375 lines
9.9 KiB
C++
375 lines
9.9 KiB
C++
/**********************************************************************
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2015 Nis Wechselberg
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
**********************************************************************/
|
|
|
|
/**********************************************************************
|
|
* ESP8266-MQTT-Teufel-DS5-Control
|
|
*
|
|
* Links the ESP8266 based control board to an mqtt broker.
|
|
* The program uses multiple topics for incoming and outgoing messages.
|
|
* Incoming topics:
|
|
* - <mqtt_device>/command
|
|
* Outgoing topics:
|
|
* - <mqtt_device>/powerState
|
|
**********************************************************************/
|
|
#include <ESP8266WiFi.h>
|
|
#include <ESP8266mDNS.h>
|
|
#include <WiFiUdp.h>
|
|
#include <ArduinoOTA.h>
|
|
#include <PubSubClient.h>
|
|
#include "ESP8266-MQTT-Teufel-DS5.h"
|
|
|
|
#define DEBUGTOSERIAL 1
|
|
|
|
// Timing for publishing powerState
|
|
unsigned long lastMsg = 0;
|
|
unsigned long publishInterval = 5000;
|
|
|
|
// Message buffer
|
|
char msg[50];
|
|
|
|
// Last known state
|
|
int powerState = 0;
|
|
|
|
// Volume control. Valid range is [-55,10]
|
|
int curVol = 0;
|
|
int targetVol = 0;
|
|
unsigned long lastVolChange = 0;
|
|
unsigned long volumeInterval = 500;
|
|
unsigned long volDisplayDelay = 7000;
|
|
uint8_t otherCommandSend = 0;
|
|
// Process tracker for calibration. 0 = nothing, 1 = decreasing, 2 = increasing
|
|
uint8_t recalibrateState = 0;
|
|
int calibrateLowerLimit = -55;
|
|
int calibrateUpperLimit = -22;
|
|
|
|
// Pin config
|
|
const int irSendPin = 13;
|
|
const int powerProbePin = 12;
|
|
|
|
// Global mqtt client object
|
|
WiFiClient espClient;
|
|
PubSubClient client(espClient);
|
|
|
|
// Command/code mapping
|
|
char* commands[] = {
|
|
"power", "mute", "51", "opt1",
|
|
"opt2", "coax1", "coax2", "tv",
|
|
"cd", "aux", "display", "return",
|
|
"mode", "speaker", "test", //"volUp",
|
|
"left", "ok", "right", //"volDown",
|
|
"fLeft", "center", "fRight", "sLeft",
|
|
"sub", "sRight"};
|
|
uint32_t codes[] = {
|
|
0x807F50AF, 0x807FD02F, 0x807F708F, 0x807F609F,
|
|
0x807FF00F, 0x807F48B7, 0x807FE01F, 0x807FC837,
|
|
0x807F6897, 0x807F40BF, 0x807FE817, 0x807FC03F,
|
|
0x807FE21D, 0x807F629D, 0x807FA25D, //0x807F7A85,
|
|
0x807FDA25, 0x807F5AA5, 0x807F1AE5, //0x807F6A95,
|
|
0x807FCA35, 0x807F4AB5, 0x807F8A75, 0x807FF20D,
|
|
0x807F728D, 0x807FB24D};
|
|
|
|
/*
|
|
* Initial setup for arduino
|
|
*/
|
|
void setup() {
|
|
|
|
// Configure pins
|
|
pinMode(irSendPin, OUTPUT);
|
|
digitalWrite(irSendPin, HIGH);
|
|
|
|
// Configure serial port
|
|
Serial.begin(115200);
|
|
delay(10);
|
|
|
|
// Prepare WiFi connection
|
|
setup_wifi();
|
|
|
|
// Connect to mqtt broker
|
|
client.setServer(mqtt_server, 1883);
|
|
client.setCallback(incoming_mqtt);
|
|
}
|
|
|
|
/*
|
|
* Prepares the wireless connection
|
|
*/
|
|
void setup_wifi() {
|
|
// Connect to the WiFi as a client
|
|
WiFi.mode(WIFI_STA);
|
|
|
|
// Do the connection
|
|
if (DEBUGTOSERIAL) {
|
|
Serial.println();
|
|
Serial.print("Connecting to ");
|
|
