719 lines
21 KiB
C++
719 lines
21 KiB
C++
/*
|
|
This file is part of Repetier-Firmware.
|
|
|
|
Repetier-Firmware is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Repetier-Firmware is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Repetier-Firmware. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
This firmware is a nearly complete rewrite of the sprinter firmware
|
|
by kliment (https://github.com/kliment/Sprinter)
|
|
which based on Tonokip RepRap firmware rewrite based off of Hydra-mmm firmware.
|
|
#
|
|
Functions in this file are used to communicate using ascii or repetier protocol.
|
|
*/
|
|
|
|
#ifndef MOTION_H_INCLUDED
|
|
#define MOTION_H_INCLUDED
|
|
|
|
/** Marks the first step of a new move */
|
|
#define FLAG_WARMUP 1
|
|
#define FLAG_NOMINAL 2
|
|
#define FLAG_DECELERATING 4
|
|
#define FLAG_ACCELERATION_ENABLED 8 // unused
|
|
#define FLAG_CHECK_ENDSTOPS 16
|
|
#define FLAG_ALL_E_MOTORS 32 // For mixed extruder move all motors instead of selected motor
|
|
#define FLAG_SKIP_DEACCELERATING 64 // unused
|
|
#define FLAG_BLOCKED 128
|
|
|
|
/** Are the step parameter computed */
|
|
#define FLAG_JOIN_STEPPARAMS_COMPUTED 1
|
|
/** The right speed is fixed. Don't check this block or any block to the left. */
|
|
#define FLAG_JOIN_END_FIXED 2
|
|
/** The left speed is fixed. Don't check left block. */
|
|
#define FLAG_JOIN_START_FIXED 4
|
|
/** Start filament retraction at move start */
|
|
#define FLAG_JOIN_START_RETRACT 8
|
|
/** Wait for filament push back, before ending move */
|
|
#define FLAG_JOIN_END_RETRACT 16
|
|
/** Disable retract for this line */
|
|
#define FLAG_JOIN_NO_RETRACT 32
|
|
/** Wait for the extruder to finish it's up movement */
|
|
#define FLAG_JOIN_WAIT_EXTRUDER_UP 64
|
|
/** Wait for the extruder to finish it's down movement */
|
|
#define FLAG_JOIN_WAIT_EXTRUDER_DOWN 128
|
|
// Printing related data
|
|
#if NONLINEAR_SYSTEM
|
|
// Allow the delta cache to store segments for every line in line cache. Beware this gets big ... fast.
|
|
|
|
class PrintLine;
|
|
typedef struct
|
|
{
|
|
flag8_t dir; ///< Direction of delta movement.
|
|
uint16_t deltaSteps[TOWER_ARRAY]; ///< Number of steps in move.
|
|
inline bool checkEndstops(PrintLine *cur,bool checkall);
|
|
inline void setXMoveFinished()
|
|
{
|
|
dir &= ~XSTEP;
|
|
}
|
|
inline void setYMoveFinished()
|
|
{
|
|
dir &= ~YSTEP;
|
|
}
|
|
inline void setZMoveFinished()
|
|
{
|
|
dir &= ~ZSTEP;
|
|
}
|
|
inline void setXYMoveFinished()
|
|
{
|
|
dir &= ~XY_STEP;
|
|
}
|
|
inline bool isXPositiveMove()
|
|
{
|
|
return (dir & X_STEP_DIRPOS) == X_STEP_DIRPOS;
|
|
}
|
|
inline bool isXNegativeMove()
|
|
{
|
|
return (dir & X_STEP_DIRPOS) == XSTEP;
|
|
}
|
|
inline bool isYPositiveMove()
|
|
{
|
|
return (dir & Y_STEP_DIRPOS) == Y_STEP_DIRPOS;
|
|
}
|
|
inline bool isYNegativeMove()
|
|
{
|
|
return (dir & Y_STEP_DIRPOS) == YSTEP;
|
|
}
|
|
inline bool isZPositiveMove()
|
|
{
|
|
return (dir & Z_STEP_DIRPOS) == Z_STEP_DIRPOS;
|
|
}
|
|
inline bool isZNegativeMove()
|
|
{
|
|
return (dir & Z_STEP_DIRPOS) == ZSTEP;
|
|
}
|
|
