_EXTR_IGAIN_FI "PID I:%Xi"
#define UI_TEXT_EXTR_DGAIN_FI "PID D:%Xd"
#define UI_TEXT_EXTR_DMIN_FI "Ajo Min:%Xm"
#define UI_TEXT_EXTR_DMAX_FI "Ajo Max:%XM"
#define UI_TEXT_EXTR_PMAX_FI "PID Max:%XD"
#define UI_TEXT_EXTR_XOFF_FI "X-tasoitus:%Xx"
#define UI_TEXT_EXTR_YOFF_FI "Y-tasoitus:%Xy"
#define UI_TEXT_STRING_HM_BANGBANG_FI "BangBang"
#define UI_TEXT_STRING_HM_PID_FI "PID"
#define UI_TEXT_STRING_ACTION_FI "Toiminta:%la"
#define UI_TEXT_HEATING_EXTRUDER_FI "Kuumentaa Pursot."
#define UI_TEXT_HEATING_BED_FI "Kuumentaa Alustaa"
#define UI_TEXT_KILLED_FI "Poistettu"
#define UI_TEXT_STEPPER_DISABLED_FI "Moottori pois k" STR_auml "yt."
#define UI_TEXT_EEPROM_STOREDA_FI "Kokoonpano"
#define UI_TEXT_EEPROM_STOREDB_FI "Tallennettu EEPROM"
#define UI_TEXT_EEPROM_LOADEDA_FI "Kokoonpano"
#define UI_TEXT_EEPROM_LOADEDB_FI "Ladattu EEPROM"
#define UI_TEXT_UPLOADING_FI "Ladataan..."
#define UI_TEXT_PAGE_BUFFER_FI "Puskuri:%oB"
#define UI_TEXT_PAGE_EXTRUDER_FI " E:%ec/%Ec" cDEG "C" cARROW "%oC"
#define UI_TEXT_PAGE_EXTRUDER1_FI "E1:%e0/%E0" cDEG "C" cARROW "%o0"
#define UI_TEXT_PAGE_EXTRUDER2_FI "E2:%e1/%E1" cDEG "C" cARROW "%o1"
#define UI_TEXT_PAGE_EXTRUDER3_FI "E3:%e2/%E2" cDEG "C" cARROW "%o2"
#define UI_TEXT_PAGE_BED_FI " B:%eb/%Eb" cDEG "C" cARROW "%ob"
#define UI_TEXT_SPEED_MULTIPLY_FI "Nopeuskerroin:%om%%%"
#define UI_TEXT_FLOW_MULTIPLY_FI "Puhalluskerroin:%of%%%"
#define UI_TEXT_SHOW_MEASUREMENT_FI "N" STR_auml "yt" STR_auml " mitat"
#define UI_TEXT_RESET_MEASUREMENT_FI "Poista mitat."
#define UI_TEXT_SET_MEASURED_ORIGIN_FI "Aseta Z=0"
#define UI_TEXT_ZCALIB_FI "Z kalibrointi"
#define UI_TEXT_SET_P1_FI "Aseta P1"
#define UI_TEXT_SET_P2_FI "Aseta P2"
#define UI_TEXT_SET_P3_FI "Aseta P3"
#define UI_TEXT_CALCULATE_LEVELING_FI "Laske tasot"
#define UI_TEXT_LEVEL_FI "Taso delta"
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP_FI "Odottaa l" STR_auml "mm. %XT" cDEG "C"
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS_FI "Odottaa yks.:%XU mm"
#define UI_TEXT_SD_REMOVED_FI "SD kortti pois"
#define UI_TEXT_SD_INSERTED_FI "SD kortti on"
#define UI_TEXT_PRINTER_READY_FI "Tulostin valmis."