Serial.println(ssid);
|
|
}
|
|
WiFi.begin(ssid, password);
|
|
while (WiFi.status() != WL_CONNECTED) {
|
|
delay(500);
|
|
if (DEBUGTOSERIAL) {
|
|
Serial.print(".");
|
|
}
|
|
}
|
|
if (DEBUGTOSERIAL) {
|
|
Serial.println("");
|
|
Serial.println("WiFi connected");
|
|
|
|
// Print IP address to serial
|
|
Serial.print("My IP address: ");
|
|
Serial.println(WiFi.localIP());
|
|
}
|
|
ArduinoOTA.setHostname(ota_hostname);
|
|
ArduinoOTA.setPassword(ota_hostname);
|
|
ArduinoOTA.begin();
|
|
}
|
|
|
|
/*
|
|
* Callback method for incoming mqtt messages
|
|
*/
|
|
void incoming_mqtt(char* topic, byte* payload, unsigned int length) {
|
|
if (DEBUGTOSERIAL) {
|
|
Serial.print("Message arrived [");
|
|
Serial.print(topic);
|
|
Serial.print("] ");
|
|
for (uint8_t i = 0; i < length; i++) {
|
|
Serial.print((char)payload[i]);
|
|
}
|
|
Serial.println();
|
|
}
|
|
|
|
char* msgCopy = (char*) malloc(length + 1);
|
|
memcpy(msgCopy, payload, length);
|
|
msgCopy[length] = 0;
|
|
|
|
// Variable to store the IR code
|
|
uint32_t code = 0;
|
|
|
|
if (strcmp(topic, mqtt_topic_command) == 0) {
|
|
// Regular command channel triggered
|
|
for (uint8_t i = 0; i < 24; ++i) {
|
|
// Compare payload against known commands
|
|
if (strcmp(msgCopy, commands[i]) == 0) {
|
|
// Store code and be done
|
|
code = codes[i];
|
|
break;
|
|
}
|
|
}
|
|
// Check other special commands
|
|
if (strcmp(msgCopy, "volReset") == 0) {
|
|
// Recalibrate volume
|
|
recalibrateState = 1;
|
|
curVol = 10;
|
|
targetVol = calibrateLowerLimit;
|
|
}
|
|
if (strcmp(msgCopy, "volUp") == 0) {
|
|
if (recalibrateState == 0 && targetVol < 10) {
|
|
if (DEBUGTOSERIAL) {
|
|
Serial.print("Setting target volume to ");
|
|
Serial.println(targetVol + 1);
|
|
}
|
|
targetVol += 1;
|
|
}
|
|
}
|
|
if (strcmp(msgCopy, "volDown") == 0) {
|
|
if (recalibrateState == 0 && targetVol > -55) {
|
|
if (DEBUGTOSERIAL) {
|
|
Serial.print("Setting target volume to ");
|
|
Serial.println(targetVol - 1);
|
|
}
|
|
targetVol -= 1;
|
|
}
|
|
}
|
|
}
|
|
if (strcmp(topic, mqtt_topic_volume) == 0) {
|
|
int newTargetVol = atoi(msgCopy);
|
|
if (recalibrateState == 0) {
|
|
if (DEBUGTOSERIAL) {
|
|
Serial.print("Setting target volume to ");
|
|
Serial.println(newTargetVol);
|
|
}
|
|
targetVol = newTargetVol;
|
|
}
|
|
}
|
|
|
|
if (strcmp(topic, mqtt_topic_power) == 0) {
|
|
code = codes[0];
|
|
}
|
|
|
|
free(msgCopy);
|
|
|
|
// Check if we found a code to send
|
|
if (code != 0) {
|
|
replicateNEC(irSendPin, code, 32);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Blocking reconnect to the mqtt broker
|
|
*/
|
|
void reconnect() {
|
|
// Loop until we're reconnected
|
|
while (!client.connected()) {
|
|
if (DEBUGTOSERIAL) {
|
|
Serial.print("Attempting MQTT connection...");
|
|
}
|
|
// Attempt to connect
|
|
if (client.connect(mqtt_device)) {
|
|
if (DEBUGTOSERIAL) {
|
|
Serial.println("connected");
|
|
}
|
|
// subscribe to incoming topics
|
|
client.subscribe(mqtt_topic_command);
|
|
client.subscribe(mqtt_topic_volume);
|
|
client.subscribe(mqtt_topic_power);
|
|
if (DEBUGTOSERIAL) {
|
|
Serial.println("Subscriptions done");
|
|
}
|
|
|
|
} else {
|
|
if (DEBUGTOSERIAL) {