inline bool isEPositiveMove()
|
|
{
|
|
return (dir & E_STEP_DIRPOS) == E_STEP_DIRPOS;
|
|
}
|
|
inline bool isENegativeMove()
|
|
{
|
|
return (dir & E_STEP_DIRPOS) == ESTEP;
|
|
}
|
|
inline bool isXMove()
|
|
{
|
|
return (dir & XSTEP);
|
|
}
|
|
inline bool isYMove()
|
|
{
|
|
return (dir & YSTEP);
|
|
}
|
|
inline bool isXOrYMove()
|
|
{
|
|
return dir & XY_STEP;
|
|
}
|
|
inline bool isZMove()
|
|
{
|
|
return (dir & ZSTEP);
|
|
}
|
|
inline bool isEMove()
|
|
{
|
|
return (dir & ESTEP);
|
|
}
|
|
inline bool isEOnlyMove()
|
|
{
|
|
return (dir & XYZE_STEP)==ESTEP;
|
|
}
|
|
inline bool isNoMove()
|
|
{
|
|
return (dir & XYZE_STEP) == 0;
|
|
}
|
|
inline bool isXYZMove()
|
|
{
|
|
return dir & XYZ_STEP;
|
|
}
|
|
inline bool isMoveOfAxis(uint8_t axis)
|
|
{
|
|
return (dir & (XSTEP<<axis));
|
|
}
|
|
inline void setMoveOfAxis(uint8_t axis)
|
|
{
|
|
dir |= XSTEP << axis;
|
|
}
|
|
inline void setPositiveMoveOfAxis(uint8_t axis)
|
|
{
|
|
dir |= X_STEP_DIRPOS << axis;
|
|
}
|
|
inline void setPositiveDirectionForAxis(uint8_t axis)
|
|
{
|
|
dir |= X_DIRPOS << axis;
|
|
}
|
|
} NonlinearSegment;
|
|
extern uint8_t lastMoveID;
|
|
#endif
|
|
class UIDisplay;
|
|
class PrintLine // RAM usage: 24*4+15 = 113 Byte
|
|
{
|
|
friend class UIDisplay;
|
|
#if CPU_ARCH == ARCH_ARM
|
|
static volatile bool nlFlag;
|
|
#endif
|
|
public:
|
|
static ufast8_t linesPos; // Position for executing line movement
|
|
static PrintLine lines[];
|
|
static ufast8_t linesWritePos; // Position where we write the next cached line move
|
|
ufast8_t joinFlags;
|
|
volatile ufast8_t flags;
|
|
uint8_t secondSpeed; // for laser intensity or fan control
|
|
private:
|
|
fast8_t primaryAxis;
|
|
ufast8_t dir; ///< Direction of movement. 1 = X+, 2 = Y+, 4= Z+, values can be combined.
|
|
int32_t timeInTicks;
|
|
int32_t delta[E_AXIS_ARRAY]; ///< Steps we want to move.
|
|
int32_t error[E_AXIS_ARRAY]; ///< Error calculation for Bresenham algorithm
|
|
float speedX; ///< Speed in x direction at fullInterval in mm/s
|
|
float speedY; ///< Speed in y direction at fullInterval in mm/s
|
|
float speedZ; ///< Speed in z direction at fullInterval in mm/s
|
|
float speedE; ///< Speed in E direction at fullInterval in mm/s
|
|
float fullSpeed; ///< Desired speed mm/s
|
|
float invFullSpeed; ///< 1.0/fullSpeed for faster computation
|
|
float accelerationDistance2; ///< Real 2.0*distance*acceleration mm²/s²
|
|
float maxJunctionSpeed; ///< Max. junction speed between this and next segment
|
|
float startSpeed; ///< Starting speed in mm/s
|
|
float endSpeed; ///< Exit speed in mm/s
|
|
float minSpeed;
|
|
float distance;
|
|
#if NONLINEAR_SYSTEM
|
|
uint8_t numNonlinearSegments; ///< Number of delta segments left in line. Decremented by stepper timer.
|
|
uint8_t moveID; ///< ID used to identify moves which are all part of the same line
|
|
int32_t numPrimaryStepPerSegment; ///< Number of primary Bresenham axis steps in each delta segment
|
|
NonlinearSegment segments[DELTASEGMENTS_PER_PRINTLINE];
|
|
#endif
|
|
ticks_t fullInterval; ///< interval at full speed in ticks/step.