// Printtime output gets aggregated like <Days_5gisgits>UI_TEXT_PRINTTIME_DAYS<Hours>UI_TEXT_PRINTTIME_HOURS<Minutes>UI_TEXT_PRINTTIME_MINUTES
// ___88 days 12:45
#define UI_TEXT_PRINTTIME_DAYS_FI " p" STR_auml "iv" STR_auml STR_auml " "
#define UI_TEXT_PRINTTIME_HOURS_FI ":"
#define UI_TEXT_PRINTTIME_MINUTES_FI ""
#define UI_TEXT_PRINT_TIME_FI "Tulostusaika"
#define UI_TEXT_PRINT_FILAMENT_FI "Lanka tulostettu"
#define UI_TEXT_PRINTED_FI "Tulostettu"
#define UI_TEXT_POWER_FI "ATX virtal. on/ei"
#define UI_TEXT_STRING_HM_DEADTIME_FI "Joutoaika"
#define UI_TEXT_STRING_HM_SLOWBANG_FI "SlowBang"
#define UI_TEXT_STOP_PRINT_FI "Lopeta tulostus"
#define UI_TEXT_Z_BABYSTEPPING_FI "Z mikroaskellus:%oYmm"
#define UI_TEXT_CHANGE_FILAMENT_FI "Vaihda tulostuslanka"
#define UI_TEXT_WIZ_CH_FILAMENT1_FI "Vaihda tulostuslanka"
#define UI_TEXT_WIZ_CH_FILAMENT2_FI "Py" STR_ouml "rit" STR_auml " siirr" STR_auml ""
#define UI_TEXT_WIZ_CH_FILAMENT3_FI "Tul.lanka yl" STR_ouml "s/alas"
#define UI_TEXT_CLICK_DONE_FI "Klik kun valmis"
#define UI_TEXT_AUTOLEVEL_ONOFF_FI "Autom.taso: %ll"
#define UI_TEXT_SERVOPOS_FI "Servo paikka: %oS"
#define UI_TEXT_IGNORE_M106_FI "Ohita M106 %Fi"
#define UI_TEXT_WIZ_REHEAT1_FI "Klik uusi kuumennus"
#define UI_TEXT_WIZ_REHEAT2_FI "pursottimet"
#define UI_TEXT_WIZ_WAITTEMP1_FI "Odottaa tavoitetta"
#define UI_TEXT_WIZ_WAITTEMP2_FI "l" STR_auml "mp" STR_ouml "tilat..."
#define UI_TEXT_EXTRUDER_JAM_FI "Pursottimen tukos"
#define UI_TEXT_STANDBY_FI "Valmiina"
#define UI_TEXT_BED_COATING_FI "Alustan pinnote"
#define UI_TEXT_BED_COATING_SET1_FI "Alustan pinta valittu"
#define UI_TEXT_BED_COATING_SET2_FI ""
#define UI_TEXT_NOCOATING_FI "Ei pinnotetta"
#define UI_TEXT_BUILDTAK_FI "BuildTak"
#define UI_TEXT_KAPTON_FI "Kapton"
#define UI_TEXT_BLUETAPE_FI "Sininen paperi teippi"
#define UI_TEXT_PETTAPE_FI "Vihreä PET teippi"
#define UI_TEXT_GLUESTICK_FI "Liimapuikko"
#define UI_TEXT_CUSTOM_FI "Mukautettu"
#define UI_TEXT_COATING_CUSTOM_FI "Mukautettu:%BCmm"
#define UI_TEXT_LANGUAGE_FI "Kieli"
#if NUM_EXTRUDER > 2 || MIXING_EXTRUDER != 0
#define UI_TEXT_MAINPAGE6_1_FI "\xa %ec/%Ec\xb0 X:%x0"
#else
#define UI_TEXT_MAINPAGE6_1_FI "\xa %e0/%E0\xb0 X:%x0"
#endif // NUM_EXTRUDER