|
|
Serial.print("failed, rc=");
|
|
Serial.print(client.state());
|
|
Serial.println(" try again in 5 seconds");
|
|
}
|
|
// Wait 5 seconds before retrying
|
|
delay(5000);
|
|
}
|
|
}
|
|
}
|
|
|
|
void updateState() {
|
|
// Read value from digital pin (Levels are inverted)
|
|
powerState = digitalRead(powerProbePin);
|
|
|
|
if (DEBUGTOSERIAL) {
|
|
Serial.print("New power state determined: ");
|
|
Serial.println(powerState);
|
|
}
|
|
|
|
snprintf(msg, 49, "%d", powerState);
|
|
client.publish(mqtt_topic_powerState, msg);
|
|
|
|
// Update volume state
|
|
snprintf(msg, 49, "%d", curVol);
|
|
client.publish(mqtt_topic_volumeState, msg);
|
|
}
|
|
|
|
void updateVolume(unsigned long timeSinceChange) {
|
|
|
|
if (otherCommandSend || timeSinceChange > volDisplayDelay) {
|
|
// Switch display to volume mode
|
|
replicateNEC(irSendPin, 0x807F7A85, 32);
|
|
} else {
|
|
// Increase volume a notch if requested
|
|
if (targetVol > curVol) {
|
|
replicateNEC(irSendPin, 0x807F7A85, 32);
|
|
curVol += 1;
|
|
|
|
snprintf(msg, 49, "%d", curVol);
|
|
client.publish(mqtt_topic_volumeState, msg);
|
|
}
|
|
|
|
// Decrease volume a notch if requested
|
|
if (targetVol < curVol) {
|
|
replicateNEC(irSendPin, 0x807F6A95, 32);
|
|
curVol -= 1;
|
|
|
|
snprintf(msg, 49, "%d", curVol);
|
|
client.publish(mqtt_topic_volumeState, msg);
|
|
}
|
|
|
|
// Check recalibration state
|
|
if (recalibrateState == 2 && curVol == calibrateUpperLimit) {
|
|
recalibrateState = 0;
|
|
}
|
|
if (recalibrateState == 1 && curVol == calibrateLowerLimit) {
|
|
recalibrateState = 2;
|
|
targetVol = calibrateUpperLimit;
|
|
}
|
|
}
|
|
}
|
|
|
|
void replicateNEC(int pin, uint32_t data, int dataLength) {
|
|
|
|
// Track if some other command than volume control has been sent in the meantime
|
|
if (data == 0x807F7A85 || data == 0x807F6A95) {
|
|
otherCommandSend = 0;
|
|
} else {
|
|
otherCommandSend = 1;
|
|
}
|
|
|
|
if (DEBUGTOSERIAL) {
|
|
Serial.print("Sending code ");
|
|
Serial.println(data, HEX);
|
|
}
|
|
// Prepare mask
|
|
uint32_t mask = 1L << (dataLength -1);
|
|
// Write initial 9ms+4.5ms pulse
|
|
digitalWrite(pin, LOW);
|
|
delayMicroseconds(9000);
|
|
digitalWrite(pin, HIGH);
|
|
delayMicroseconds(4500);
|
|
|
|
// Write pulses from data
|
|
while (mask > 0) {
|
|
digitalWrite(pin, LOW);
|
|
delayMicroseconds(562);
|
|
digitalWrite(pin, HIGH);
|
|
delayMicroseconds(562);
|
|
if (data & mask) {
|
|
delayMicroseconds(1124);
|
|
}
|
|
mask = mask >> 1;
|
|
}
|
|
|
|
// Write trailing pulse
|
|
digitalWrite(pin, LOW);
|
|
delayMicroseconds(562);
|
|
digitalWrite(pin, HIGH);
|
|
}
|
|
|
|
void loop() {
|
|
// Check OTA update
|
|
ArduinoOTA.handle();
|
|
|
|
// Ensure MQTT connection
|
|
if (!client.connected()) {
|
|
reconnect();
|
|
}
|
|
|
|
// Check the inbox
|
|
client.loop();
|
|
|
|
// Maybe update the volume
|
|
unsigned long now = millis();
|
|
if (targetVol != curVol && now - lastVolChange > volumeInterval) {
|
|
updateVolume(now - lastVolChange);
|
|
lastVolChange = now;
|
|
}
|
|
|
|
// Maybe push the current status
|
|
if (now - lastMsg > publishInterval) {
|
|
lastMsg = now;
|
|
updateState();
|
|
}
|
|
}
|