|
|
uint16_t accelSteps; ///< How much steps does it take, to reach the plateau.
|
|
uint16_t decelSteps; ///< How much steps does it take, to reach the end speed.
|
|
uint32_t accelerationPrim; ///< Acceleration along primary axis
|
|
uint32_t fAcceleration; ///< accelerationPrim*262144/F_CPU
|
|
speed_t vMax; ///< Maximum reached speed in steps/s.
|
|
speed_t vStart; ///< Starting speed in steps/s.
|
|
speed_t vEnd; ///< End speed in steps/s
|
|
#if USE_ADVANCE
|
|
#if ENABLE_QUADRATIC_ADVANCE
|
|
int32_t advanceRate; ///< Advance steps at full speed
|
|
int32_t advanceFull; ///< Maximum advance at fullInterval [steps*65536]
|
|
int32_t advanceStart;
|
|
int32_t advanceEnd;
|
|
#endif
|
|
uint16_t advanceL; ///< Recomputed L value
|
|
#endif
|
|
#ifdef DEBUG_STEPCOUNT
|
|
int32_t totalStepsRemaining;
|
|
#endif
|
|
public:
|
|
int32_t stepsRemaining; ///< Remaining steps, until move is finished
|
|
static PrintLine *cur;
|
|
static volatile ufast8_t linesCount; // Number of lines cached 0 = nothing to do
|
|
inline bool areParameterUpToDate()
|
|
{
|
|
return joinFlags & FLAG_JOIN_STEPPARAMS_COMPUTED;
|
|
}
|
|
inline void invalidateParameter()
|
|
{
|
|
joinFlags &= ~FLAG_JOIN_STEPPARAMS_COMPUTED;
|
|
}
|
|
inline void setParameterUpToDate()
|
|
{
|
|
joinFlags |= FLAG_JOIN_STEPPARAMS_COMPUTED;
|
|
}
|
|
inline bool isStartSpeedFixed()
|
|
{
|
|
return joinFlags & FLAG_JOIN_START_FIXED;
|
|
}
|
|
inline void setStartSpeedFixed(bool newState)
|
|
{
|
|
joinFlags = (newState ? joinFlags | FLAG_JOIN_START_FIXED : joinFlags & ~FLAG_JOIN_START_FIXED);
|
|
}
|
|
inline void fixStartAndEndSpeed()
|
|
{
|
|
joinFlags |= FLAG_JOIN_END_FIXED | FLAG_JOIN_START_FIXED;
|
|
}
|
|
inline bool isEndSpeedFixed()
|
|
{
|
|
return joinFlags & FLAG_JOIN_END_FIXED;
|
|
}
|
|
inline void setEndSpeedFixed(bool newState)
|
|
{
|
|
joinFlags = (newState ? joinFlags | FLAG_JOIN_END_FIXED : joinFlags & ~FLAG_JOIN_END_FIXED);
|
|
}
|
|
inline bool isWarmUp()
|
|
{
|
|
return flags & FLAG_WARMUP;
|
|
}
|
|
inline uint8_t getWaitForXLinesFilled()
|
|
{
|
|
return primaryAxis;
|
|
}
|
|
inline void setWaitForXLinesFilled(uint8_t b)
|
|
{
|
|
primaryAxis = b;
|
|
}
|
|
inline bool isExtruderForwardMove()
|
|
{
|
|
return (dir & E_STEP_DIRPOS)==E_STEP_DIRPOS;
|
|
}
|
|
inline void block()
|
|
{
|
|
flags |= FLAG_BLOCKED;
|
|
}
|
|
inline void unblock()
|
|
{
|
|
flags &= ~FLAG_BLOCKED;
|
|
}
|
|
inline bool isBlocked()
|
|
{
|
|
return flags & FLAG_BLOCKED;
|
|
}
|
|
inline bool isAllEMotors() {
|
|
return flags & FLAG_ALL_E_MOTORS;
|
|
}
|
|
inline bool isCheckEndstops()
|
|
{
|
|
return flags & FLAG_CHECK_ENDSTOPS;
|
|
}
|
|
inline bool isNominalMove()
|
|
{
|
|
return flags & FLAG_NOMINAL;
|
|
}
|
|
inline void setNominalMove()
|
|
{
|
|
flags |= FLAG_NOMINAL;