#if NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_2_FI "\xa %e1/%E1\xb0 Y:%x1"
#elif HAVE_HEATED_BED
#define UI_TEXT_MAINPAGE6_2_FI "\xe %eb/%Eb\xb0 Y:%x1"
#else
#define UI_TEXT_MAINPAGE6_2_FI " Y:%x1"
#endif
#if HAVE_HEATED_BED && NUM_EXTRUDER == 2 && MIXING_EXTRUDER == 0
#define UI_TEXT_MAINPAGE6_3_FI "\xe %eb/%Eb\xb0 Z:%x2"
#elif FEATURE_DITTO_PRINTING
#define UI_TEXT_MAINPAGE6_3_FI "Kopiot: %ed Z:%x2"
#else
#define UI_TEXT_MAINPAGE6_3_FI "Virtaus:\xfd %of%%% Z:%x2"
#endif
#define UI_TEXT_MAINPAGE6_4_FI "Mul: %om%%% \xfd E: %x4m"
#define UI_TEXT_MAINPAGE6_5_FI "Buf: %oB"
#define UI_TEXT_MAINPAGE6_6_FI "%os"
#define UI_TEXT_MAINPAGE_TEMP_BED_FI cTEMP "%ec/%Ec" cDEG "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_BED_FI "B%eB/%Eb" cDEG
#define UI_TEXT_MAINPAGE_Z_BUF_FI "Z:%x2 Buf : %oB"
#define UI_TEXT_MAINPAGE_MUL_EUSAGE_FI "Mul: %om E:%x4"
#define UI_TEXT_MAINPAGE_XY_FI "X:%x0 Y:%x1"
#define UI_TEXT_PRINT_TIME_VALUE_FI "%Ut"
#define UI_TEXT_PRINT_FILAMENT_VALUE_FI "%Uf m"
#define UI_TEXT_METER_PRINTED_FI "%Uf m " UI_TEXT_PRINTED_FI
#define UI_TEXT_STATUS_FI "%os"
#define UI_TEXT_EMPTY_FI ""
#define UI_TEXT_TEMP_SET_FI cTEMP "%ec/%Ec" cDEG
#define UI_TEXT_CURRENT_TEMP_FI cTEMP "%ec" cDEG
#define UI_TEXT_COATING_THICKNESS_FI " %BCmm"
#define UI_TEXT_EXTR3_TEMP_FI "L" STR_auml "mp" STR_ouml " 4 :%e3/%E3" cDEG "C"
#define UI_TEXT_EXTR4_TEMP_FI "L" STR_auml "mp" STR_ouml " 5 :%e4/%E4" cDEG "C"
#define UI_TEXT_EXTR5_TEMP_FI "L" STR_auml "mp" STR_ouml " 6 :%e5/%E5" cDEG "C"
#define UI_TEXT_EXTR3_OFF_FI "Pursotin 4 ei"
#define UI_TEXT_EXTR4_OFF_FI "Pursotin 5 ei"
#define UI_TEXT_EXTR5_OFF_FI "Pursotin 6 ei"
#define UI_TEXT_EXTR3_SELECT_FI "%X3 Valitse purs. 4"
#define UI_TEXT_EXTR4_SELECT_FI "%X4 Valitse purs. 5"
#define UI_TEXT_EXTR5_SELECT_FI "%X5 Valitse purs. 6"
#define UI_TEXT_DITTO_0_FI "%D0 Ei kopiota"
#define UI_TEXT_DITTO_1_FI "%D1 1 kopio"
#define UI_TEXT_DITTO_2_FI "%D2 2 kopiota"
#define UI_TEXT_DITTO_3_FI "%D3 3 kopiota"
#define UI_TEXT_ZPROBE_HEIGHT_FI "Z-anturin korkeus:%zh"
#define UI_TEXT_OFFSETS_FI "Aseta tulostimen poikkeamat"
#define UI_TEXT_X_OFFSET_FI "Aseta X poikkeama:%T0mm"
#define UI_TEXT_Y_OFFSET_FI "Aseta Y poikkeama:%T1mm"
#define UI_TEXT_Z_OFFSET_FI "Aseta Z poikkeama:%T2mm"