|
|
}
|
|
inline void checkEndstops()
|
|
{
|
|
if(isCheckEndstops())
|
|
{
|
|
Endstops::update();
|
|
if(isXNegativeMove() && Endstops::xMin())
|
|
setXMoveFinished();
|
|
else if(isXPositiveMove() && Endstops::xMax())
|
|
setXMoveFinished();
|
|
if(isYNegativeMove() && Endstops::yMin())
|
|
setYMoveFinished();
|
|
else if(isYPositiveMove() && Endstops::yMax())
|
|
setYMoveFinished();
|
|
#if FEATURE_Z_PROBE
|
|
if(Printer::isZProbingActive() && isZNegativeMove() && Endstops::zProbe())
|
|
{
|
|
setZMoveFinished();
|
|
Printer::stepsRemainingAtZHit = stepsRemaining;
|
|
}
|
|
else
|
|
#endif
|
|
if(isZNegativeMove() && Endstops::zMin())
|
|
{
|
|
setZMoveFinished();
|
|
}
|
|
else if(isZPositiveMove() && Endstops::zMax())
|
|
{
|
|
#if MAX_HARDWARE_ENDSTOP_Z
|
|
Printer::stepsRemainingAtZHit = stepsRemaining;
|
|
#endif
|
|
setZMoveFinished();
|
|
}
|
|
}
|
|
#if FEATURE_Z_PROBE
|
|
else if(Printer::isZProbingActive() && isZNegativeMove()) {
|
|
Endstops::update();
|
|
if(Endstops::zProbe())
|
|
{
|
|
setZMoveFinished();
|
|
Printer::stepsRemainingAtZHit = stepsRemaining;
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
inline void setXMoveFinished()
|
|
{
|
|
#if DRIVE_SYSTEM==XY_GANTRY || DRIVE_SYSTEM==YX_GANTRY
|
|
dir &= ~48;
|
|
#elif DRIVE_SYSTEM==XZ_GANTRY || DRIVE_SYSTEM==ZX_GANTRY
|
|
dir &= ~80
|
|
#else
|
|
dir &= ~16;
|
|
#endif
|
|
}
|
|
inline void setYMoveFinished()
|
|
{
|
|
#if DRIVE_SYSTEM==XY_GANTRY || DRIVE_SYSTEM==YX_GANTRY
|
|
dir &= ~48;
|
|
#else
|
|
dir &= ~32;
|
|
#endif
|
|
}
|
|
inline void setZMoveFinished()
|
|
{
|
|
#if DRIVE_SYSTEM==XZ_GANTRY || DRIVE_SYSTEM==ZX_GANTRY
|
|
dir &= ~80
|
|
#else
|
|
dir &= ~64;
|
|
#endif
|
|
}
|
|
inline void setXYMoveFinished()
|
|
{
|
|
dir &= ~48;
|
|
}
|
|
inline bool isXPositiveMove()
|
|
{
|
|
return (dir & X_STEP_DIRPOS) == X_STEP_DIRPOS;
|
|
}
|
|
inline bool isXNegativeMove()
|
|
{
|
|
return (dir & X_STEP_DIRPOS) == XSTEP;
|
|
}
|
|
inline bool isYPositiveMove()
|
|
{
|
|
return (dir & Y_STEP_DIRPOS) == Y_STEP_DIRPOS;
|
|
}
|
|
inline bool isYNegativeMove()
|
|
{
|
|
return (dir & Y_STEP_DIRPOS) == YSTEP;
|
|
}
|
|
inline bool isZPositiveMove()
|
|
{
|
|
return (dir & Z_STEP_DIRPOS) == Z_STEP_DIRPOS;
|
|
}
|
|
inline bool isZNegativeMove()
|
|
{
|
|
return (dir & Z_STEP_DIRPOS) == ZSTEP;
|
|
}
|
|
inline bool isEPositiveMove()
|
|
{
|
|
return (dir & E_STEP_DIRPOS) == E_STEP_DIRPOS;
|
|
}
|
|
inline bool isENegativeMove()
|
|
{
|
|
return (dir & E_STEP_DIRPOS) == ESTEP;
|
|
}
|
|
inline bool isXMove()
|
|
{
|
|
return (dir & XSTEP);
|
|
}
|
|
inline bool isYMove()
|
|
{
|
|
return (dir & YSTEP);
|
|
}
|
|
inline bool isXOrYMove()
|
|
{
|
|
return dir & XY_STEP;
|
|
}
|
|
inline bool isXOrZMove()
|
|
{
|
|
return dir & (XSTEP | YSTEP);
|
|
}
|
|
inline bool isZMove()
|
|
{
|
|
return (dir & ZSTEP);
|
|
}
|
|
inline bool isEMove()
|
|
{
|
|
return (dir & ESTEP);
|
|
}
|
|
inline bool isEOnlyMove()
|
|
{
|
|
return (dir & XYZE_STEP) == ESTEP;
|
|
}
|
|
inline bool isNoMove()
|
|
{
|
|
return (dir & XYZE_STEP) == 0;
|
|
}
|
|
inline bool isXYZMove()
|
|
{
|
|
return dir & XYZ_STEP;
|
|
}
|
|
inline bool isMoveOfAxis(uint8_t axis)
|
|
{
|
|
return (dir & (XSTEP << axis));
|
|
}
|
|
inline void setMoveOfAxis(uint8_t axis)
|
|
{
|
|
dir |= XSTEP << axis;
|
|
}
|
|
inline void setPositiveDirectionForAxis(uint8_t axis)
|
|
{
|
|
dir |= X_DIRPOS << axis;
|
|
}
|
|
inline static void resetPathPlanner()
|
|
{
|
|
linesCount = 0;
|
|
linesPos = linesWritePos;
|
|
Printer::setMenuMode(MENU_MODE_PRINTING, false);
|
|
}
|
|
// Only called from bresenham -> inside interrupt handle
|
|
inline void updateAdvanceSteps(speed_t v, uint8_t max_loops, bool accelerate)
|
|
{
|
|
#if USE_ADVANCE
|
|
if(!Printer::isAdvanceActivated()) return;
|
|
#if ENABLE_QUADRATIC_ADVANCE
|
|
long advanceTarget = Printer::advanceExecuted;
|
|
if(accelerate)
|
|
{
|
|
for(uint8_t loop = 0; loop < max_loops; loop++) advanceTarget += advanceRate;
|
|
if(advanceTarget > advanceFull)
|
|
advanceTarget = advanceFull;
|
|
}
|
|
else
|
|
{
|
|
for(uint8_t loop = 0; loop < max_loops; loop++) advanceTarget -= advanceRate;
|
|
if(advanceTarget < advanceEnd)
|
|
advanceTarget = advanceEnd;
|
|
}
|
|
long h = HAL::mulu16xu16to32(v, advanceL);
|
|
int tred = ((advanceTarget + h) >> 16);
|
|
HAL::forbidInterrupts();
|
|
Printer::extruderStepsNeeded += tred - Printer::advanceStepsSet;
|
|
if(tred > 0 && Printer::advanceStepsSet <= 0)
|
|
Printer::extruderStepsNeeded += Extruder::current->advanceBacklash;
|
|
else if(tred < 0 && Printer::advanceStepsSet >= 0)
|
|
Printer::extruderStepsNeeded -= Extruder::current->advanceBacklash;
|
|
Printer::advanceStepsSet = tred;
|
|
HAL::allowInterrupts();
|
|
Printer::advanceExecuted = advanceTarget;
|
|
#else
|
|
int tred = HAL::mulu6xu16shift16(v, advanceL);
|
|
HAL::forbidInterrupts();
|
|
Printer::extruderStepsNeeded += tred - Printer::advanceStepsSet;
|
|
if(tred > 0 && Printer::advanceStepsSet <= 0)
|
|
Printer::extruderStepsNeeded += (Extruder::current->advanceBacklash << 1);
|
|
else if(tred < 0 && Printer::advanceStepsSet >= 0)
|
|
Printer::extruderStepsNeeded -= (Extruder::current->advanceBacklash << 1);
|
|
Printer::advanceStepsSet = tred;
|
|
HAL::allowInterrupts();
|
|
#endif
|
|
#endif
|
|
}
|
|
INLINE bool moveDecelerating()
|
|
{
|
|
if(stepsRemaining <= decelSteps)
|
|
{
|
|
if (!(flags & FLAG_DECELERATING))
|
|
{
|
|
Printer::timer = 0;
|
|
flags |= FLAG_DECELERATING;
|
|
}
|
|
return true;
|
|
}
|
|
else return false;
|
|
}
|
|
INLINE bool moveAccelerating()
|
|
{
|
|
return Printer::stepNumber <= accelSteps;
|
|
}
|
|
INLINE void startXStep()
|
|
{
|
|
#if !(GANTRY) || defined(FAST_COREXYZ)
|
|
Printer::startXStep();
|
|
#else
|
|
#if DRIVE_SYSTEM == XY_GANTRY || DRIVE_SYSTEM == XZ_GANTRY
|
|
if(isXPositiveMove())
|
|
{
|
|
Printer::motorX++;
|
|
Printer::motorYorZ++;
|
|
}
|
|
else
|
|
{
|
|
Printer::motorX--;
|
|
Printer::motorYorZ--;
|
|
}
|
|
#endif
|
|
#if DRIVE_SYSTEM == YX_GANTRY || DRIVE_SYSTEM == ZX_GANTRY
|
|
if(isXPositiveMove())
|
|
{
|
|
Printer::motorX++;
|
|
Printer::motorYorZ--;
|
|
}
|
|
else
|
|
{
|
|
Printer::motorX--;
|
|
Printer::motorYorZ++;
|
|
}
|
|
#endif
|
|
#endif
|
|
#ifdef DEBUG_STEPCOUNT
|
|
totalStepsRemaining--;
|
|
#endif
|
|
}
|
|
INLINE void startYStep()
|
|
{
|
|
#if !(GANTRY) || DRIVE_SYSTEM == ZX_GANTRY || DRIVE_SYSTEM == XZ_GANTRY || defined(FAST_COREXYZ)
|
|
Printer::startYStep();
|
|
#else
|
|
#if DRIVE_SYSTEM == XY_GANTRY
|
|
if(isYPositiveMove())
|
|
{
|
|
Printer::motorX++;
|
|
Printer::motorYorZ--;
|
|
}
|
|
else
|
|
{
|
|
Printer::motorX--;
|
|
Printer::motorYorZ++;
|
|
}
|
|
#endif
|
|
#if DRIVE_SYSTEM == YX_GANTRY
|
|
if(isYPositiveMove())
|
|
{
|
|
Printer::motorX++;
|
|
Printer::motorYorZ++;
|
|
}
|
|
else
|
|
{
|
|
Printer::motorX--;
|
|
Printer::motorYorZ--;
|
|
}
|
|
#endif
|
|
#endif // GANTRY
|
|
#ifdef DEBUG_STEPCOUNT
|
|
totalStepsRemaining--;
|
|
#endif
|
|
|
|
}
|
|
INLINE void startZStep()
|
|
{
|
|
#if !(GANTRY) || DRIVE_SYSTEM == YX_GANTRY || DRIVE_SYSTEM == XY_GANTRY || defined(FAST_COREXYZ)
|
|
Printer::startZStep();
|
|
#else
|
|
#if DRIVE_SYSTEM == XZ_GANTRY
|
|
if(isZPositiveMove())
|
|
{
|
|
Printer::motorX++;
|
|
Printer::motorYorZ--;
|
|
}
|
|
else
|
|
{
|
|
Printer::motorX--;
|
|
Printer::motorYorZ++;
|
|
}
|
|
#endif
|
|
#if DRIVE_SYSTEM == ZX_GANTRY
|
|
if(isZPositiveMove())
|
|
{
|
|
Printer::motorX++;
|
|
Printer::motorYorZ++;
|
|
}
|
|
else
|
|
{
|
|
Printer::motorX--;
|
|
Printer::motorYorZ--;
|
|
}
|
|
#endif
|
|
#endif
|
|
#ifdef DEBUG_STEPCOUNT
|
|
totalStepsRemaining--;
|
|
#endif
|
|
}
|
|
void updateStepsParameter();
|
|
float safeSpeed(fast8_t drivingAxis);
|
|
void calculateMove(float axis_diff[],uint8_t pathOptimize,fast8_t distanceBase);
|
|
void logLine();
|
|
INLINE long getWaitTicks()
|
|
{
|
|
return timeInTicks;
|
|
}
|
|
INLINE void setWaitTicks(long wait)
|
|
{
|
|
timeInTicks = wait;
|
|
}
|
|
|
|
static INLINE bool hasLines()
|
|
{
|
|
return linesCount;
|
|
}
|
|
static INLINE void setCurrentLine()
|
|
{
|
|
cur = &lines[linesPos];
|
|
#if CPU_ARCH==ARCH_ARM
|
|
PrintLine::nlFlag = true;
|
|
#endif
|
|
}
|
|
// Only called from within interrupts
|
|
static INLINE void removeCurrentLineForbidInterrupt()
|
|
{
|
|
linesPos++;
|
|
if(linesPos >= PRINTLINE_CACHE_SIZE) linesPos = 0;
|
|
cur = NULL;
|
|
#if CPU_ARCH == ARCH_ARM
|
|
nlFlag = false;
|
|
#endif
|
|
HAL::forbidInterrupts();
|
|
--linesCount;
|
|
if(!linesCount)
|
|
Printer::setMenuMode(MENU_MODE_PRINTING, false);
|
|
}
|
|
static INLINE void pushLine()
|
|
{
|
|
linesWritePos++;
|
|
if(linesWritePos >= PRINTLINE_CACHE_SIZE) linesWritePos = 0;
|
|
Printer::setMenuMode(MENU_MODE_PRINTING, true);
|
|
InterruptProtectedBlock noInts;
|
|
linesCount++;
|
|
}
|
|
static uint8_t getLinesCount()
|
|
{
|
|
InterruptProtectedBlock noInts;
|
|
return linesCount;
|
|
}
|
|
static PrintLine *getNextWriteLine()
|
|
{
|
|
return &lines[linesWritePos];
|
|
}
|
|
static inline void computeMaxJunctionSpeed(PrintLine *previous,PrintLine *current);
|
|
static int32_t bresenhamStep();
|
|
static void waitForXFreeLines(uint8_t b=1, bool allowMoves = false);
|
|
static inline void forwardPlanner(ufast8_t p);
|
|
static inline void backwardPlanner(ufast8_t p,ufast8_t last);
|
|
static void updateTrapezoids();
|
|
static uint8_t insertWaitMovesIfNeeded(uint8_t pathOptimize, uint8_t waitExtraLines);
|
|
#if !NONLINEAR_SYSTEM
|
|
static void queueCartesianMove(uint8_t check_endstops,uint8_t pathOptimize);
|
|
#if DISTORTION_CORRECTION
|
|
static void queueCartesianSegmentTo(uint8_t check_endstops, uint8_t pathOptimize);
|
|
#endif
|
|
#endif
|
|
static void moveRelativeDistanceInSteps(int32_t x,int32_t y,int32_t z,int32_t e,float feedrate,bool waitEnd,bool check_endstop,bool pathOptimize = true);
|
|
static void moveRelativeDistanceInStepsReal(int32_t x,int32_t y,int32_t z,int32_t e,float feedrate,bool waitEnd,bool pathOptimize = true);
|
|
#if ARC_SUPPORT
|
|
static void arc(float *position, float *target, float *offset, float radius, uint8_t isclockwise);
|
|
#endif
|
|
static INLINE void previousPlannerIndex(ufast8_t &p)
|
|
{
|
|
p = (p ? p - 1 : PRINTLINE_CACHE_SIZE - 1);
|
|
}
|
|
static INLINE void nextPlannerIndex(ufast8_t& p)
|
|
{
|
|
p = (p == PRINTLINE_CACHE_SIZE - 1 ? 0 : p + 1);
|
|
}
|
|
#if NONLINEAR_SYSTEM
|
|
static uint8_t queueNonlinearMove(uint8_t check_endstops,uint8_t pathOptimize, uint8_t softEndstop);
|
|
static inline void queueEMove(int32_t e_diff,uint8_t check_endstops,uint8_t pathOptimize);
|
|
inline uint16_t calculateNonlinearSubSegments(uint8_t softEndstop);
|
|
static inline void calculateDirectionAndDelta(int32_t difference[], ufast8_t *dir, int32_t delta[]);
|
|
static inline uint8_t calculateDistance(float axis_diff[], uint8_t dir, float *distance);
|
|
#if SOFTWARE_LEVELING && DRIVE_SYSTEM == DELTA
|
|
static void calculatePlane(int32_t factors[], int32_t p1[], int32_t p2[], int32_t p3[]);
|
|
static float calcZOffset(int32_t factors[], int32_t pointX, int32_t pointY);
|
|
#endif
|
|
#endif
|
|
};
|
|
|
|
|
|
|
|
#endif // MOTION_H_INCLUDED
|